Advertisement

Physicomechanical Properties and Utilization of Hydrogels Prepared by Physical and Physicochemical Crosslinking

  • Adriana Kovalcik
Chapter
Part of the Gels Horizons: From Science to Smart Materials book series (GHFSSM)

Abstract

Research concerning physical hydrogels, their morphological characteristics, swelling ability, and related mechanical properties is of increasing significance over last fifteen years due to their controllable degradability and desirable biocompatibility. Additionally, it is very important that physical crosslinking methods such as freeze-thaw cycling, heat treatment, ionic interactions, hydrophobic interactions, hydrogen bonding interactions, self-assembly stereocomplexation as well as other non-covalent interactions do not require use of chemical crosslinking agents which may induce allergic or toxic side effects. Physical crosslinked hydrogels have found their applications so far in pharmaceutical and medical areas. The engineering applications of physical hydrogels are still limited due to low mechanical toughness and short-term stability. This review explores mainly used physical crosslinking methods with examples of polymers crosslinkable with physical junctions. Special focus is given to methods improving mechanical rigidity of physical hydrogels based on anionic polysaccharides and poly(vinyl alcohol).

Keywords

Hydrogels Physical crosslinking Mechanical properties Creep Anionic polysaccharides Poly(vinyl alcohol) 

References

  1. Abdel-Mohsen AM, Aly AS, Hrdina R, Montaser AS, Hebeish A (2011) Eco-synthesis of PVA/Chitosan hydrogels for biomedical application. J Polym Environ 19(4):1005–1012CrossRefGoogle Scholar
  2. Ahearne M, Yang Y, El Haj AJ, Then KY, Liu K-K (2005) Characterizing the viscoelastic properties of thin hydrogel-based constructs for tissue engineering applications. J R Soc Interface 2(5):455–463PubMedPubMedCentralCrossRefGoogle Scholar
  3. Alexandridis P, Holzwarth JF, Hatton TA (1994) Micellization of poly(ethylene oxide)-poly(propylene oxide)-poly(ethylene oxide) triblock copolymers in aqueous solutions: thermodynamics of copolymer association. Macromolecules 27(9):2414–2425CrossRefGoogle Scholar
  4. Bagri LP, Bajpai J, Bajpai AK (2009) Cryogenic designing of biocompatible blends of polyvinyl alcohol and starch with macroporous architecture. J Macromol Sci Part A: Pure Appl Chem 46(11):1060–1068CrossRefGoogle Scholar
  5. Bajpai AK, Saini R (2006) Preparation and characterization of novel biocompatible cryogels of poly(vinyl alcohol) and egg-albumin and their water sorption study. J Mater Sci: Mater Med 17(1):49–61Google Scholar
  6. Bani-Jaber A, Kobayashi A, Yamada K, Haj-Ali D, Uchimoto T, Iwao Y, Noguchi S, Itai S (2015) A newly developed lubricant, chitosan laurate, in the manufacture of acetaminophen tablets. Int J Pharm (Amsterdam Neth) 483(1–2):49–56Google Scholar
  7. Bouklas N, Landis CM, Huang R (2015) A nonlinear, transient finite element method for coupled solvent diffusion and large deformation of hydrogels. J Mech Phys Solids 79:21–43CrossRefGoogle Scholar
  8. Canillas M, de Lima GG, Rodriguez MA, Nugent MJD, Devine DM (2016) Bioactive composites fabricated by freezing-thawing method for bone regeneration applications. J Polym Sci Part B: Polym Phys 54(7):761–773CrossRefGoogle Scholar
