Advertisement

Effect of Plastic Fines on Shear Strength of Sands

  • N. Umaharathi
  • K. P. Bhargav Kumar
  • Balunaini Umashankar
Conference paper
Part of the Lecture Notes in Civil Engineering book series (LNCE, volume 16)

Abstract

Natural sands are rarely found as clean sands. They contain considerable amounts of plastic (clay) or non-plastic (silt) fines. If fines are present in sufficient quantity to separate the sand particles, soil behavior will be significantly controlled by the fines. The fabric of such a soil is referred to as floating fabric. Characterization of sand with the presence of fines is important in the design of geotechnical structures. This paper presents a detailed study focused on investigating the effect of plastic fines on the engineering properties of sand–fines mixture. Mixtures of sand and fines are prepared by mixing clean sand with plastic fines (clay). Indian Standard (IS) Grade II sand, widely known under the name of Ennore sand, is used during experimentation. This sand used is classified as poorly graded (SP) as per Unified Soil Classification System (USCS). Plastic fines are obtained locally, and the liquid limit (LL) and the plasticity index (PI) are found to be equal to 65 and 39%, respectively. The effect of plastic fines on shear strength of sands is studied using direct shear testing conducted in displacement-controlled mode. Tests are performed at 0.5 mm/min, and the samples are subjected to three normal stresses—50, 100, and 150 kPa. In addition to determining the shear strength, this study also focused on volumetric changes of specimens during shearing in a direct shear box. Tests are conducted on specimens of sand with various fines content ranging from 0 to 25%, while maintaining a constant total density of 1.7 g/cc throughout. Plots of shear stress versus horizontal displacement of lower box, and vertical displacement versus horizontal displacement are reported. The shear strength envelopes of sand specimens prepared at various percentages of fines are proposed. The test results showed that both friction angle and apparent cohesion decrease with increase in fines content in sand–fines mixture, thereby shifting the shear envelope downwards. In addition, there is a consistent decrease in peak shear strength with increase in fines content.

Keywords

Plastic fines Shear strength Friction angle Cohesion 

References

  1. Carraro, J., Antonio, H., Prezzi, M., & Salgado, R. (2009). Shear strength and stiffness of sands containing plastic or nonplastic fines. Journal of Geotechnical and Geoenvironmental Engineering, 135(9), 1167–1178.CrossRefGoogle Scholar
  2. Durga Prasad, B., Hari Prasad, C., & Umashankar, B. (2014). Shear strength of IS sand under various normal stress. In Indian Geotechnical Conference (IGC-2014), Kakinada (pp. 109–113).Google Scholar
  3. Prasad, A., & Pandey, B. (2013). Effect of fines on the mechanical behavior of sand. International Journal of Structural and Civil Engineering Research, 2(2), 41–47.Google Scholar
  4. Salgado, R. (2006). The engineering of foundations (p. 181). McGraw-Hill Education.Google Scholar
  5. Salgado, R., Bandini, P., & Karim, A. (2000). Shear strength and stiffness of silty sand. Journal of Geotechnical and Geoenvironmental Engineering, 126(4), 451–462.  https://doi.org/10.1061/(asce)10900241.CrossRefGoogle Scholar
  6. Yang, S., Lacasse, S., & Sandven, R. (2006). Determination of the transitional fines content of mixtures of sand and non-plastic fines. Geotechnical Testing Journal, 29(2), 1–6.Google Scholar

Copyright information

© Springer Nature Singapore Pte Ltd. 2019

Authors and Affiliations

  • N. Umaharathi
    • 1
  • K. P. Bhargav Kumar
    • 1
  • Balunaini Umashankar
    • 1
  1. 1.Department of Civil EngineeringIndian Institute of Technology HyderabadKandiIndia

Personalised recommendations