Advertisement

Optimization Charge Scheme for Multi-row Ring Blasting Design Adopting Equilateral Triangle Layout Based on Modified Harries’ Mathematical Model from a Fragmentation Perspective: A Case Study

  • Mingzheng Wang
  • Xiuzhi Shi
  • Jian Zhou
Conference paper
Part of the Sustainable Civil Infrastructures book series (SUCI)

Abstract

To eliminate undesired phenomena such as brow damage and excessive fines owing to the energy concentration on the collar of the ring, a fragment simulation using a charge scheme optimization algorithm is proposed based on modified Harries model in this article. First, the traversal algorithm for an arrangement of regular holes (holes charged to the collar) is proposed based on the analysis of the current interval charge design method in ring blasting. Second, a new developed mathematical model based on Harries model is introduced to predict the fragment size of the column charge using the superposition method. Then, the optimization criteria based on the calculated blasted fragment matrix are discussed. Finally, a case study is introduced to illustrate the usage and optimization procedure of the program. Ten trial blastings were conducted in the Tonglvshan copper mine to verify the feasibility and effectiveness of the optimization algorithm. The findings reveal that the probability of brow damage was reduced efficiently.

Keywords

Ring blasting Charge scheme optimization Fragmentation matrix Harries’ mathematical model 

Notes

Acknowledgements

This research is partially supported by the National Key Research and Development Program (Grant No. 2017YFC0602902) of China, the Shenghua Lieying Program of Central South University (Principle Investigator: Dr. Jian Zhou), and the Fundamental Research Funds for the Central Universities of Central South University (Grant No. 2017zzts567).