  9. Cappello J, Crissman JW, Crissman M, Ferrari FA, Textor G, Wallis O, Whitledge JR, Zhou X, Burman D, Aukerman L, Stedronsky ER (1998) In-situ self-assembling protein polymer gel systems for administration, delivery, and release of drugs. J Control Release 53(1–3):105–117PubMedCrossRefGoogle Scholar
  10. Cerchiara T, Luppi B, Bigucci F, Orienti I, Zecchi V (2002) Physically cross-linked chitosan hydrogels as topical vehicles for hydrophilic drugs. J Pharm Pharmacol 54(11):1453–1459PubMedCrossRefGoogle Scholar
  11. Chen N-X, Zhang J-H (2010) The role of hydrogen-bonding interaction in poly(vinyl alcohol)/poly(acrylic acid) blending solutions and their films. Chin J Polym Sci 28(6):903–911CrossRefGoogle Scholar
  12. Chenite A, Chaput C, Wang D, Combes C, Buschmann MD, Hoemann CD, Leroux JC, Atkinson BL, Binette F, Selmani A (2000) Novel injectable neutral solutions of chitosan form biodegradable gels in situ. Biomaterials 21(21):2155–2161PubMedCrossRefGoogle Scholar
  13. Choi J, Bodugoz-Senturk H, Kung HJ, Malhi AS, Muratoglu OK (2006) Effects of solvent dehydration on creep resistance of poly(vinyl alcohol) hydrogel. Biomaterials 28(5):772–780PubMedCrossRefGoogle Scholar
  14. Chun HJ, Lee SB, Nam SY, Ryu SH, Jung SY, Shin SH, Cheong SI, Rhim JW (2005) Preparation and swelling behavior of thermally cross-linked poly(vinyl alcohol) and poly(acrylic acid) hydrogel. J Ind Eng Chem (Seoul Repub Korea) 11(4):556–560Google Scholar
  15. de Jong SJ, De Smedt SC, Wahls MWC, Demeester J, Kettenes-van den Bosch JJ, Hennink WE (2000) Novel self-assembled hydrogels by stereocomplex formation in aqueous solution of enantiomeric lactic acid oligomers grafted to dextran. Macromolecules 33(10):3680–3686CrossRefGoogle Scholar
  16. De SK, Aluru NR, Johnson B, Crone WC, Beebe DJ, Moore J (2002) Equilibrium swelling and kinetics of pH-responsive hydrogels: models, experiments, and simulations. J Microelectromech Syst 11(5):544–555CrossRefGoogle Scholar
  17. Drexler PG, Tesoro G (1984) Materials and processes for textile warp sizing. CRC PressGoogle Scholar
  18. Ebara M, Kotsuchibashi Y, Uto K, Aoyagi T, Kim Y-J, Narain R, Idota N, Hoffman JM (2014) Smart biomaterials. Springer, p 9Google Scholar
  19. El Salmawi KM (2007) Application of polyvinyl alcohol (PVA)/carboxymethyl cellulose (CMC) hydrogel produced by conventional crosslinking or by freezing and thawing. J Macromol Sci Part A Pure Appl Chem 44(6):619–624CrossRefGoogle Scholar
  20. Funami T, Hiroe M, Noda S, Asai I, Ikeda S, Nishinari K (2007) Influence of molecular structure imaged with atomic force microscopy on the rheological behavior of carrageenan aqueous systems in the presence or absence of cations. Food Hydrocoll 21(4):617–629CrossRefGoogle Scholar
  21. Fundueanu G, Nastruzzi C, Carpov A, Desbrieres J, Rinaudo M (1999) Physico-chemical characterization of Ca-alginate microparticles produced with different methods. Biomaterials 20(15):1427–1435PubMedCrossRefGoogle Scholar
  22. Ginzburg VV, Sammler RL, Huang W, Larson RG (2016) Anisotropic self-assembly and gelation in aqueous methylcellulose-theory and modeling. J Polym Sci Part B: Polym Phys (Ahead of Print)Google Scholar
