Induction Machine Modelling

Chapter
Part of the SpringerBriefs in Electrical and Computer Engineering book series (BRIEFSELECTRIC)

Abstract

The chapter deals with the modelling of the induction machine (IM). Following the analysis of the principle of operation which is based on the induction phenomenon, the a-b-c model is established assuming a sinusoidal spatial repartition of the air gap flux density, a linear magnetic circuit, and constant phase resistors. The a-b-c model makes possible the establishment of a state representation of the IM. Then, the Park transform is introduced and applied to the IM a-b-c model, leading to its Park one. An analysis of the IM steady-state operation is then carried out using its Park model. The chapter is achieved by a case study dealing with the doubly fed induction machine which is widely integrated in wind power generating systems.

Keywords

Induction machine Modelling A-B-C model State representation Park Model 

References

  1. 1.
    J. Lesenne, F. Notelet, G. Seguier, Introduction to the Deep Electrotechnic (in French) (Technique et Documentation, Paris, France, 1980)Google Scholar
  2. 2.
    A. Masmoudi, Contribution to the voltage control of doubly-fed machines (in French). Ph.D. Dissertation, Pierre and Marie Curie (Paris 6) University, France, Paris (1994)Google Scholar
  3. 3.
    P. Barret, M. Magnien, Transient Regimes of Rotating Electrical Machines (in French) (Editions Eyrolles, Paris, France, 1982)Google Scholar
  4. 4.
    J. Chatelain, Electrical Machines (Edition Georgi, Lausanne, Suitzerland, 1983)Google Scholar
  5. 5.
    F. Jallali, A. Masmoudi, Modeling and analysis of BCDFM: effect of rotor-phase sequence connection. Int. J. Comput. Math. Electr. Electron. Eng. 31(1), 261–278 (2012)CrossRefGoogle Scholar

Copyright information

© The Author(s) 2018

Authors and Affiliations

  1. 1.Sfax Engineering National SchoolUniversity of SfaxSfaxTunisia

Personalised recommendations