Advertisement

Ceramics for Reciprocating Engines: An Application Review

  • H. Takao
  • A. Okada
  • M. Ando
  • Y. Akimune
  • N. Hirosaki
Chapter

Abstract

The application of ceramics to reciprocating engines is reviewed with the aim of predicting near-future applications. The exceptional properties of ceramics enabling them to meet the changing social environment are now clearly known to enhance their further application, and the material cost is shown to influence the maximum amount of materials designed for automobile use. Candidates for further application of ceramics to automobiles are thought to be classified into two categories. One is aimed at substituting such conventional metal parts as the tappet, piston pin and cam lobe, where cost reduction facilitates expanding application. The second category involves use as a key material in helping to ease ecological problems such as decreasing CO2 emission by decreasing fuel consumption. Extensive work being undertaken to develop energy recovery system as well as to further clarify combustion behaviour in reciprocating engines is indispensable for advancing the application of ceramics to heat insulation components of the combustion chamber, while novel ceramic processing that remarkably reduces production cost is strongly required to generate applications that reflect its light weight and outstanding wear resistance properties. Because of the strong potential of ceramics for use in high-thermal efficiency engines, broad-ranging application of ceramics in the near future will be achieved through close cooperation between diverse fields of research.

Preview

Unable to display preview. Download preview PDF.

Unable to display preview. Download preview PDF.