  23. Goetten de Lima G, Campos L, Junqueira A, Devine DM, Nugent MJD (2015) A novel pH-sensitive ceramic-hydrogel for biomedical applications. Polym Adv Technol 26(12):1439–1446CrossRefGoogle Scholar
  24. Gregorova A, Lahti J, Schennach R, Stelze F (2013) Humidity response of Kraft papers determined by dynamic mechanical analysis. Thermochim Acta 570:33–40CrossRefGoogle Scholar
  25. Gregorova A, Saha N, Kitano T, Saha P (2015) Hydrothermal effect and mechanical stress properties of carboxymethylcellulose based hydrogel food packaging. Carbohydr Polym 117:559–568PubMedCrossRefGoogle Scholar
  26. Grundelova L, Gregorova A, Mracek A, Vicha R, Smolka P, Minarik A (2015) Viscoelastic and mechanical properties of hyaluronan films and hydrogels modified by carbodiimide. Carbohydr Polym 119:142–148PubMedCrossRefGoogle Scholar
  27. Guan Y, Zhang B, Bian J, Peng F, Sun R-C (2014) Nanoreinforced hemicellulose-based hydrogels prepared by freeze-thaw treatment. Cellulose (Dordrecht Neth) 21(3):1709–1721Google Scholar
  28. Gudeman LF, Peppas NA (1995) pH-Sensitive membranes from poly(vinyl alcohol)/poly(acrylic acid) interpenetrating networks. J Membr Sci 107(3):239–248CrossRefGoogle Scholar
  29. Gupta D, Tator CH, Shoichet MS (2006) Fast-gelling injectable blend of hyaluronan and methylcellulose for intrathecal, localized delivery to the injured spinal cord. Biomaterials 27(11):2370–2379PubMedCrossRefGoogle Scholar
  30. Gupta S, Goswami S, Sinha A (2012) A combined effect of freeze-thaw cycles and polymer concentration on the structure and mechanical properties of transparent PVA gels. Biomed Mater (Bristol UK) 7(1):015006/015001–015006/015008Google Scholar
  31. Hago E-E, Li X (2013) Interpenetrating polymer network hydrogels based on gelatin and PVA by biocompatible approaches: synthesis and characterization. Adv Mater Sci Eng 328763, 328769 ppGoogle Scholar
  32. Hassan CM, Peppas NA (2000a) Structure and applications of Poly(vinyl alcohol) hydrogels produced by conventional crosslinking or by freezing/thawing methods. Adv Polym Sci 153(Biopolymers, PVA Hydrogels Anionic Polymerisation Nanocomposites):37–65CrossRefGoogle Scholar
  33. Hassan CM, Peppas NA (2000b) Structure and morphology of freeze/thawed PVA hydrogels. Macromolecules 33(7):2472–2479CrossRefGoogle Scholar
  34. Hassani LN, Hendra F, Bouchemal K (2012) Auto-associative amphiphilic polysaccharides as drug delivery systems. Drug Discov Today 17(11–12):608–614PubMedCrossRefGoogle Scholar
  35. Hennink WE, Van Nostrum CF (2005) Stereocomplex hydrogels with tunable degradation times. Universiteit Utrecht, Neth. WO2005054318A1, p 30Google Scholar
  36. Hennink WE, Van Nostrum CF, De Jong SJ (2000) Stereocomplex hydrogels. Universiteit Utrecht, Neth. WO2000048576A1, p 65Google Scholar
  37. Herrmann WO, Haehnel W (1928) Polymerized vinyl alcohol. Consortium fur elektrochemische Industrie, US1672156Google Scholar
  38. Hickey AS, Peppas N (1997) Solute diffusion in poly(vinyl alcohol)/poly(acrylic acid) composite membranes prepared by freezing/thawing techniques. Polymer 38(24):5931–5936CrossRefGoogle Scholar
  39. Ibrahim SM, El Salmawi KM (2013) Preparation and properties of carboxymethyl cellulose (CMC)/sodium alginate (SA) blends induced by gamma irradiation. J Polym Environ 21(2):520–527CrossRefGoogle Scholar
