Advertisement

Broadband Impedance Matching

  • Amal Banerjee
Chapter

Abstract

This chapter examines in detail the common broadband impedance matching subcircuits, and detailed derivations of the design equations are provided. The discussion starts with an analysis of the Bode–Fano inequalities that impose restrictions on the gain and bandwidth of broadband impedance matching subcircuits. However, applying the Bode–Fano inequalities for designing and implementing practical real-world broadband impedance matching subcircuits is very difficult. To circumvent the fact that Bode–Fano inequalities arise from the frequency dependency of the reactances of both a capacitor and an inductor, two (Zobel transform, negative impedance converter) extremely efficient and powerful techniques to neutralize the reactive part of a complex impedance are examined in detail, and the design equations are derived. By neutralizing the reactive part of a complex impedance, the impedance is “converted” into a pure resistor, forcing the gain to remain constant over the entire operating frequency range. Even after the reactive part of a complex impedance is neutralized, the issue of unequal source and load resistors remains. To tackle that, the Norton subnetwork or transform scheme is examined in detail, and design equations are derived. The use of an ideal transformer as an impedance matching device, as well as a transmission line impedance transformer (Guanella and Ruthroff), is examined in detail, along with the real frequency impedance matching technique.

Keywords

Bode–Fano inequalities Gain bandwidth Zobel transform Negative impedance converter Capacitive/inductive reactance Frequency dependency Ideal transformer Guanella and Ruthroff transmission line impedance transformer Real frequency impedance transform Hilbert transform Driving impedance Foster network 

References

  1. 1.
    Bode HW (1945) Network analysis and feedback amplifier design. Xan Nostrand, New YorkGoogle Scholar
  2. 2.
    Fano RM (1948) Theoretical limitations on the broadband matching of arbitrary impedances MTT. Tech. Report No 41 MITGoogle Scholar
  3. 3.
    Zobel OJ (1982) Distortion correction in electrical circuits with constant resistance networks. Bell Syst Tech J 7:438CrossRefGoogle Scholar
  4. 4.
    Albean D (1995) Zobel networks tame reactive loads EDN p 82Google Scholar
  5. 5.
    Cottee RM, Joines W (1979) Lumped and distributed networks for impedance matching of complex loads. IEEE Trans Circuits Syst 1x-26(5):316–329CrossRefGoogle Scholar
  6. 6.
    Matthaei G (1964) Tables of Chebyschev impedance transforming networks of low pass filter form. In: Proceedings of the IEEEGoogle Scholar
  7. 7.
    Zverev AI Handbook of filter synthesis. - ISBN-10: 0471749427 ISBN-13: 978047174942. WileyGoogle Scholar
  8. 8.
    Grebennikov A. RF and microwave power amplifier design - ISBN 0-07-144493-9 Library of Congress – TK7871.58.P6G72 2004 621.395—dc22Google Scholar
  9. 9.
    Carlin HJ, Amstutz P (1981) On optimum broadband matching. IEEE Trans Circuits Syst 28:401–405CrossRefGoogle Scholar
  10. 10.
    Carlin HJ, Civalleri PP (1985) On flat gain with frequency-dependent terminations. IEEE Trans Circuits Syst 32:827–839CrossRefGoogle Scholar
  11. 11.
    Yarman BS, Fettweis A (1990) Computer-aided double matching via parametric representation of Brune functions. IEEE Trans Circuits Syst 37:212–222CrossRefGoogle Scholar
  12. 12.
    Carlin HJ, Yarman BS (1983) The double matching problem: analytic and real frequency solutions. IEEE Trans Circuits Syst 30:15–28CrossRefGoogle Scholar
  13. 13.
    Yarman BS (1982) A simplified real frequency technique for broadband matching complex generator to complex loads. RCA Rev 43:529–541Google Scholar
  14. 14.
    Yarman BS (1982) Real frequency broadband matching using linear programming. RCA Rev 43:626–654Google Scholar
  15. 15.
    Youla DC (1964) A new theory of broadband matching. IEEE Trans Circuit Theory 11:30–50CrossRefGoogle Scholar
  16. 16.
    Guanella G (1944) New method of impedance matching in radio-frequency circuits. Brown Boveri Rev 31:327–329Google Scholar
  17. 17.
    Ruthroff GL (1959) Some broadband transformers. In: Proceedings of the IREGoogle Scholar
  18. 18.
    Linvill JG (June 1953) Transistor negative impedance converters. Proc IRE 41:725–729CrossRefGoogle Scholar
  19. 19.
    Perry AK (1973) Broadband antenna systems realized from active circuit conjugate impedance. Naval Postgraduate School, MontereyGoogle Scholar
  20. 20.
    Kaneko T, Horii Y, Akiyama M (2014) A novel negative impedance converter with an emitter follower circuit for stable non-foster elements. In: EuMC2014, Proceedings, pp 988–991Google Scholar
  21. 21.
    Song KS (2011) Non-Foster impedance matching and loading networks for electrically small antennas. Dissertation of Electrical and Computer Engineering, The Ohio State UniversityGoogle Scholar
  22. 22.
    Yamanaka S, Utoku Y, Horii Y (2015) A non-Foster negative capacitance generated by parasitic components of operational amplifiers. Korea-Japan Metamater Forum 2015Google Scholar

Copyright information

© Springer Nature Switzerland AG 2019

Authors and Affiliations

  • Amal Banerjee
    • 1
  1. 1.Analog ElectronicsKolkataIndia

Personalised recommendations