Advertisement

SSCAD on a Desktop Computer

  • J. J. Jonatowski
  • D. Koutsoubis
Conference paper

Abstract

Space Structures International Corp. is a designer, fabricator and installer of three-dimensional double-layer grid type structures. Up to two years ago, the analyses of such structures were performed through a computer service bureau, utilizing a well known, commercially available, general purpose finite element program. The program could only perform analyses; it had no design capabilities. Although the program ran on the Cray-l computer which had extremely fast processing power, the actual turnaround time was not. Turnaround time was affected by the following factors: user priority which affected cost, system usage load on the service bureau and delivery of output results. Because Space Structures did not have an on-site high speed printer and its location was somewhat distant from the service bureau, computer output results were delivered by messenger service and were normally available for review 24 hours after submittal of the computer run. In addition to the slow turnaround, the costs of messenger service and service bureau, which included batch processing, connect and storage charges, became too high.

Preview

Unable to display preview. Download preview PDF.

Unable to display preview. Download preview PDF.

References

  1. 1.
    Gere, J.M., and Weaver, W., Jr. (1956) Analysis of Framed Structures, D. Van Nostrand Company, Inc. Princeton, NJGoogle Scholar
  2. 2.
    Hinton, E., and Owen, D.R.J. (1977) Finite Element Programming, Academic Press, London, EnglandGoogle Scholar
  3. 3.
    Irons, B.M. (1970) “A Frontal Solution Program”, Int. J. Num. Meth. Eng., Vol. 2, pp. 5–32CrossRefzbMATHGoogle Scholar
  4. 4.
    Jonatowski, J.J., and Koutsoubis, D. (1984) “Microcomputer Engineering of Large Space Strusses”, Proc. of the Third Conf. in Computing in Civil Eng., San Diego, CA, pp 498–505Google Scholar
  5. 5.
    Jonatowski, J.J., and Koutsoubis, D. (1984) “A Microcomputer-Aided Design System for Large Space Structures”, Third Int. Conf. on Space Structures, Univ. of Surrey, UK, pp. 301–305Google Scholar
  6. 6.
    Ralston, A (1965) A First Course in Numerical Analysis, McGraw-Hill, New York, NYzbMATHGoogle Scholar
  7. 7.
    1982 Specifications for Aluminum Structures, The Aluminum Association, Inc., Washington, D.C., 4th Ed.Google Scholar
  8. 8.
    (1978) Specifications for the Design, Fabrication and Erection of Structural Steel for Buildings, American Institute of Steel Construction, Chicago, IL, 8th Ed.Google Scholar
  9. 9.
    Zienkiewicz, O.C. (1971) The Finite Element Method in Engineering Science, McGraw-Hill, New York, N.Y.zbMATHGoogle Scholar

Copyright information

© Springer-Verlag Berlin Heidelberg 1985

Authors and Affiliations

  • J. J. Jonatowski
    • 1
  • D. Koutsoubis
    • 1
  1. 1.Space Structures Int. Corp.PlainviewUSA

Personalised recommendations