Force measurements on hypersonic waveriders in the IISc hypersonic shock tunnel HST2
The drag and lift coefficients for a viscous optimized Mach 6 conical waverider has been measured using an accelerometer force balance system in the IISc hypersonic shock tunnel. A rubber bush placed in between the waverider model and the steel sting ensures unrestrained motion to the model during shock tunnel testing (500 /gms). Two accelerometers mounted on the model are used to measure the model accelerations in the axial and normal directions. The measured value of lift to drag ratio at zero angle of incidence for the IISc conical waverider with viscous optimized leading edge is 2.149, which compares well with the value reported in the open literature (Anderson et al 1991) for similar class of waveriders designed for a flight Mach number of 6. The details of the experimental study along with illustrative numerical results are discussed in this paper.
KeywordsMach Number Lift Coefficient Hypersonic Vehicle Pressure Drag Shock Tunnel
Unable to display preview. Download preview PDF.
- 1.L.H. Townend: Research and design of lifting re-entry. Progress in Aerospace Sciences 18, 1Google Scholar
- 2.J.D. Jr. Anderson, Mark J Lewis, Ajay P Kothari, Stephen Corda: Hypersonic wave riders for planetary atmospheres. AIAA J. 28, 401 (1991)Google Scholar
- 3.J.D. Jr. Anderson, F. Ferguson and M.J. Lewis: Hypersonic waveriders for high altitude applications. AIAA Paper 91-0530 (1991)Google Scholar
- 4.S. Corda and J.D. Jr. Anderson: Viscous optimized hypersonic waveriders designed from axisymmetric flowfields. AIAA Paper 88-0369 (1988)Google Scholar