References

  1. 1.
    Taguchi, M., Application of high-technology ceramics in Japanese automobiles. Adv. Ceram. Mater., 1987, 2, 754–62.Google Scholar
  2. 2.
    Owens, J. S., Hinton, J. W., Insley, R. H. and Poland, M. E., Development of ceramic insulators for spark plugs. Amer. Ceram. Soc. Bull., 1977, 56, 437–9, 443.Google Scholar
  3. 3.
    Nishio, K., Spark plugs. Serammikusu (in Japanese), 1982, 17, 15–19.Google Scholar
  4. 4.
    Nishio, K., Effect of resistor spark plug on noise suppression. Nainen-Kikan (in Japanese), 1973, 12, [10] 31–40.Google Scholar
  5. 5.
    Nishio, K., Trend in resistor spark plugs. J. Soc. Automotive Engineers Jpn. (in Japanese), 1982, 36, 1082–87.Google Scholar
  6. 6.
    Fleming, W. J., Howarth, D. S. and Eddy, D. S., Sensor for on-vehicle detection of engine exhaust gas composition. SAE Paper, 1973, No. 730575.Google Scholar
  7. 7.
    Dueker, H., Friese, K. H. and Haecker, W. D., Ceramic aspect of the Bosch Lambdasensor, SAE Paper, 1974, No. 750223.Google Scholar
  8. 8.
    Hamann, E., Manger, H. and Steinke, L., Lamda-sensor with Y2O3-stabilized ZrO2-ceramic for application in automobile emission control system. SAE Paper, 1977, No. 770401.Google Scholar
  9. 9.
    Tien, T. Y., Stadler, H. L., Gibbons, E. F. and Zacmanidis, P. J., TiO2 as an air-to-fuel ratio sensor for automobile exhausts. Amer. Ceram. Soc. Bull., 1975, 54 280–82, 85.Google Scholar
  10. 10.
    Esper, M. J., Logothetis, E. M. and Chu, J. C., Titania exhaust gas sensor for automobile applications. SAE Paper, 1979, No. 790140.Google Scholar
  11. 11.
    Takami, A., Matsuura, T., Sekita, T., Okawa, T. and Watanabe, Y., Progress in lead tolerant titania exhaust gas oxygen sensors. SAE Paper, 1985, No. 850381.Google Scholar
  12. 12.
    Takami, A., Matsuura, T., Miyata, S., Furusaki, K. and Watanabe, Y., Effort of precious metal catalyst on TiO2 thick film HEGO sensor with multi-layer alumina substrates. SAE Paper, 1987, No. 870290.Google Scholar
  13. 13.
    Kamo, T., Chujo, Y., Akatsuka, A., Nakano, J. and Suzuki, M., Lean mixture sensor. SAE Paper, 1985, No. 850380.Google Scholar
  14. 14.
    Schwochert, H. W., Performance of a catalytic converter on nonleaded fuel. SAE Paper, 1969, No. 690503.Google Scholar
  15. 15.
    Howitt, J. S., Thin wall ceramics as monolithic catalyst supports. SAE Paper, 1980, No. 800082.Google Scholar
  16. 16.
    Arrigoni, Y., Calvi, G. F., Gaetani, B., Giavazzi, F. and Zanoni, G. F., Recent advances in the detection of knock in S.I. engines. SAE Paper, 1978, No. 780153.Google Scholar
  17. 17.
    Kraus, B. J., Godici, P. E. and King, W. H., Reduction of octane requirement by knock sensor spark retard system. SAE Paper, 1978, No. 780155.Google Scholar
  18. 18.
    Oota, J. and Kamo, T., Knock sensor. Serammikusu (in Japanese), 1982, 1730–33.Google Scholar
  19. 19.
    Ueda, A., Knock control system. J. Soc. Automotive Engineers Jpn. (in Japanese), 1982, 36, 1074–81.Google Scholar
  20. 20.
    Ishikawa, K. and Kino, K., in Fine Ceramic Handbook (in Japanese), ed. Hamano, K., Asakura Shoten, Tokyo, 1984, pp. 950.Google Scholar
  21. 21.
    Oki, M., Nara, A. and Hon, M., PTC heater for automobiles. Erekutoroniku Seramikusu (in Japanese), 1988, 67–71.Google Scholar
  22. 22.
    Kawamura, H. and Yamamoto, S., Improvement of diesel engine startability by ceramic glow plug start system. SAE Paper, 1983, No. 830580.Google Scholar
  23. 23.
    Matsuoka, H., Kawamura, H. and Toeda, S., Development of ceramic precombustion chamber for the automobile diesel engines. SAE Paper, 1984, No. 840426.Google Scholar
  24. 24.
    Kamiya, S., Murachi, M., Kawamoto, H., Sato, S., Kawakami, S. and Suzuki, S., Silicon nitride swirl chamber for high power turbocharged diesel engines. SAE Paper, 1985, No. 850523.Google Scholar
  25. 25.
    Sakurai, S., and Matsuoka, T., Development of low particulate engine with ceramic swirl chamber. SAE Paper, 1986, No. 861407.Google Scholar
  26. 26.
    Tanimoto, I., Kano, M. and Abe, M., Trend in wear-resistant materials for valve train. J. Soc. Automotive Engineers Jpn. (in Japanese), 1988, 42 711–18.Google Scholar
  27. 27.
    Ogawa, Y., Machida, M., Miyamura, N., Tashiro, K and Sugano, M., Ceramic rocker arm insert for internal combustion engines. SAE Paper, 1986, No. 860397.Google Scholar
  28. 28.
    Katayama, K, Watanabe, T., Matoba, K. and Katoh, N., Development of Nissan high response ceramic turbocharger rotor. SAE Paper, 1986, No. 861128.Google Scholar
  29. 29.
    Matsuo, I. and Nishiguchi, F., The development of second generation ceramic turbocharger. SAE Paper, 1988, No. 880703.Google Scholar
  30. 30.
    New materials technologies in Nissan. Nissan Koho Shiryo (in Japanese), Nissan Motor Co., Ltd., Tokyo October 1985.Google Scholar
  31. 31.
    Kimura, S., Matsui, Y. and Ito, T., Effects of combustion chamber insulation on the heat rejection and thermal efficiency of diesel engines. To be presented in 1992 SAE International Congress.Google Scholar
  32. 32.
    Gagliardi, J. C. and Ghannam, F. E., Effects of tetraethyllead concentration on exhaust emissions in customer type vehicle operation. SAE Paper, 1969, No. 690015.Google Scholar
  33. 33.
    Weaver, E. E., Effects of tetraethyllead on catalyst life and efficiency in customer type vehicle operation. SAE Paper, 1969, No. 690016.Google Scholar
  34. 34.
    Kosuge, H., Ito, T. and Ishii, M., Effects of insulation of combustion chamber on performance of a diesel engine. J. Soc. Automotive Engineers Jpn. (in Javanese), 1986, 33 25–32.Google Scholar
  35. 35.
    Kamo, R and Bryzik, W., Adiabatic turbocompound engine performance prediction. SAE Paper, 1978, No. 780068.Google Scholar
  36. 36.
    Bryzik, W. and Kamo, R., TACOM/Cummins adiabatic engine programs. SAE Paper, 1983, No. 830314.Google Scholar
  37. 37.
    Howitt, J. S. and Montierth, M. R., Cellular ceramic diesel particulate filter. SAE Paper, 1981, No. 810114.Google Scholar
  38. 38.
    Wade, W. R., White, J. E. and Florek, J. J., Diesel particulate trap regeneration techniques. SAE Paper, 1981, No. 810118.Google Scholar
  39. 39.
    Hensler, P., Kirchdorffer, G. and Jaksch, A., The Porsche 944 turbo engine. MZT Motertechnische Zeitschrift, 1985, 46 39–42, 45–47.Google Scholar
  40. 40.
    McLean, A. F., Ceramics in small vehicular gas turbines. in Ceramics for High-Performance Applications, ed. Burke, J. J., Gorum, A. E. and Katz, R. N., Brook Hill, 1974, pp. 9–36.Google Scholar
  41. 41.
    Samejima, Y., Kyocera Research Laboratory. Gas Turbine Soc. J. (in Japanese), 1988, 15 129–31.Google Scholar

Copyright information

© Elsevier Science Publishers Ltd and MPA Stuttgart 1992

Authors and Affiliations

  • H. Takao
    • 1
  • A. Okada
    • 1
  • M. Ando
    • 1
  • Y. Akimune
    • 1
  • N. Hirosaki
    • 1
  1. 1.Central Engineering LaboratoriesNissan Motor Co., Ltd.Yokosuka 237Japan

Personalised recommendations