Simulation Model of Direct Power Supply System with Return Wire in Tunnel Section
Traction power system simulation is needed, not only before system construction or reformation, but also the sensitivity analysis for the parameters of existing line. Due to the special landscapes for tunnel section, parameter calculation method of wires in traction power supply system should be different from the other kinds of section. Take Wushaoling super long tunnel section as example, the simulation model of direct power supply system with return wire was built based on the multiconductor transmission line (MTL) theory. The characteristic impedance was used to dispose the end effect of the return current network, the impedance parameters of traction network were calculated through Tylavsky formulas. At last, Field tests were performed to validate the correctness of the simulation model, this modeling method could be promoted to the simulation of other tunnel sections.
KeywordsElectrified railway Power supply system Tunnel section Simulation model
This work was supported by “the Fundamental Research Funds for the Central Universities (NO. 2017JC14)”.
- 1.Yang G, Liu MG, Li N (2010) Research on model of rail potential distribution and its simulation. J Beijing Jiaotong Univ 34(2):137–141 (in Chinese)Google Scholar
- 4.Bodnar I, Varju G (2013) Effect of the intervals between the bonds of overhead line and reinforcing feeder wire in the case of 25 kV traction feeding at 50 Hz. In: International youth conference on energy. IEEE, pp 1–6Google Scholar
- 5.Mi Z, Li Q, Ma Q et al (2013) Sensitivity analysis of rail potential for AT-fed traction power system. Electr Eng 14(9):24–28 (in Chinese)Google Scholar
- 6.Yang B (2009) Comprehensive simulation of AT traction power supply and integrated grounding system. MSc, Beijing Jiaotong University, Beijing, China (in Chinese)Google Scholar
- 7.Wu ML, Yu F, Xin CS (2006) Impedance of conductor-earth circuits in electric railway tunnel. Proc CSEE 26(5):176–181 (in Chinese)Google Scholar
- 8.Deng ML (2009) The study on the rail traction return current and rail potential rule of high-speed heavy railway. MSc, Southwest Jiaotong University, Chengdu, China (in Chinese)Google Scholar
- 9.Ma QA, Liu W, Xu YL et al (2013) Determination of characteristic impedance matrix of earth return circuit for autotransformer-fed traction power network. Power Syst Technol 37(6):1764–1768 (in Chinese)Google Scholar