Preparation and Optoelectronic Properties of CuI Films by Pulling and Chemical Vapor Deposition

Conference paper
Part of the Springer Proceedings in Energy book series (SPE)

Abstract

Copper iodide (CuI) is a wide band gap semiconductor of I-VII group with excellent hole-transporting properties that has great potential uses in photoelectronic field. We present the preparation and optoelectronic properties of CuI films by pulling and chemical vapor deposition (CVD) methods. The former was deposited on ITO conductive glass substrate with the continuous pulling method, while the latter was grown on Si and quartz wafers by CVD deposition. The influences of deposition conditions on the structure, morphology and optoelectronic properties of CuI films have been studied using the measurement of X-ray diffraction (XRD), UV spectrophotometer and Hall Effect instrument. We found that the CuI films prepared by pulling 20 times or deposition 20 min have smooth surface morphology and good optoelectronic properties. Moreover, The CuI films prepared by CVD have better crystallinity, good current-voltage (I-V) property and stronger absorption in Ultraviolet band of light than that of CuI films by pulling method. Both CuI films have high absorptivity in ultraviolet band and high transmission in visible light range that show CuI film is more suitable as a window layer for solar cells to enhance the efficiency of solar cells.

Keywords

CuI Pulling method Chemical vapor deposition Morphology I-V property 

Notes

Acknowledgements

This work is supported in parts by the National Natural Science Foundation of China (No. 31570515), the Scientific Project Program of Suzhou City (No. SYN201511) and the USTS Cooperative Innovation Center for Functional Oxide Films and Optical Information.

References

  1. 1.
    S. Murugesan, Structural and electrical properties of CuI–Ag2O–MoO3–WO3 glassy-crystalline composite solid electrolyte system. J. Non-Cryst. Solids 396–397, 8–12 (2014)CrossRefGoogle Scholar
  2. 2.
    L. Liu, H. Zhang, J. Li, Y. Shen, C. Wang, L. Qiu, Y. Yuan, A. Xie, Porous Fe3O4/CuI/PANI nanosheets with excellent microwave absorption and hydrophobic property. Mater. Res. Bull. 53, 58–64 (2014)CrossRefGoogle Scholar
  3. 3.
    Y. Xu, D. Chen, X. Jiao, PAM-assisted synthesis of single-crystalline CuI nanorods. Mater. Lett. 63, 1859–1861 (2009)CrossRefGoogle Scholar
  4. 4.
    P.M. Sirimannea, T. Sogab, M. Kunst, Observation of microwave conductivity in copper iodide films and relay effect in the dye molecules attached to CuI photocathode. J. Solid State Chem. 178, 3010–3013 (2005)CrossRefGoogle Scholar
  5. 5.
    P. Gao, M. Gu, X. Liu, B. Liu, S. Huang, X-ray excited luminescence of cuprous iodide single crystals: on the nature of red luminescence. Appl. Phys. Lett. 95 221904(1–3) (2009)CrossRefGoogle Scholar
  6. 6.
    Y. Zhou, T. Taima, T. Miyadera, T. Yamanari, M. Kitamura, K. Nakatsu, Y. Yoshida, Glancing angle deposition of copper iodide nanocrystals for efficient organic photovoltaics. Nano Lett. 12, 4146–4152 (2012)CrossRefGoogle Scholar
  7. 7.
    W. Sun, H. Peng, Y. Li, W. Yan, Z. Liu, Z. Bian, C. Huang, Solution-processed copper iodide as an inexpensive and effective anode buffer layer for polymer solar cells. J. Phys. Chem. C 118, 16806–16812 (2014)CrossRefGoogle Scholar
  8. 8.
    I. Konovalov, L. Makhova, Valence band offset at interfaces between CuI and indium sulfides. J. Appl Phys. 103 103702(1–7) (2008)Google Scholar
  9. 9.
    S. Das, J. Choi, T.L. Alford, P3HT: PC61BM based solar cells employing solution processed copper iodide as the hole transport layer. Sol. Energy Mater. Sol. Cells 133, 255–259 (2014)CrossRefGoogle Scholar
  10. 10.
    J.A. Christians, R.C.M. Fung, P.V. Kamat, An inorganic hole conductor for organo-lead halide perovskite solar cells. Improved hole conductivity with copper iodide. J. Am. Chem. Soc. 136, 758–764 (2013)CrossRefGoogle Scholar
  11. 11.
    W. Sun, H. Peng, Y. Li, W. Yan, Z. Liu, Z. Bian, C. Huang, Solution-processed copper iodide as an inexpensive and effective anode buffer layer for polymer solar cells. J. Phys. Chem. C 118, 16806–16812 (2014)CrossRefGoogle Scholar
  12. 12.
    H. Iimori, S. Yamane, T. Kitamura, K. Murakoshi, A. Imanishi, Y. Nakato, High photovoltage generation at minority-carrier controlled n-Si/p-CuI heterojunction with morphologically soft CuI. J. Phys. Chem. C 112, 11586–11590 (2008)CrossRefGoogle Scholar
  13. 13.
    S. Inudo, M. Miyake, T. Hirato, Electrical properties of CuI films prepared by spin coating. Phys. Status Solidi Appl. Mater. 210, 2395–2398 (2013)CrossRefGoogle Scholar
  14. 14.
    Y. Yan, Y. Liu, L. Fang, Z. Lu, Z. Li, S. Zhou, Growth of CuI buffer layer prepared by spraying method. Trans. Nonferrous Met. Soc. China 21, 359–363 (2011)CrossRefGoogle Scholar

Copyright information

© Springer Nature Singapore Pte Ltd. 2018

Authors and Affiliations

  1. 1.Suzhou University of Science and TechnologySuzhouChina

Personalised recommendations