Advertisement

The Study on the Photopolymerization Reaction of UV-LED Inkjet Ink

  • Beiqing Huang
  • Yiran Li
  • Wan Zhang
  • Xianfu Wei
Conference paper
Part of the Lecture Notes in Electrical Engineering book series (LNEE, volume 477)

Abstract

The study on the photopolymerization reaction of UV-LED inkjet ink is very significant in order to improve the curing speed. The effects of the type and content of photoinitiator, the content of pigment and the intensity of light source on the curing speed of yellow UV-LED inkjet ink were studied by the combinative test method between touch method and real-time infrared spectroscopy. Meanwhile, the optimal proportion of photoinitiator was determined by formula experiment, and then, the content of pigment was obtained by combining the color density of ink. The results showed the absorptivity of photoinitiator to the light source of UV-LED and the quantum yield of active species impact seriously the curing speed of ink. The effect of the content of photoinitiator on the reaction speed of photopolymerization exhibited the tendency is fast increase firstly, and then, stabilization, slight decrease finally. The reaction speed of photopolymerization improved with the increase of the intensity of light source. The curing speed of ink decreased with the increase of the content of pigment, and the optimal content was 2–3% under guaranteeing the appropriate color density. The curing speed of yellow UV-LED inkjet ink was the best of all by using photoinitiators ITX, 910 and 819 (the mass ratio is 38:34:29).

Keywords

UV-LED inkjet ink Photopolymerization reaction Curing speed 

Notes

Acknowledgements

This work is supported by BIGC Project (Grant no. 04190117001/008).

References

  1. 1.
    Gao J (compile) (2012) UV-LED curable. Printing Field (02)Google Scholar
  2. 2.
    Ji D (2010) The LED in the application and development trend of UV printing. Printing Field (5)Google Scholar
  3. 3.
    Gao X, Lie J (2006) Method of real-time infrared detection is uv polymerization kinetics of bisphenol a epoxy resin. Inf Rec Mater 05,7(5)Google Scholar
  4. 4.
    Wei Jie, Jin Yangzhi (2013) UV-curable coatings. Chemical Industry Press, BeijingGoogle Scholar
  5. 5.
    Jin Yangzhi (2010) Light curing material performance and application manual. Chemical Industry Press, BeijingGoogle Scholar
  6. 6.
    Yi Q, Huang B, Wei X (2013) The UV Printing ink light initiator—LED and light matching. J Beijing Inst Printing 12, 21(6)Google Scholar

Copyright information

© Springer Nature Singapore Pte Ltd. 2018

Authors and Affiliations

  • Beiqing Huang
    • 1
  • Yiran Li
    • 1
  • Wan Zhang
    • 1
  • Xianfu Wei
    • 1
  1. 1.School of Printing and Packaging EngineeringBeijing Institute of Graphic CommunicationBeijingChina

Personalised recommendations