References

  1. An, H.M., Liu, H.Y., Han, H., Zheng, X., Wang, X.G.: Hybrid finite-discrete element modelling of dynamic fracture and resultant fragment casting and muck-piling by rock blast. Comput. Geotech. 81, 322–345 (2017)CrossRefGoogle Scholar
  2. Blair, D.P.: Statistical models for ground vibration and airblast. Fragblast 3(4), 335–364 (1999)CrossRefGoogle Scholar
  3. Blair, D.P.: Non-linear superposition models of blast vibration. Int. J. Rock Mech. Min. Sci. 45(2), 235–247 (2008)CrossRefGoogle Scholar
  4. Blair, D.P.: Limitations of electronic delays for the control of blast vibration and fragmentation. In: Proceedings of the 9th International Symposium on Rock Fragmentation by Blasting, p. 171 (2009)Google Scholar
  5. Carter, C.: Blast design system. In: Third Large Open Pit Mining Conference, Parkille, Aust (1992)Google Scholar
  6. Cho, S.H., Ogata, Y., Kaneko, K.: Strain-rate dependency of the dynamic tensile strength of rock. Int. J. Rock Mech. Min. Sci. 40(5), 763–777 (2003)CrossRefGoogle Scholar
  7. Chung, S.H., Lee, N.H., Hunter, C.J.: A blast design analysis for optimizing productivity at INCO Ltd’s Thompson Open Pit. In: Proceeding of 17th Conference on Explosives and Blasting Techniques (1991)Google Scholar
  8. Darling, P.: SME Mining Engineering Handbook (Vol. 1). SME (2011)Google Scholar
  9. Hagan, T.N.: Optimizing the Yield and Distribution of Effective Explosion Energy in Fans and Rings of Blastholes. The AusIMM, Explosives in Mining Workshop, Melboume, Victoria (1987)Google Scholar
  10. Hardy, A.J., Ryan, T.M., Kemeny, J.M.: Block size distribution of in situ rock masses using digital image processing of drill core. Int. J. Rock Mech. Min. Sci. 34(2), 303–307 (1997)CrossRefGoogle Scholar
  11. Harries, G.: The modelling of long cylindrical charges of explosive. In: First International Symposium of Rock Fragmentation by Blasting, Lulea, Sweden (1983)Google Scholar
  12. Harries, G.: Development of a dynamic blasting simulation. In: 3rd International Symposium on Rock Fragmentation by Blasting, Brisbane, Australia (1990)Google Scholar
  13. Holmberg, R.: Design of tunnel perimeter blasthole patterns to prevent rock damage. In Proceeding of IMM Tunnelling’79 Conference, London, pp. 3–6 (1979)Google Scholar
  14. Hudson, J.A., Harrison, J.P.: Engineering Rock Mechanics: an Introduction to the Principles. Elsevier (2000)Google Scholar
  15. Igathinathane, C., Ulusoy, U.: Particle size distribution analysis of ground coal by machine vision ΣVolume approach. In: XXVI International Mineral Processing Congress (IMPC) Proceedings, New Delhi, India, pp. 24–28 (2012)Google Scholar
  16. Jimeno, E.L., Jimino, C.L., Carcedo, A.: Drilling and Blasting of Rocks. CRC Press (1995)Google Scholar
  17. Johansson, D., Ouchterlony, F.: Shock wave interactions in rock blasting: the use of short delays to improve fragmentation in model-scale. Rock Mech. Rock Eng. 46(1), 1–18 (2013)CrossRefGoogle Scholar
  18. Koupouli, N.J., Belem, T., Rivard, P., Effenguet, H.: Direct shear tests on cemented paste backfill–rock wall and cemented paste backfill–backfill interfaces. J. Rock Mech. Geotech. Eng. 8(4), 472–479 (2016)CrossRefGoogle Scholar
  19. Liu, J., Sun, P., Liu, F., Zhao, M.: Design and optimization for bench blast based on Voronoi diagram. Int. J. Rock Mech. Min. Sci. 66, 30–40 (2014)Google Scholar
  20. Margolin, L.G., Adams, T.F.: Numerical simulation of fracture. In: The 23rd US Symposium on Rock Mechanics (USRMS) (1982)Google Scholar
  21. Morin, M.A., Ficarazzo, F.: Monte Carlo simulation as a tool to predict blasting fragmentation based on the Kuz-Ram model. Comput. Geosci. 32(3), 352–359 (2006)CrossRefGoogle Scholar
  22. Saharan, M.R., Mitri, H.S., Jethwa, J.L.: Rock fracturing by explosive energy: review of state-of-the-art. Fragblast Int. J. Blasting Frag. 10, 1–2, 61–81 (2006)CrossRefGoogle Scholar
  23. Onederra, I.: A fragmentation modelling framework for underground ring blasting applications. Fragblast: Int. J. Blasting Frag. 8, 3, 177–200 (2004)CrossRefGoogle Scholar
  24. Onederra, I., Chitombo, G.: Design methodology for underground ring blasting. Min. Technol. 116(4), 180–195 (2007)CrossRefGoogle Scholar
  25. Palmström, A., Sharma, V.I., Saxena, K.: In-situ Characterization of Rocks. A. A. Balkema Publishers, pp. 1–40 (2001)Google Scholar
  26. Qu, S., Hao, S., Chen, G., Li, B., Bian, G.: The BLAST-CODE model—a computer-aided bench blast design and simulation system. Fragblast 6(1), 85–103 (2002)CrossRefGoogle Scholar
  27. Sanchidrián, J.A., Segarra, P., Ouchterlony, F., López, L.M.: On the accuracy of fragment size measurement by image analysis in combination with some distribution functions. Rock Mech. Rock Eng. 42(1), 95–116 (2009)CrossRefGoogle Scholar
  28. Schill, M., Sjöberg, J.: Finite element simulations of blasting and fragmentation with precise initiation. BLAST & IMPACT (2012)Google Scholar
  29. Scott, A., Onederra, I.A., Chitombo, G.P.: The suitability of conventional geological and geotechnical data for blast design. In: Fragblast 8, pp. 232–238. Editec SA (2006)Google Scholar
  30. Starfield, A.M., Pugliese, J.M.: Compression waves generated in rock by cylindrical explosive charges: a comparison between a computer model and field measurements. Int. J. Rock Mech. Min. Sci. Geomech. Abstr. (1968)Google Scholar
  31. Taylor, L.M., Chen, E.P., Kuszmaul, J.S.: Microcrack-induced damage accumulation in brittle rock under dynamic loading. Comput. Methods Appl. Mech. Eng. 55(3), 301–320 (1986)CrossRefGoogle Scholar
  32. Wang, Q.Z., Li, W., Song, X.L.: A method for testing dynamic tensile strength and elastic modulus of rock materials using SHPB. In: Rock Damage and Fluid Transport, Part I, pp. 1091–1100. Springer (2006)Google Scholar
  33. Wang, M.Z., Shi, X.Z., Zhou, J.: Optimization charge scheme for ring blasting design based on modified Harries’ mathematical model and superposition method from a fragmentation perspective: a case study of Tonglvshan copper mine, China. Int. J. Rock Mech. Min. Sci. [Submitted for publication] (2017)Google Scholar
  34. Yi, C., Johansson, D., Nyberg, U., Sjöberg, J.: Numerical simulation for the influence of delay time on the rock fragmentation. In: Proceedings of the 10th International Symposium on Rock Fragmentation by Blasting, Fragblast (2012)CrossRefGoogle Scholar
  35. Zhang, Q.B., Zhao, J.: A review of dynamic experimental techniques and mechanical behaviour of rock materials. Rock Mech. Rock Eng. 47(4), 1411–1478 (2014)CrossRefGoogle Scholar
  36. Zhang, Z.X.: Reducing eyebrow break caused by rock blasting in Malmberget mine. In: Proceedings of Thirty Seventh ISEE Annual Conference, SanDiego, USA, 6–9 Feb (2011)Google Scholar
  37. Zhang, Z.X.: Effect of double-primer placement on rock fracture and ore recovery. Int. J. Rock Mech. Min. Sci. 71, 208–216 (2014)Google Scholar
  38. Zhang, Z.X.: Rock Fracture and Blasting: theory and Applications. Butterworth-Heinemann (2016)CrossRefGoogle Scholar
  39. Zou, D.: Theory and Technology of Rock Excavation for Civil Engineering. Springer (2016)Google Scholar

Copyright information

© Springer International Publishing AG, part of Springer Nature 2019

Authors and Affiliations

  1. 1.School of Resources and Safety EngineeringCentral South UniversityChangshaChina

Personalised recommendations