Coupling Effect of Transient Temperature-Pressure on Casing String During Volume Fracturing in Shale Gas Wells

Conference paper
Part of the Lecture Notes in Mechanical Engineering book series (LNME)

Abstract

Casing deformation has been found to be a very significant issue in the development process of shale gas in China, while the coupling effect of transient temperature-pressure has a significant impact on casing stress, and worthy of study. This paper presented a new numerical investigation to understand the coupling effect of transient temperature-pressure on casing string during volume fracturing. A wellbore temperature model was established to obtain the required input parameters of dynamic temperature boundary. The numerical model considers the coupling effect of transient temperature-pressure and the various cement sheath shapes. The results showed that the temperature of casing changed drastically during fracturing. Under the influence of the coupling effect of transient temperature-pressure, (a) when the cement sheath shape was integrity, the casing stress increased greatly and showed dynamic changes: first increased and then decreased, (b) when there was deficiency in cement sheath, with the increase of the eccentric distance or deficiency angle, the casing stress increased aggravating risk of casing deformation. Rotating the casing string during the cementing process to avoid the deficiency in cement sheath or using warm fracturing fluids to minimize the influence of the coupling effect of transient temperature-pressure are possible innovative strategies to solve these difficult problems.

Keywords

Volume fracturing Shale gas Wellbore temperature field model Coupled thermal-mechanical effect Semi-analytical method 

Notes

Acknowledgements

The authors thank the National Natural Science Foundation “Study on optimization of un-uniform clustering perforation for long horizontal inhomogeneous shale formation” (Item No. 51674272), National Science and Technology Major Project “Optimizing technology of cluster perforation completion design in complicated structure wells” (Item No. 2017ZX05009), the Science Foundation of China University of Petroleum (Beijing) “Research on optimization method of cluster perforation parameters in anisotropy shale gas reservoirs” (Item No. 2462015QZDX05), and the State Key Laboratory of Shale Oil and Gas Enrichment Mechanisms and Effective Development “Research on casing loading spectrum under multi-factor coupling effect in shale gas wells”, for contributions to this paper.

References

  1. 1.
    D. Zhou, P. Zhang, P. He, Peng Jiao, Hydraulic fracture propagation direction during volume fracturing in unconventional reservoirs. J. Petrol. Sci. Eng. 141, 82–89 (2016)CrossRefGoogle Scholar
  2. 2.
    A. Kreuzea, C. Schellya, E. Norman, To frack or not to frack: Perceptions of the risks and opportunities of high-volume hydraulic fracturing in the United States. Energy Res. Soc. Sci. 20, 45–54 (2016)CrossRefGoogle Scholar
  3. 3.
    A.A. Daneshy, Impact of off-balance fracturing on borehole stability & casing failure, in Presented at the 2005 SPE Western Regional Meeting held in Irvine, CA., U.S.A., 30 Mar–1 Apr (2005)Google Scholar
  4. 4.
    G.S. Kaldal, M.T. Jonsson, H. Palsson, S.N. Karlsdottir, Structural modeling of the casings in high temperature geothermal wells. Geothermics 55, 126–137 (2015)CrossRefGoogle Scholar
  5. 5.
    W. Wang, H. Zhang, P. Liu, Z. Li, W. Ni, H. Uechi, T. Matsumura, A finite element method approach to the temperature distribution in the inner casing of a steam turbine in a combined cycle power plant. Appl. Therm. Eng. 105, 18–27 (2016)CrossRefGoogle Scholar
  6. 6.
    Z. Bo, Z. Guan, A.R. Hasan, N. Lu, Q. Wang, Y. Xu, Z. Qi, Y. Liu, Development and design of new casing to mitigate trapped annular pressure caused by thermal expansion in oil and gas wells. Appl. Thermal Eng. 118, 292–298 (2017)Google Scholar
  7. 7.
    J.A. Wheeler, Analytical calculations of heat transfer from fractures, in Presented at the Improved Oil Recovery Symposium held in Tulsa, Apr 12–13 (1962)Google Scholar
  8. 8.
    M.A. Biot, L. Masse, W.L. Medlin, Temperature analysis in hydraulic fracturing. J. Petrol. Technol. 27, 1389–1397 (1987)CrossRefGoogle Scholar
  9. 9.
    C.E. Cohen, X. Weng, O. Kresse, Influence of fracturing fluid and reservoir temperature on production complex hydraulic fracture network in shale gas reservoir, in Presented at the SPE Unconventional Resources Conference and Exhibition-Asia Pacific held in Brisbane, Australia, Nov 11–13 (2013)Google Scholar
  10. 10.
    W. Yan, L. Zou, H. Li, J. Deng, H. Ge, H. Wang, Investigation of casing deformation during hydraulic fracturing in high geo-stress shale gas play. J. Petrol. Sci. Eng. 150, 22–29 (2017)CrossRefGoogle Scholar
  11. 11.
    Y. Hu, Y. Zhang, A quantitative evaluation method for the effect of temperature on casing collapsing strength: a case study of lagge scale hydraulic fracturing in shale gas horizonal wells. J. Nat. Gas Sci. Eng. 36, 73–77 (2016)Google Scholar
  12. 12.
    Y. Xi, J. Li, G. Liu, Y. Fu, Y. Li, Sensitivity study of shale reservoir anisotropy on casing stress. Spec. Oil Gas Reservoir 23, 128–132 (2016)Google Scholar
  13. 13.
    K. Jiang, Q. Lian, Y. Chen, G.X. Fu, Y. Li Jun, Influence of cementing quality on casing failures in horizontal shale gas wells. J. Nat. Gas Sci. Eng. 35, 77–82 (2015)Google Scholar
  14. 14.
    W. Dong, R. Shen, Q. Liang, H. Zhang, D. Yu, Calculation and analysis of casing thermal stress during stimulated reservoir volume fracturing. Fault Block Oil Gas Field 23, 673–675 (2016)Google Scholar
  15. 15.
    Z. Tian, L. Shi, L. Qiao, Research of and countermeasure for wellbore integrity of shale gas horizontal well. Nat. Gas. Ind. 35, 70–77 (2015)Google Scholar
  16. 16.
    C. Sugden, J. Johnson, M. Chambers, G. Ring, P.V. Suryanarayana, Special considerations in the design optimization of high rate, multistage fractured shale wells, in IADC/SPE Presented at the 2012 IADC/SPE Drilling Conference and Exhibition, San Diego, California, USA, March 6–8 (2012)Google Scholar

Copyright information

© Springer Nature Singapore Pte Ltd. 2018

Authors and Affiliations

  • Yan Xi
    • 1
  • Jun Li
    • 1
  • Yang Yu
    • 1
  • Zongyuan Li
    • 1
  • Bowen Mei
    • 2
  1. 1.China University of Petroleum-BeijingBeijingChina
  2. 2.China Petroleum Materials CorporationBeijingChina

Personalised recommendations