Calculation of Airgap Function and Inductance in Fractional-Slot Concentrated-Wound Interior Permanent Magnet Machines

Chapter
Part of the Springer Theses book series (Springer Theses)

Abstract

This chapter deals with analytical modelling of the equivalent airgap function in a FSCW IPM machine which is later used for calculation of the inductances and the stator flux density in the airgap. The conventional equivalent airgap function is first introduced. A novel equivalent airgap function is then proposed that is based on the specific characteristics of an FSCW stator and the analytical model of the non-homogeneous magnetic saturation of the rotor iron that was previously proposed in Chapter 4. The inductances of the machine and the stator flux density in the airgap are then analytically calculated using the proposed equivalent airgap function and the MMF obtained in Chapter 2. The results are validated through a case-study using FEA and experimental measurements of the prototype FSCW IPM machine.

References

  1. 1.
    P.B. Reddy, A.M. El-Refaie, K.K. Huh, J.K. Tangudu, T.M. Jahns, Comparison of interior and surface PM machines equipped with fractional-slot concentrated windings for hybrid traction applications. IEEE Trans. Energy Convers. 27, 593–602 (2012)CrossRefGoogle Scholar
  2. 2.
    R. Dutta, M.F. Rahman, L. Chong, Winding inductances of an interior permanent magnet (IPM) machine with fractional slot concentrated winding. IEEE Trans. Magn. 48, 4842–4849 (2012)CrossRefGoogle Scholar
  3. 3.
    J. Pyrhonen, T. Jokinen, V. Hrabovcová, Design of Rotating Electrical Machines (Wiley, 2009)Google Scholar
  4. 4.
    P.C. Krause, O. Wasynczuk, S.D. Sudhoff, S. Pekarek, Analysis of Electric Machinery and Drive Systems, vol. 75 (Wiley, 2013)Google Scholar
  5. 5.
    A.M. El-Refaie, Z.Q. Zhu, T.M. Jahns, D. Howe, Winding inductances of fractional slot surface-mounted permanent magnet brushless machines, in Industry Applications Society Annual Meeting, 2008, IAS ‘08 (IEEE, 2008), pp. 1–8Google Scholar
  6. 6.
    J. Staszak, Determination of slot leakage inductance for three-phase induction motor winding using an analytical method. Arch. Electr. Eng. 62, 569–591 (2013)Google Scholar
  7. 7.
    B. Prieto, M. Martinez-Iturralde, L. Fontan, I. Elosegui, Analytical calculation of the slot leakage inductance in fractional-slot concentrated-winding machines. IEEE Trans. Ind. Electron. 2742–2752 (2015)Google Scholar
  8. 8.
    B.N. Cassimere, S.D. Sudhoff, D.H. Sudhoff, Analytical design model for surface-mounted permanent-magnet synchronous machines. IEEE Trans. Energy Convers. 24, 347–357 (2009)CrossRefGoogle Scholar
  9. 9.
    G. Dajaku, D. Gerling, Stator slotting effect on the magnetic field distribution of salient pole synchronous permanent-magnet machines. IEEE Trans. Magn. 46, 3676–3683 (2010)CrossRefGoogle Scholar
  10. 10.
    X. Hung Vu, D. Lahaye, H. Polinder, J.A. Ferreira, Influence of stator slotting on the performance of permanent-magnet machines with concentrated windings. IEEE Trans. Magn. 49, 929–938 (2013)CrossRefGoogle Scholar
  11. 11.
    L. Qi, F. Tao, W. Xuhui, Armature-reaction magnetic field analysis for interior permanent magnet motor based on winding function theory. IEEE Trans. Magn. 49, 1193–1201 (2013)CrossRefGoogle Scholar
  12. 12.
    L. Chong, R. Dutta, M.F. Rahman, Design of a highly efficient 1 kW concentric wound IPM machine with a very wide constant power speed range, in Proceedings of the IPEC (2010), pp. 1956–1961Google Scholar
  13. 13.
    IEEE standard procedure for obtaining synchronous machine parameters by standstill frequency response testing, in IEEE Standard 115A-1987, ed.Google Scholar

Copyright information

© Springer Nature Singapore Pte Ltd. 2018

Authors and Affiliations

  1. 1.School of Electrical Engineering and TelecommunicationsThe University of New South WalesSydneyAustralia

Personalised recommendations