  40. Jaspers M, Dennison M, Mabesoone MFJ, MacKintosh FC, Rowan AE, Kouwer PHJ (2014) Ultra-responsive soft matter from strain-stiffening hydrogels. Nat Commun 5:5808PubMedPubMedCentralCrossRefGoogle Scholar
  41. Jeong B, Bae YH, Lee DS, Kim SW (1997) Biodegradable block copolymers as injectable drug-delivery systems. Nature (London) 388(6645):860–862CrossRefGoogle Scholar
  42. Jeong B, Choi YK, Bae YH, Zentner G, Kim SW (1999) New biodegradable polymers for injectable drug delivery systems. J Control Release 62(1–2):109–114PubMedCrossRefGoogle Scholar
  43. Jeong B, Bae YH, Kim SW (2000) Drug release from biodegradable injectable thermosensitive hydrogel of PEG-PLGA-PEG triblock copolymers. J Control Release 63(1–2):155–163PubMedCrossRefGoogle Scholar
  44. Jevne AH, Vegoe BR, Holmblad CM, Cahalan PT (1986) Hydrophilic pressure sensitive biomedical adhesive composition. Medtronic, Inc., USA, p 5 (US4593053A)Google Scholar
  45. Kamoun EA, Kenawy E-RS, Tamer TM, El-Meligy MA, Mohy Eldin MS (2015) Poly (vinyl alcohol)-alginate physically crosslinked hydrogel membranes for wound dressing applications: characterization and bio-evaluation. Arabian J Chem 8(1):38–47CrossRefGoogle Scholar
  46. Kanaya T, Ohkura M, Takeshita H, Kaji K, Furusaka M, Yamaoka H, Wignall GD (1995) Gelation process of poly(vinyl alcohol) as studied by small-angle neutron and light scattering. Macromolecules 28(9):3168–3174CrossRefGoogle Scholar
  47. Kanaya T, Takeshita H, Nishikoji Y, Ohkura M, Nishida K, Kaji K (1998) Micro- and mesoscopic structure of poly(vinyl alcohol) gels determined by neutron and light scattering. Supramol Sci 5(3–4):215–221CrossRefGoogle Scholar
  48. Kang CE, Poon PC, Tator CH, Shoichet MS (2009) A new paradigm for local and sustained release of therapeutic molecules to the injured spinal cord for neuroprotection and tissue repair. Tissue Eng Part A 15(3):595–604PubMedCrossRefGoogle Scholar
  49. Khutoryanskiy V, Khutoryanskaya O, Cook JP, Goodall GW (2011) Hydrogel synthesis by crosslinking of hydrophilic polymers. The University of Reading, UK, p 33 (WO2011089432A1)Google Scholar
  50. Kilan K, Warszynski P (2014) Thickness and permeability of multilayers containing alginate cross-linked by calcium ions. Electrochim Acta 144:254–262CrossRefGoogle Scholar
  51. Kovalcik A (2015) Project report for the project: F-AF2-638-0. Hydrogels based on microbially treated lignin. Initial Funding Programm of Graz University of TechnologyGoogle Scholar
  52. Kumeta K, Nagashima I, Matsui S, Mizoguchi K (2003) Crosslinking reaction of poly(vinyl alcohol) with poly(acrylic acid) (PAA) by heat treatment: effect of neutralization of PAA. J Appl Polym Sci 90(9):2420–2427CrossRefGoogle Scholar
  53. Lawrie G, Keen I, Drew B, Chandler-Temple A, Rintoul L, Fredericks P, Grondahl L (2007) Interactions between alginate and chitosan biopolymers characterized using FTIR and XPS. Biomacromol 8(8):2533–2541CrossRefGoogle Scholar
  54. Li W, Sun B, Wu P (2009) Study on hydrogen bonds of carboxymethyl cellulose sodium film with two-dimensional correlation infrared spectroscopy. Carbohydr Polym 78(3):454–461CrossRefGoogle Scholar
  55. Liang H-F, Hong M-H, Ho R-M, Chung C-K, Lin Y-H, Chen C-H, Sung H-W (2004) Novel method using a temperature-sensitive polymer (methylcellulose) to thermally gel aqueous alginate as a pH-sensitive hydrogel. Biomacromol 5(5):1917–1925CrossRefGoogle Scholar
