In order to figure out the void evolution law and its control technology during forging, systematic study was carried out by both numerical simulation method and industrial test. Firstly, void evolution during forging along the height direction and the width direction of the ingot was simulated by deform-3D which is a widely used numerical simulation software. Subsequently, the void closure law by single direction forging and double direction forging was analysed comparatively, the results showed that the single direction forging was more beneficial to close the void. Based on the above study, the new forging technology to control void defect was proposed and industrial experiment was carried out. The results showed that the void defect in the forging produced by the new technology was lighter than that by the original.
Void evolution Common defect Steel ingot Forging Void closure
This is a preview of subscription content, log in to check access.
A. Milenin, W. Walczyk, M. Pietrzyk, Numerical modeling of microstructure evolution during forging of crank shafts. Steel Res. Int. 83(8), 808–816 (2012)CrossRefGoogle Scholar
F. Chen, Z. Cui, Mesoscale simulation of microstructure evolution during multi-stage hot forging processes. Modell. Simul. Mater. Sci. Eng. 20(4), 359–371 (2012)Google Scholar
R. Ebara, Fatigue crack initiation and propagation behavior of forging die steels. Int. J. Fatigue 32(5), 830–840 (2010)CrossRefGoogle Scholar
Y.S. Na, J.T. Yeom, N.K. Park et al., Prediction of microstructure evolution during high temperature blade forging of a Ni−Fe based superalloy, Alloy 718. Met. Mater. Int. 9(1), 15–19 (2003)CrossRefGoogle Scholar
H.W. Lee, S.H. Kang, Y. Lee, Prediction of microstructure evolution during hot forging using grain aggregate model for dynamic recrystallization. Int. J. Precis. Eng. Manuf. 15(6), 1055–1062 (2014)CrossRefGoogle Scholar
J. Xu, W. Zeng, X. Sun et al., Microstructure evolution during isothermal forging and subsequent heat treatment of Ti-17 alloy with a lamellar colony structure. J. Alloy. Compd. 637, 449–455 (2015)CrossRefGoogle Scholar
M. Mukherjee, U. Prahl, W. Bleck, Modelling of microstructure and flow stress evolution during hot forging. Steel Res. Int. 81(12), 1102–1116 (2010)CrossRefGoogle Scholar
Zhu Q, Li L, Zhang Z, Microstructure evolution of AZ80 magnesium alloy during multi-directional forging process. Mater. Trans., 270–274 (2014)CrossRefGoogle Scholar
G.X. Qi, R.B. Mei, F. Wang et al., A numerical simulation of microstructure evolution of GH4169 alloy blade during finish forging. Adv. Mater. Res. 704–705, 113–118 (2011)Google Scholar
W.W. He, J.S. Liu, H.Q. Chen et al., Simulation and analysis on microstructure evolution of large generator retaining ring during multi-fire forging. Adv. Mater. Res. 97–101, 176–181 (2010)CrossRefGoogle Scholar
Kipelova A, Odnobokova M, Belyakov A et al. Microstructure evolution in a 304-type austenitic stainless steel during multidirectional forging at ambient temperature. Mater. Sci. Forum., 831–836 (2014)Google Scholar