Advertisement

Modeling City Patterns for Urban Ventilation: Strategies in High Density Areas of Singapore

  • Abel Tablada
  • Yueyang He
Chapter
Part of the Palgrave Series in Asia and Pacific Studies book series (PSAPS)

Abstract

Effective urban ventilation cools physical surfaces, reduces energy consumption and improves human thermal comfort under hot conditions, especially in tropical and subtropical regions. It is important for planners and architects to understand the influences of urban morphological features on wind environment and air movement.

In addition to a concise literature review regarding wind behaviour in tropical and subtropical high-density urban environments, this study uses Computational Fluid Dynamics (CFD) simulations to assess strategies of adjusting breezeway features based on Singapore’s climate. These strategies include: (1) reducing breezeway network densities; (2) varying breezeway widths; (3) varying breezeway spacing; (4) staggering the block; and (5) inserting T-shaped junctions by merging two plots. They were studied in two plot types, namely, separate blocks on top of the podium (type A) or ground (type B), which have the same building plot ratios and site areas.

By comparing strategies, in general, the second strategy—varying breezeway widths—achieves the best compromise between pedestrian and building ventilation potentials. On the contrary, the third and fourth strategies lead to poor ventilation. In addition, by comparing the plot types, type B (without podium) tends to achieve better wind environments in most of the strategies. Furthermore, with higher design flexibility, breezeway patterns inside land lots have stronger effects on urban ventilation than breezeway patterns outside land lots.

The results in terms of the influence of breezeway network patterns as a design parameter are significant for both planners and architects. For planners, they provide direct guidance for arranging streets and other city open spaces, which should be planned prior to building design. For architects, they offer an effective way to parameterise the building layouts especially those of extreme complexity. Whilst the study focuses on the macro level, both aspects of urban planning and design are important complements to other urban cooling strategies.

Keywords

Urban ventilation Breezeway network pattern High density CFD Passive cooling Singapore 