  56. Lin H-L, Liu W-H, Liu Y-F, Cheng C-H (2002) Complexation equilibrium constants of poly(vinyl alcohol)-borax dilute aqueous solutions—consideration of electrostatic charge repulsion and free ions charge shielding effect. J Polym Res 9(4):233–238CrossRefGoogle Scholar
  57. Liu L-S, Liu S-Q, Ng SY, Froix M, Ohno T, Heller J (1997) Controlled release of interleukin-2 for tumor immunotherapy using alginate/chitosan porous microspheres. J Control Release 43(1):65–74CrossRefGoogle Scholar
  58. Mahanta N, Teow Y, Valiyaveettil S (2013) Viscoelastic hydrogels from poly(vinyl alcohol)-Fe(iii) complex. Biomater Sci 1(5):519–527CrossRefGoogle Scholar
  59. Mahdavinia GR, Mousanezhad S, Hosseinzadeh H, Darvishi F, Sabzi M (2016) Magnetic hydrogel beads based on PVA/sodium alginate/laponite RD and studying their BSA adsorption. Carbohydr Polym 147:379–391PubMedCrossRefGoogle Scholar
  60. Mateescu A, Wang Y, Dostalek J, Jonas U (2012) Thin hydrogel films for optical biosensor applications. Membranes (Basel Switz) 2:40–69Google Scholar
  61. McCrum NG, Read BE, Williams G (1968) Anelastic and dielectric effects in polymeric solids. Wiley, New YorkGoogle Scholar
  62. Mohammed JS, Murphy WL (2009) Bioinspired design of dynamic materials. Adv Mater (Weinheim Ger) 21(23):2361–2374CrossRefGoogle Scholar
  63. Montembault A, Viton C, Domard A (2004) Physico-chemical studies of the gelation of chitosan in a hydroalcoholic medium. Biomaterials 26(8):933–943CrossRefGoogle Scholar
  64. Mueller SA, Weis C, Odermatt EK, Knaebel H-P, Wente MN (2011) A hydrogel for adhesion prevention: characterization and efficacy study in a rabbit uterus model. Eur J Obstet Gynecol Reprod Biol 158(1):67–71CrossRefGoogle Scholar
  65. Nugent MJD, Higginbotham CL (2006) Investigation of the influence of freeze-thaw processing on the properties of polyvinyl alcohol/polyacrylic acid complexes. J Mater Sci 41(8):2393–2404CrossRefGoogle Scholar
  66. Nugent MJD, Hanley A, Tomkins PT, Higginbotham CL (2005) Investigation of a novel freeze-thaw process for the production of drug delivery hydrogels. J Mater Sci: Mater Med 16(12):1149–1158Google Scholar
  67. Ohkura M, Kanaya T, Kaji K (1992) Gelation rates of poly(vinyl alcohol) solution. Polymer 33(23):5044–5048CrossRefGoogle Scholar
  68. Okay O (2015) Self-Healing Hydrogels Formed via Hydrophobic Interactions. Adv Polym Sci 268(Supramolecular Polymer Networks and Gels):101–142CrossRefGoogle Scholar
  69. Oniki T, Ishiguro K (2000) Dentifrices containing polyvinyl alcohol hydrogels. Lion Corp., Japan, p 8 (JP2000159646A)Google Scholar
  70. Petka WA, Hardin JL, McGrath KP, Wirtz D, Tirrell DA (1998) Reversible hydrogels from self-assembling artificial proteins. Science (Washington DC) 281(5375):389–392CrossRefGoogle Scholar
  71. Pezron E, Leibler L, Lafuma F (1989) Complex formation in polymer-ion solutions. 2. Polyelectrolyte effects. Macromolecules 22(6):2656–2662CrossRefGoogle Scholar
  72. Popa-Nita S, Alcouffe P, Rochas C, David L, Domard A (2010) Continuum of structural organization from chitosan solutions to derived physical forms. Biomacromol 11(1):6–12CrossRefGoogle Scholar
