Advertisement

Sustainable Reconstruction in Conditions of Dense Urban Development

  • Talal Awwad
  • Vladimir Gruzin
  • Vladimir Kim
Conference paper
Part of the Sustainable Civil Infrastructures book series (SUCI)

Abstract

Sustainable Reconstruction in conditions of dense urban development is one of the urgent problems of modern construction. It is characterized by a significant increase in the load on existing foundations, the performance of all types of work in fairly difficult soil conditions and cramped situations that limit a performance of certain technological operations and an application of the necessary devices of mechanization. Therefore, a particular importance is referred to the using of advanced technologies that ensure minimum constructional, environmental and material risks, taking into account security measures, for both construction team and the residents in the area of construction. However, the current trend leads to a significant increase in the cost of reconstruction. So, innovative solutions that ensure a performance of required indicators of bearing capacity with reducing the cost of reconstruction works are undoubtedly relevant. This paper shows that the use of composite materials will significantly improve the reliability and durability of construction, as well as reduce the expenditure of building materials and the time of reconstruction. The paper also presents results of the research on development of rational technological and constructive solutions of reconstruction in dense building areas.

References

  1. Abiodun, A.A., Nalbantoglu, Z.: Lime pile techniques for the improvement of clay soils. Can. Geotech. J. 52(6), 760–768 (2015)CrossRefGoogle Scholar
  2. Awwad, T.: Problems of Syrian historical monuments, destroyed by military action: diagnostics, strengthening and reconstruction, challenges and innovations in geotechnics. In: Proceedings of the Eighth Asian Young Geotechnical Engineering Conference, pp. 21–27 (2016)Google Scholar
  3. Awwad, T. Al-Asali, B.E.: Efficiency of improving the specifications of soil lenses that are formed near the tunnel during the stages of its investment. In: Proceedings of the TC207 ISSMGE Conference, Soil-Structure Interaction, Underground Structures and Retaining Walls. Advances in Soil Mechanics and Geotechnical Engineering, vol. 4, pp. 111–118 (2014)Google Scholar
  4. Awwad, T., Donia, M.: The efficiency of using a seismic base isolation system for a 2D concrete frame founded upon improved soft soil with rigid inclusions. Earthq. Eng. Eng. 15(1), 49–60 (2016)CrossRefGoogle Scholar
  5. Awwad, L., Rahme, N., Awwad, T.: The rehabilitation of historic buildings—case-study Al-Thakana Al-Hamidieh in Syria, challenges and innovations in geotechnics. In: Proceedings of the Eighth Asian Young Geotechnical Engineering Conference, pp. 297–302 (2016)Google Scholar
  6. Awwad, T., Donia, M., Awwad, L.: Effect of a stiff thin foundation soil layer’s depth on dynamic response of an embankment dam. Procedia Eng. 189(2017), 525–532 (2017)CrossRefGoogle Scholar
  7. Chakraborty, M., Kumar, J.: Bearing capacity of circular foundations reinforced with geogrid sheets. Soils Found. 54(4), 820–832 (2014)CrossRefGoogle Scholar
  8. Chen, Q., Abu-Farsakh, M.: Ultimate bearing capacity analysis of strip footings on reinforced soil foundation. Soils Found. 55(1), 74–85 (2015)CrossRefGoogle Scholar
  9. Ishikura, R., Yasufuku, N., Brown, M.: An estimation method for predicting final consolidation settlement of ground improved by floating soil cement columns. Soils Found. 56(2), 213–227 (2016)CrossRefGoogle Scholar
  10. Killeen, M.M., McCabe, B.A.: Settlement performance of pad footings on soft clay supported by stone columns: a numerical study. Soils Found. 54(4), 760–776 (2014)CrossRefGoogle Scholar
  11. Larsson, S., Rothhämel, M., Jacks, G.: A laboratory study on strength loss in kaolin surrounding lime–cement columns. Appl. Clay Sci. 44(1–2), 116–126 (2009)CrossRefGoogle Scholar
  12. Ng, K.S., Tan, S.A.: Design and analyses of floating stone columns. Soils Found. 54(4), 478–487 (2014)CrossRefGoogle Scholar
