Properties of Carbon Nanotubes (CNTs) Reinforced Copper Matrix Composites by Ultrasonic Welding

  • Zhengqiang Zhu
  • Mingfeng Li
  • Qiankun Xiao
  • Yifu Zhang
Conference paper
Part of the Lecture Notes in Mechanical Engineering book series (LNME)

Abstract

In this research, multi-walled CNTs’ surface was firstly coated with a good binding copper layer successfully by electroless plating method, to solve the multi-walled CNTs clusters wrapped problem effectively. Then copper matrix composites reinforced with the electroless copper plated multi-walled CNTs were prepared successfully by ultrasonic metal welding process. The Effects of copper surface state and CNTs content on the mechanical properties and microstructure characterization of the prepared composites were analyzed. And multi-walled CNTs reinforced mechanism was discussed.

Keywords

Multi-walled CNTs Ultrasonic metal welding Electroless copper plating Copper matrix composites 

Notes

Acknowledgements

This project is supported by the National Natural Science Foundation of China (Grant No. 51365039).

References

  1. 1.
    R. Bacon, Growth, structure, and properties of graphite whiskers. J. Appl. Phys. 2, 283–290 (1960)CrossRefGoogle Scholar
  2. 2.
    M. Treacy, T.W. Ebbesen, J.M. Gibson, Exceptionally high young’s modulus observed for individual carbon nanotubes. Nature 381, 678–680 (1996)CrossRefGoogle Scholar
  3. 3.
    E.W. Wong, P.E. Sheehan, C.M. Lieber, Nanobeam mechanics: elasticity, strength, and toughness of nanorods and nanotubes. Science 277, 1971–1975 (1997)CrossRefGoogle Scholar
  4. 4.
    M.F. Yu, O. Lourie, M.J. Dyer, K. Moloni, T.F. Kelly, R.S. Ruoff, Strength and breaking mechanism of multiwalled carbon nanotubes under tensile load. Science 287, 637–640 (2000)CrossRefGoogle Scholar
  5. 5.
    P.M. Ajayan, J.M. Tour, Materials science—nanotube composites. Nature 447, 1066–1068 (2007)CrossRefGoogle Scholar
  6. 6.
    Y. Matsuda, W. Deng, W.A.I. Goddard, Improving contact resistance at the nanotube-Cu electrode interface using molecular anchors. J. Phys. Chem. C 112, 11042–11049 (2008)CrossRefGoogle Scholar
  7. 7.
    S.R. Bakshi, D. Lahiri, A. Agarwal, Carbon nanotube reinforced metal matrix composites—a review. Int. Mater. Rev. 55, 41–64 (2010)CrossRefGoogle Scholar
  8. 8.
    S.M. Uddin, T. Mahmud, C. Wolf, C. Glanz, I. Kolaric, C. Volkmer, H. Hoeller, U. Wienecke, S. Roth, H. Fecht, Effect of size and shape of metal particles to improve hardness and electrical properties of carbon nanotube reinforced copper and copper alloy composites. Compos. Sci. Technol. 70, 2253–2257 (2010)CrossRefGoogle Scholar
  9. 9.
    S.J. Tans, A. Verschueren, C. Dekker, Room-temperature transistor based on a single carbon nanotube. Nature 393, 49–52 (1998)CrossRefGoogle Scholar
  10. 10.
    E. Dujardin, T.W. Ebbesen, H. Hiura, K. Tanigaki, Capillarity and wetting of carbon nanotubes. Science 265, 1850–1852 (1994)CrossRefGoogle Scholar
  11. 11.
    S. Hippmann, Q. Li, R. Addinal, W. Volk, Carbon nanotubes-reinforced copper matrix composites produced by melt stirring. Proc. Inst. Mech. Eng., Part N: J. Nanoeng. Nanosyst. 227, 63–66 (2013)Google Scholar
  12. 12.
    S. Cho, K. Kikuchi, T. Miyazaki, K. Takagi, A. Kawasaki, T. Tsukada, Multiwalled carbon nanotubes as a contributing reinforcement phase for the improvement of thermal conductivity in copper matrix composites. Scr. Mater. 63, 375–378 (2010)CrossRefGoogle Scholar
  13. 13.
    S. Cho, K. Takagi, H. Kwon, D. Seo, K. Ogawa, K. Kikuchi, A. Kawasaki, Multi-walled carbon nanotube-reinforced copper nanocomposite coating fabricated by low-pressure cold spray process. Surf. Coat. Technol. 206, 3488–3494 (2012)CrossRefGoogle Scholar
  14. 14.
    K. Rajkumar, S. Aravindan, Tribological studies on microwave sintered copper-carbon nanotube composites. Wear 270, 613–621 (2011)CrossRefGoogle Scholar
  15. 15.
    L.M. Ang, T. Hor, G.Q. Xu, C.H. Tung, S.P. Zhao, J. Wang, Decoration of activated carbon nanotubes with copper and nickel. Carbon 38, 363–372 (2000)CrossRefGoogle Scholar

Copyright information

© Springer Nature Singapore Pte Ltd. 2018

Authors and Affiliations

  • Zhengqiang Zhu
    • 1
  • Mingfeng Li
    • 1
  • Qiankun Xiao
    • 1
  • Yifu Zhang
    • 2
  1. 1.School of Mechanical and Electrical EngineeringNanchang UniversityNanchangChina
  2. 2.School of Mechanical and Electrical EngineeringJiujiang UniversityJiujiangChina

Personalised recommendations