  73. Qiao K, Zheng Y, Guo S, Tan J, Chen X, Li J, Xu D, Wang J (2015) Hydrophilic nanofiber of bacterial cellulose guided the changes in the micro-structure and mechanical properties of nf-BC/PVA composites hydrogels. Compos Sci Technol 118:47–54CrossRefGoogle Scholar
  74. Rajagopal K, Ozbas B, Pochan DJ, Schneider JP (2006) Probing the importance of lateral hydrophobic association in self-assembling peptide hydrogelators. Eur Biophys J 35(2):162–169PubMedCrossRefGoogle Scholar
  75. Ricciardi R, Gaillet C, Ducouret G, Lafuma F, Laupretre F (2003) Investigation of the relationships between the chain organization and rheological properties of atactic poly(vinyl alcohol) hydrogels. Polymer 44(11):3375–3380CrossRefGoogle Scholar
  76. Roy N, Saha N, Humpolicek P, Saha P (2010a) Permeability and biocompatibility of novel medicated hydrogel wound dressings. Soft Mater 8(4):338–357CrossRefGoogle Scholar
  77. Roy N, Saha N, Kitano T, Saha P (2010b) Development and characterization of novel medicated hydrogels for wound dressing. Soft Mater 8(2):130–148CrossRefGoogle Scholar
  78. Roy N, Saha N, Kitano T, Saha P (2010c) Novel hydrogels of PVP-CMC and their swelling effect on viscoelastic properties. J Appl Polym Sci 117(3):1703–1710Google Scholar
  79. Ruberti JW, Braithwaite GJC (2004) Methods for controlling gel properties, articles, and forming physically crosslinked vinyl polymer gels. Cambridge Polymer Group, Inc., USA, p 26 (US20040092653A1)Google Scholar
  80. Saha D, Bhattacharya S (2010) Hydrocolloids as thickening and gelling agents in food: a critical review. J Food Sci Technol 47(6):587–597PubMedPubMedCentralCrossRefGoogle Scholar
  81. Saxena A, Tahir A, Kaloti M, Ali J, Bohidar HB (2011) Effect of agar-gelatin compositions on the release of salbutamol tablets. Int J Pharm Invest 1(2):93–98CrossRefGoogle Scholar
  82. Schupper N, Rabin Y, Rosenbluh M (2008) Multiple stages in the aging of a physical polymer gel. Macromolecules (Washington DC, US) 41(11):3983–3994Google Scholar
  83. Seiffert S, Sprakel J (2012) Physical chemistry of supramolecular polymer networks. Chem Soc Rev 41(2):909–930PubMedCrossRefGoogle Scholar
  84. Shoichet MS, Baumann MD, Kang CE (2010) Enhanced stability of inverse thermal gelling composite hydrogels. University of Toronto, Can., p 26 (Cont.-in-part of U.S. Ser. No. 410,831.) (US20100285113A1)Google Scholar
  85. Spiller KL, Laurencin SJ, Charlton D, Maher SA, Lowman AM (2008) Superporous hydrogels for cartilage repair: evaluation of the morphological and mechanical properties. Acta Biomater 4(1):17–25PubMedCrossRefGoogle Scholar
  86. Spoljaric S, Salminen A, Luong ND, Seppala J (2014) Stable, self-healing hydrogels from nanofibrillated cellulose, poly(vinyl alcohol) and borax via reversible crosslinking. Eur Polym J 56:105–117CrossRefGoogle Scholar
  87. Stauffer SR, Peppas NA (1992) Poly (vinyl alcohol) hydrogels prepared by freezing-thawing cyclic processing. Polymer 33(18):3932–3936CrossRefGoogle Scholar
  88. Swamy BY, Yun Y-S (2015) In vitro release of metformin from iron (III) cross-linked alginate-carboxymethyl cellulose hydrogel beads. Int J Biol Macromol 77:114–119PubMedCrossRefGoogle Scholar
  89. Takahashi N, Kanaya T, Nishida K, Kaji K (2003) Effects of cononsolvency on gelation of poly(vinyl alcohol) in mixed solvents of dimethyl sulfoxide and water. Polymer 44(15):4075–4078CrossRefGoogle Scholar