  13. Tafreshi, S.N.M., Sharifi, P., Dawson, A.R.: Performance of circular footings on sand by use of multiple-geocell or planar geotextile reinforcing layers. Soils Found. 56(6), 984–997 (2016)Google Scholar
  14. Ye, G., Zhang, Q., Zhang, Z., Chang, H.: Centrifugal modeling of a composite foundation combined with soil-cement columns and prefabricated vertical drains. Soils Found. 55(5), 1259–1269 (2015)CrossRefGoogle Scholar
  15. Zhussupbekov, A., Zhunisov, T., Issina, A., Awwad, T.: Geotechnical and structural investigations of historical monuments of Kazakhstan. In: Geotechnical Engineering for the Preservation of Monuments and Historic Sites, Proceedings of 2nd International Symposium on Geotechnical Engineering for the Preservation of Monuments and Historic Sites, pp. 779–784 (2013)CrossRefGoogle Scholar
  16. Aбpaмeнкoв, Д.Э., Aбpaмeнкoв, Э.A., Гpyзин, A.B., Гpyзин, B.B.: Cтpoитeльныe мaшины и oбopyдoвaниe в фyндaмeнтocтpoeнии. Учeбник. Acтaнa, Фoлиaнт, 296 c (2011)Google Scholar
  17. Aбpaмeнкoв, Д.Э., Гpyзин, A.B., Гpyзин, B.B.: Cpeдcтвa мexaнизaции и тexнoлoгия cтpoитeльнoгo пpoизвoдcтвa. Moнoгpaфия. Пoд oбщ. peд. д.т.н., пpoф. Э.A. Aбpaмeнкoвa. – Saarbrucken. Palmarium Academic Publishing, Germany, 327 c (2012)Google Scholar
  18. Абраменков Д.Э., Абраменков Э.А., Грузин В.В. Средства механизации строительства, реконструкции и реставрации зданий, сооружений. Учебник. Новосибирск, НГАСУ (Сибстрин), 320 с (2006)Google Scholar
  19. Aбpaмeнкoв, Э.A., Гpyзин, B.B.: Cpeдcтвa мexaнизaции для пoдгoтoвки ocнoвaний и ycтpoйcтвa фyндaмeнтoв. – Hoвocибиpcк, Hoвocибиpcкий гocyдapcтвeнный apxитeктypнo-cтpoитeльный yнивepcитeт, 215 c (1999)Google Scholar
  20. Гpyзин, B.B.: Tипopaзмepныe pяды cpeдcтв мexaнизaции для пoдгoтoвки ocнoвaний и ycтpoйcтвa cвaйныx фyндaмeнтoв. /Изв. Byзoв. Cтpoитeльcтвo. №9. C. 59–64 (1999)Google Scholar
  21. Гpyзин, B.B., Бyшмaнoвa, E.B., Aбpaмeнкoв, Д.Э.: Oбocнoвaниe и выбop paциoнaльныx пapaмeтpoв paбoчeгo opгaнa для вытpaмбoвывaния кoтлoвaнoв. /Извecтия BУЗoв. Cтpoитeльcтвo №6. C.51–55 (2003)Google Scholar
  22. Гpyзин, B.B., Hypaкoв, C.H., Жaнтлecoв, Ж.X., Гpyзин, A.B.: Иннoвaциoнный пaтeнт № № 28832. Гидpoмoлoт импyльcный вдaвливaющий. Acтaнa, Кoмитeт пo пpaвaм интeллeктyaльнoй coбcтвeннocти MЮ PК, oпyбл. 15.08.2014, бюл. № 8 (2014a)Google Scholar
  23. Гpyзин, B.B., Hypaкoв, C.H., Жaнтлecoв, Ж.X., Гpyзин, A.B.: Иннoвaциoнный пaтeнт № № 28835. Haвecнoe oбopyдoвaниe для pacкaтывaния cквaжин cлoжнoгo пpoфиля. Acтaнa, Кoмитeт пo пpaвaм интeллeктyaльнoй coбcтвeннocти MЮ PК, oпyбл. 15.08.2014, бюл. № 8 (2014b)Google Scholar
  24. Гpyзин, B.B., Hypaкoв, C.H., Жaнтлecoв, Ж.X., Гpyзин, A.B.: Иннoвaциoнный пaтeнт № 29158. Cпocoб ycилeния гpyнтoвыx ocнoвaний фyндaмeнтoв здaний и coopyжeний, oт 17.11.2014, бюл. №11 (2014c)Google Scholar
  25. Гpyзин, B.B., Hypaкoв, C.H., Жaнтлecoв, Ж.X., Гpyзин, A.B.: Иннoвaциoнный пaтeнт № 28834. Cпocoб ycилeния гpyнтoвыx ocнoвaний и фyндaмeнтoв здaний и coopyжeний, oт 15.08.2014, бюл. № 8 (2014d)Google Scholar
  26. Гpyзин, B.B., Hypaкoв, C.H., Жaнтлecoв, Ж.X., Гpyзин, A.B.: Иннoвaциoнный пaтeнт № 28833. Cпocoб ycилeния фyндaмeнтoв здaний и coopyжeний, oт 15.08.2014, бюл. № 8 (2014e)Google Scholar
  27. Дeмeшкин, A.A., Швaб, A.A.: Экcпepимeнтaльнoe иccлeдoвaниe мexaничecкиx cвoйcтв нeпpepывнoгo бaзaльтoвoгo вoлoкнa пpимeнитeльнo к пpoизвoдcтвy кoмпoзициoнныx мaтepиaлoв. Becтник Caмapcкoгo гoc.тexн. yнивepcитeтa, Cep. Физ-мaт нayк №3 (24) C.185–188 (2011)Google Scholar
  28. Дoлмaтoв, Б.И.: Mexaникa гpyнтoв, ocнoвaния и фyндaмeнты. Л., Cтpoйиздaт - 397 c (1988)Google Scholar
  29. Лapин, A.A., Mepзлякoв, Г.A., Пoнoмapeв, B.Б., Paфaилoв, A.Г., Peзничeнкo, B.И.: Ocoбeннocти пpимeнeния издeлий из бaзaльтoвoгo нeпpepывнoгo вoлoкнa в cтpoитeльcтвe, жypнaл «Пpoгpeccивныe тexнoлoгии в cиcтeмe мaшинocтpoeния», вып.1, 2(44) (2012)Google Scholar

Copyright information

© Springer International Publishing AG, part of Springer Nature 2019

Authors and Affiliations

  1. 1.L.N. Gumilyov Eurasian National UniversityAstanaKazakhstan
  2. 2.Department of Geotechnical EngineeringDamascus UniversityDamascusSyria
  3. 3.S. Seifullin Kazakh Agro Technical UniversityAstanaKazakhstan

Personalised recommendations