Advertisement

LIF Visualization of Liquid Fuel in the Cylinder of a Spark Ignition Engine

  • Peter O. Witze
  • Robert M. Green
Conference paper

Abstract

Laser-induced fluorescence (LIF) has been used to investigate the presence and location of liquid fuel films on the combustion chamber walls of a port fuel-injected engine. A frequency-tripled, Nd: YAG laser provided full-field illumination of the combustion chamber through a window in the piston crown. LIF from liquid-phase gasoline was imaged onto a gated, intensified solid-state camera, and recorded in real-time, synchronous with the engine, on video tape. The technique has been demonstrated on a production, four-valve head, comparing open and closed-valve injection timing. A cold start was simulated by motoring the engine at constant speed before enabling injection and ignition. For open-valve injection, liquid fuel was observed on and around the exhaust valves during the first injected cycle, and combustion occurred by the fourth cycle. For closed-valve injection, a detectable fuel film was seen near the intake valve seat by the fifth cycle, and combustion began by the eighth cycle.

Keywords

Spark-ignition engine Liquid-fuel visualization Laser-induced fluorescence 

Preview

Unable to display preview. Download preview PDF.

Unable to display preview. Download preview PDF.

References

  1. Almkvist, G., Denbratt, I., Josefsson, G. & Magnusson, I. 1995, Measurements of Fuel Film Thickness in the Inlet Port of an S.I. Engine by Laser Induced Fluorescence, SAE Paper No. 952483CrossRefGoogle Scholar
  2. Felton, P. G., Kyritsis, D. C. & Fulcher, S. K. 1995, LIF Visualization of Liquid Fuel in the Intake Manifold During Cold Start, SAE Paper No. 952464CrossRefGoogle Scholar
  3. Fry, M., Nightingale, C. & Richardson, S. 1995, High-Speed Photography and Image Analysis Techniques Applied to Study Droplet Motion within the Porting and Cylinder of a 4-Valve SI Engine, SAE Paper No. 952525CrossRefGoogle Scholar
  4. Hoult, D. P., Lux, J. P., Wong, V. W. & Billian, S. A. 1988, Calibration of Laser Fluorescence Measurements of Lubricant Film Thickness in Engines, Trans. SAE vol. 97, sec. 3, p. 576Google Scholar
  5. Le Coz, J-F., Catalano, C. & Baritaud, T. 1994, Application of Laser Induced Fluorescence for Measuring the Thickness of Liquid Films on Transparent Walls, Seventh International Symposium on the Application of Laser Techniques to Fluid Mechanics, Lisbon, p. 29.3.1Google Scholar
  6. Saito, K., Sekiguchi, K., Imatake, N., Takeda, K. & Yaegashi, T. 1995, A New Method to Analyze Fuel Behavior in a Spark Ignition Engine, SAE Paper No. 950044CrossRefGoogle Scholar
  7. Shin, Y., Cheng, W. K. & Hey wood, J. B. 1994, Liquid Gasoline Behavior in the Engine Cylinder of a SI Engine, SAE Paper No 941872CrossRefGoogle Scholar
  8. Smart, A. E. & Ford, R. A. J. 1974, Measurement of Thin Liquid Films by a Fluorescence Technique,Wear 29, p. 41CrossRefGoogle Scholar

Copyright information

© Springer-Verlag Berlin Heidelberg 1997

Authors and Affiliations

  • Peter O. Witze
    • 1
  • Robert M. Green
    • 1
  1. 1.Combustion Research FacilitySandia National LaboratoriesLivermoreUSA

Personalised recommendations