  90. Takeshita H, Kanaya T, Nishida K, Kaji K (1999) Gelation process and phase separation of PVA solutions as studied by a light scattering technique. Macromolecules 32(23):7815–7819CrossRefGoogle Scholar
  91. Tsujiyama S-I, Nitta T, Maoka T (2011) Biodegradation of polyvinyl alcohol by Flammulina velutipes in an unsubmerged culture. J Biosci Bioeng 112(1):58–62PubMedCrossRefGoogle Scholar
  92. Urano T, Ina S (2004) Lime-based coating material compositions containing carrageenan for plastering. Murakashi Lime Industry Co., Ltd., Japan, p 26 (WO2004031098A1)Google Scholar
  93. Wang H-H, Shyr T-W, Hu M-S (1999) The elastic property of polyvinyl alcohol gel with boric acid as a crosslinking agent. J Appl Polym Sci 74(13):3046–3052CrossRefGoogle Scholar
  94. Wang S, Zhang Q, Tan B, Liu L, Shi L (2011) pH-Sensitive poly(Vinyl alcohol)/sodium carboxymethylcellulose hydrogel beads for drug delivery. J Macromol Sci Part B Phys 50(12):2307–2317CrossRefGoogle Scholar
  95. Wang H, Shi Y, Wang L, Yang Z (2013a) Recombinant proteins as cross-linkers for hydrogelations. Chem Soc Rev 42(3):891–901PubMedCrossRefGoogle Scholar
  96. Wang M-D, Zhai P, Schreyer DJ, Zheng R-S, Sun X-D, Cui F-Z, Chen X-B (2013b) Novel crosslinked alginate/hyaluronic acid hydrogels for nerve tissue engineering. Front Mater Sci 7(3):269–284CrossRefGoogle Scholar
  97. Wu X-Y, Huang S-W, Zhang J-T, Zhuo R-X (2004) Preparation and characterization of novel physically cross-linked hydrogels composed of poly(vinyl alcohol) and amine-terminated polyamidoamine dendrimer. Macromol Biosci 4(2):71–75PubMedCrossRefGoogle Scholar
  98. Xiao C, Gao Y (2008) Preparation and properties of physically crosslinked sodium carboxymethylcellulose/poly(vinyl alcohol) complex hydrogels. J Appl Polym Sci 107(3):1568–1572CrossRefGoogle Scholar
  99. Yadav R, Kandasubramanian B (2013) Egg albumin PVA hybrid membranes for antibacterial application. Mater Lett 110:130–133CrossRefGoogle Scholar
  100. Yan C-Q, Pochan DJ (2010) Rheological properties of peptide-based hydrogels for biomedical and other applications. Chem Soc Rev 39(9):3528–3540PubMedPubMedCentralCrossRefGoogle Scholar
  101. Zhang H, Yu L, Ding J (2008) Roles of hydrophilic homopolymers on the hydrophobic-association-induced physical gelling of amphiphilic block copolymers in water. Macromolecules (Washington DC US) 41(17):6493–6499Google Scholar
  102. Zhang H, Xia H, Zhao Y (2012) Poly(vinyl alcohol) hydrogel can autonomously self-heal. ACS Macro Lett 1(11):1233–1236CrossRefGoogle Scholar
  103. Zhang Y, Hui B, Ye L (2015) Reactive toughening of polyvinyl alcohol hydrogel and its wastewater treatment performance by immobilization of microorganisms. RSC Adv 5(111):91414–91422CrossRefGoogle Scholar
  104. Zou X, Zheng D, Yu G, Wang H, Yang L, Shan J (2015) Preparation of poly(vinyl alcohol)/calcium alginate hydrogel and the study on mechanical property. Huagong Xinxing Cailiao 43(6):118–120, 123Google Scholar

Copyright information

© Springer Nature Singapore Pte Ltd. 2018

Authors and Affiliations

  1. 1.Competence Centre for Wood Composites and Wood Chemistry (Wood K Plus)Kompetenzzentrum Holz GmbHLinzAustria
  2. 2.Faculty of Chemistry, Department of Food Chemistry and BiotechnologyBrno University of TechnologyBrnoCzech Republic

Personalised recommendations