Advertisement

Balancing Efficiency, EMI, and Application Cost in Class-D Audio Amplifiers

  • Marco BerkhoutEmail author
Chapter

Abstract

Class-D amplifiers typically require more external components than class-AB amplifiers to achieve high efficiency and keep electromagnetic interference (EMI) under control. In this chapter, an overview is given of innovative class-D architectures and how they balance efficiency, EMI, and application cost.

References

  1. 1.
    Nielsen K. A review and comparison of pulse width modulation (PWM) methods for analog and digital input switching power amplifiers, presented at the 102nd Conv. Munich: AES; 1997. Preprint 4446.Google Scholar
  2. 2.
    Berkhout M, Dooper L. Class-D audio amplifiers in mobile applications. IEEE Trans Circuits Syst I, Reg Papers. 2010;57(5):992–1002.MathSciNetCrossRefGoogle Scholar
  3. 3.
    Gaalaas E, Liu BY, Nishimura N, Adams R, Sweetland K. Integrated stereo ΣΔ class D amplifier. IEEE J Solid State Circuits. 2005;40(12):2388–97.CrossRefGoogle Scholar
  4. 4.
    Nielsen K. Parallel Phase Shifted Carrier Pulse Width Modulation (PSCPWM) - A novel approach to switching power amplifier design, presented at the 102nd Conv. Munich: AES; 1997. Preprint 4447.Google Scholar
  5. 5.
    Dooper L, Berkhout M. A 3.4W digital-in class-D audio amplifier in 0.14μm CMOS. IEEE J Solid State Circuits. 2012;47(7):1524–34.CrossRefGoogle Scholar
  6. 6.
    Ma H, van der Zee R, Nauta B. A high-voltage class-D power amplifier with switching frequency regulation for improved high-efficiency output power range. IEEE J Solid State Circuits. 2015;50(6):1451–62.CrossRefGoogle Scholar
  7. 7.
    Texas Instruments. LC filter design. Application Report SLAA701A. http://www.ti.com/lit/an/slaa701a/slaa701a.pdf.
  8. 8.
    Nagari A, et al. An 8 2.5 W 1%-THD 104 dB(A)-dynamic-range class-D audio amplifier with ultra-low EMI system and current sensing for speaker protection. IEEE J Solid State Circuits. 2012;47(12):3068–80.CrossRefGoogle Scholar
  9. 9.
    Berkhout M, Dooper L, Krabbenborg B. A 4Ω 2.65W class-D audio amplifier with embedded DC-DC boost converter, current sensing ADC and DSP for adaptive speaker protection. IEEE J Solid State Circuits. 2013;48(12):2952–61.CrossRefGoogle Scholar
  10. 10.
    CS35L32 boosted class D amplifier with speaker-protection monitoring and flash LED drivers, Cirrus Logic, Inc. 2015, online available: http://www.cirrus.com/products/cs35l32.
  11. 11.
    TFA9891 9.5 V boosted audio system with adaptive sound maximizer and speaker protection, NXP Semiconductors. 2016, online available: http://www.nxp.com/docs/en/data-sheet/TFA9891_SDS.pdf.
  12. 12.
    MAX98308 3.3W mono class DG multilevel audio amplifier, Maxim Integrated. 2016, Online Available: http://www.maximintegrated.com/en/products/analog/audio/MAX98308.html.
  13. 13.
    Cerutti C. Multilevel class-D amplifier. U.S. Patent 8,558,617 B2, Oct 15, 2013.Google Scholar
  14. 14.
    CS35L33 boosted class-D amplifier, Cirrus Logic. http://www.cirrus.com/products/cs35l33.
  15. 15.
    Balmelli P, et al. A low-EMI 3-W audio class-D amplifier compatible with AM/FM radio. IEEE J Solid State Circuits. 2013;48(8):1771–82.CrossRefGoogle Scholar
  16. 16.
    Siniscalchi PP, Hester RK. A 20 W/channel class-D amplifier with near-zero common-mode radiated emissions. IEEE J Solid State Circuits. 2009;44(12):3264–71.CrossRefGoogle Scholar
  17. 17.
    Høyerby M, Jakobsen JK, Midtgaard J, Hansen TH. A 2×70 W monolithic five-level class-D audio power amplifier in 180 nm BCD. IEEE J Solid State Circuits. 2016;51(12):2819–29.CrossRefGoogle Scholar
  18. 18.
    MA12070P filterless and high-efficiency +4V to +26V audio amplifier with I2S digital input, Merus Audio. 2017, online available: http://www.merus-audio.com.
  19. 19.
    TAS6424-Q1 75-W, 2-MHz digital input 4-channel automotive Class-D audio amplifier with load-dump protection and I2C diagnostics, Texas Instruments, Inc. 2017, online available: http://www.ti.com/product/TAS6424-Q1.
  20. 20.
    Adduci P, Botti E, Dallago E, Venchi G. Switching power audio amplifiers with high immunity to the demodulation filter effects. J Audio Eng Soc. 2012;60(12):1015–23.Google Scholar
  21. 21.
    Schinkel D, et al. A multiphase Class-D automotive audio amplifier with integrated low-latency ADCs for digitized feedback after the output filter. IEEE J Solid State Circuits. 2017;52(12):3181–93.CrossRefGoogle Scholar

Copyright information

© Springer Nature Switzerland AG 2019

Authors and Affiliations

  1. 1.NXP SemiconductorsNijmegenThe Netherlands

Personalised recommendations