References

  1. Blocken, B., Stathopoulos, T., & van Beeck, J. P. A. J. (2016). Pedestrian-level wind conditions around buildings: Review of wind-tunnel and CFD techniques and their accuracy for wind comfort assessment. Building and Environment, 100, 50–81.CrossRefGoogle Scholar
  2. Buccolieri, R., Sandberg, M., & Di Sabatino, S. (2010). City breathability and its link to pollutant concentration distribution within urban-like geometries. Atmospheric Environment, 44(15), 1894–1903.CrossRefGoogle Scholar
  3. Building and Construction Authority. (2010). Green building planning and massing. Singapore: Building and Construction Authority.Google Scholar
  4. Building and Construction Authority. (2012). Certification standard for new buildings, BCA green mark (Version 4.1). Singapore: Building and Construction Authority. https://www.bca.gov.sg/GreenMark/others/GM_Certification_Std2012.pdf.Google Scholar
  5. Chatelet, A., Fernandez, P., & Lavigne, P. (1998). Architecture Climatique. Une contribution au développement durable 2. Aix-en-Provence: Edisud.Google Scholar
  6. Cheshmehzangi, A., Zhu, Y., Li, B. (2010). Integrated urban design approach: sustainability for urban design. Proceedings for ICRM 2010, 5th International Conference for Responsive Manufacturing in China. Ningbo.Google Scholar
  7. Franke, J., Hellsten, A., Schlünzen, H., & Carissimo, B. (2007). Best practice guideline for the CFD simulation of flows in the urban environment, COST 732. Quality assurance and improvement of microscale meteorological models. Brussels: COST Office.Google Scholar
  8. Georgakis, C., & Santamouris, M. (2005). Wind and temperature in the urban environment. In C. Ghiaus & F. Allard (Eds.), Natural ventilation in the urban environment: Assessment and design (pp. 81–102). London/Sterling: Earthscan.Google Scholar
  9. Givoni, B., Khedari, J., Wong, N. H., Feriadi, H., & Noguchi, M. (2006). Thermal sensation responses in hot, humid climates: Effects of humidity. Building Research and Information, 34(5), 496–506.CrossRefGoogle Scholar
  10. Hong Kong Planning Department. (2005). Feasibility study for establishment of air ventilation assessment system. Final report, Hong Kong.Google Scholar
  11. Kubota, T., Miura, M., Tominaga, Y., & Mochida, A. (2008). Wind tunnel tests on the relationship between building density and pedestrian-level wind velocity: Development of guidelines for realizing acceptable wind environment in residential neighborhoods. Building and Environment, 43(10), 1699–1708.CrossRefGoogle Scholar
  12. Launder, B. E., & Spalding, D. B. (1974). The numerical computation of turbulent flows. Computer Methods in Applied Mechanics and Engineering, 3(2), 269–289.Google Scholar
  13. Li, B., Liu, J., & Li, M. (2013). Wind tunnel study on the morphological parameterization of building non-uniformity. Journal of Wind Engineering and Industrial Aerodynamics, 121, 60–69.CrossRefGoogle Scholar
  14. Lin, M., Hang, J., Li, Y., Luo, Z., & Sandberg, M. (2014). Quantitative ventilation assessments of idealized urban canopy layers with various urban layouts and the same building packing density. Building and Environment, 79, 152–167.CrossRefGoogle Scholar
  15. National Environment Agency. Record of climate station mean, weather statistics 2016. http://www.nea.gov.sg/weather-climate/climate/weather-statistics
  16. Ng, E. (2010). Designing high-density cities: For social and environmental sustainability. London/Sterling: Earthscan.Google Scholar
  17. Ng, E. (2009). Policies and technical guidelines for urban planning of high-density cities – Air ventilation assessment (AVA) of Hong Kong. Building and Environment, 44(7), 1478–1488.CrossRefGoogle Scholar
  18. Oke, T. R. (2002). Boundary layer climates. Abingdon: Routledge.Google Scholar
  19. Rajagopalan, P., Lim, K. C., & Jamei, E. (2014). Urban heat island and wind flow characteristics of a tropical city. Solar Energy, 107, 159–170.CrossRefGoogle Scholar
  20. Ramponi, R., Blocken, B., Laura, B., & Janssen, W. D. (2015). CFD simulation of outdoor ventilation of generic urban configurations with different urban densities and equal and unequal street widths. Building and Environment, 92, 152–166.CrossRefGoogle Scholar
  21. Stocker, T. F., Qin, D., Plattner, G.-K., Tignor, M., Allen, S. K., Boschung, J., Nauels, A., et al. (2014). Climate change 2013: The physical science basis. Cambridge/New York: Cambridge University Press.Google Scholar
  22. Tominaga, Y., Mochida, A., Yoshie, R., Kataoka, H., Nozu, T., Yoshikawa, M., & Shirasawa, T. (2008). AIJ guidelines for practical applications of CFD to pedestrian wind environment around buildings. Journal of Wind Engineering and Industrial Aerodynamics, 96(10–11), 1749–1761.CrossRefGoogle Scholar
  23. Tsutsumi, J., Katayama, T., & Nishida, M. (1992). Wind tunnel tests of wind pressure on regularly aligned buildings. Journal of Wind Engineering and Industrial Aerodynamics, 43(1), 1799–1810.CrossRefGoogle Scholar
  24. United Nations, Department of Economic and Social Affairs, Population Division. (2017). World Population Prospects: The 2017 Revision, Key Findings and Advance Tables. New York: United Nations. https://esa.un.org/unpd/wpp/Publications/Files/WPP2017_KeyFindings.pdf
  25. Wong, N. H., & Chen, Y. (2005). Study of green areas and urban heat island in a tropical city. Habitat International, 29(3), 547–558.CrossRefGoogle Scholar
  26. Wong, N. H., & Chen, Y. (2008). Tropical urban heat islands: Climate, buildings and greenery. Abingdon: Taylor & Francis.Google Scholar
  27. Wong, M. S., Nichol, J. E., Pui Hang To, & Wang, J. (2010). A simple method for designation of urban ventilation corridors and its application to urban heat island analysis. Building and Environment, 45(8), 1880–1889.CrossRefGoogle Scholar
  28. Yang, W., Wong, N. H., & Jusuf, S. K. (2013). Thermal comfort in outdoor urban spaces in Singapore. Building and Environment, 59, 426–435.CrossRefGoogle Scholar
  29. Zaki, S. A., Hagishima, A., & Tanimoto, J. (2012). Experimental study of wind-induced ventilation in urban building of cube arrays with various layouts. Journal of Wind Engineering and Industrial Aerodynamics, 103, 31–40.CrossRefGoogle Scholar

Copyright information

© The Author(s) 2018

Authors and Affiliations

  • Abel Tablada
    • 1
  • Yueyang He
    • 1
  1. 1.Department of Architecture, School of Design and EnvironmentNational University of SingaporeSingaporeSingapore

Personalised recommendations