Advertisement

Soil Reinforcement and Slope Stabilization Using Natural Jute Fibres

  • R. Ramkrishnan
  • V. Karthik
  • M. R. Sruthy
  • Animesh Sharma
Conference paper
Part of the Sustainable Civil Infrastructures book series (SUCI)

Abstract

This study is aimed at determining the effectiveness of random inclusion of jute fibres on the strength characteristics of two different clayey soils. Fibre length and percentage inclusion in soil mass were taken as the initial study parameters. Unconfined Compressive Strength (UCS) and California Bearing Ratio (CBR) tests were carried out to determine the strength parameters of the reinforced soil. Experimental results were then used to model the reinforced soil as embankment fills in finite element software programs PLAXIS 2D and SLIDE, to determine the safety factors. Results showed that the random distribution of jute fibres had positive effects on both strength parameters and the safety factors. The optimum fibre lengths and their respective percentage inclusions were then established. A mathematical expression, relating the UCS values to the fibre length and percentage inclusion was modelled from the experimental data using linear least square regression method in MATLAB. The data from the FEM software programs were compared with the mathematical expression, and it was observed that the expression held true for various strength parameter values, hence validating the expressions generated.

Keywords

Soil stabilization Soil reinforcement Natural fibers Jute FEM Regression 

References

  1. Ahmad, F., Bateni, F., Azmi, M.: Performance evaluation of silty sand reinforced with fibres. Geotext. Geomembr. 28(1), 93–99 (2010)CrossRefGoogle Scholar
  2. Bairagi, H., Yadav, R., Jain, R.: Effect of jute fibres on engineering properties of lime treated black cotton soil. Int. J. Eng. Res. Technol. 3(2), 1550–1552 (2014)Google Scholar
  3. Bhardwaj, D., Mandal, J.: Study on polypropylene fiber reinforced fly ash slopes. In: 12th International Conference on Computer Methods and Advances in Geomechanics, Curran Associates, Inc., Red Hook, NY, pp. 3778–3786 (2006)Google Scholar
  4. Binici, H., Aksogan, O., Shah, T.: Investigation of fibre reinforced mud brick as a building material. Constr. Build. Mater. 19(4), 313–318 (2005)CrossRefGoogle Scholar
  5. Bouhicha, M., Aouissi, F., Kenai, S.: Performance of composite soil reinforced with barley straw. Cement Concr. Compos. 27(5), 617–621 (2005)CrossRefGoogle Scholar
  6. Brinkgreve, R., Broere, W., Waterman, D.: PLAXIS 2D. Plaxis B.V, The Netherlands (2004)Google Scholar
  7. Estabragh, A., Bordbar, A., Javadi, A.: Mechanical behavior of a clay soil reinforced with nylon fibers. Geotech. Geol. Eng. 29(5), 899–908 (2011)CrossRefGoogle Scholar
  8. Ghavami, K., Toledo Filho, R., Barbosa, N.: Behaviour of composite soil reinforced with natural fibres. Cement Concr. Compos. 21(1), 39–48 (1999)CrossRefGoogle Scholar
  9. Hejazi, S., Sheikhzadeh, M., Abtahi, S., Zadhoush, A.: A simple review of soil reinforcement by using natural and synthetic fibers. Constr. Build. Mater. 30, 100–116 (2012)CrossRefGoogle Scholar
  10. Kumar, D., Dhane, G., Priyadarshee, A.: Performance of different form of soil reinforcement: a review. Int. J. Sci. Technol. Manage. 4(1), 667–677 (2015a)Google Scholar
  11. Kumar, D., Nigam, S., Nangia, A., Tiwari, S.: California bearing ratio variations in soil reinforced with natural fibres (a case study Bhopal Bypass Road). Int. J. Emerg. Technol. 6(2), 95–104 (2015b)Google Scholar
  12. Marandi, S., Bagheripou, M., Rahgozar, R., Zare, H.: Strength and ductility of randomly distributed palm fibers reinforced silty-sand soils. Am. J. Appl. Sci. 5(3), 209–220 (2008)CrossRefGoogle Scholar
  13. Mathew, A., Raneesh, K.: Effect of random inclusion of sisal fibre on strength behaviour of soil. Int. J. Sci. Res. 5(9), 1702–1707 (2016)Google Scholar
  14. MATLAB and Statistics Toolbox Release 2013b. The MathWorks, Inc., Natick, Massachusetts, United States (2013)Google Scholar
  15. Neeraja, D.: Influence of lime and plastic jute on strength and CBR characteristics of soft clayey (expansive) soil. Glob. J. Res. Eng. 10(1), 16–24 (2010)Google Scholar
  16. Park, T., Tan, S.: Enhanced performance of reinforced soil walls by the inclusion of short fiber. Geotext. Geomembr. 23(4), 348–361 (2005)CrossRefGoogle Scholar
  17. Prabakar, J., Sridhar, R.: Effect of random inclusion of sisal fibre on strength behaviour of soil. Constr. Build. Mater. 16(2), 123–131 (2002)CrossRefGoogle Scholar
  18. Prabakar, J., Dendorkar, N., Morchhale, R.: Influence of fly ash on strength behavior of typical soils. Constr. Build. Mater. 18(4), 263–267 (2004)CrossRefGoogle Scholar
  19. Ramkrishnan R., Sruthy M.R., Sharma, A., Karthik V.: Effect of random inclusion of sisal fibres on strength behavior and slope stability of fine grained soils. Mater. Today Proc. (in press)Google Scholar
  20. Ranjan, G., Vasan, R., Charan, H.: Probabilistic analysis of randomly distributed fiber-reinforced soil. J. Geotechn. Eng. 122(6), 419–426 (1996)CrossRefGoogle Scholar
  21. Ravishankar, A., Raghavan, K.: Coir stabilised lateritic soil for pavements. In: Indian Geotechnical Conference: Ground Engineering—Emerging Techniques (GREET), Indian Geotechnical Society, Warangal Chapter, Warangal, India, pp. 45–52 (2004)Google Scholar
  22. Sahu, Vaishali, Srivastava, Amit, Misra, Anil Kumar, Sharma, Anil Kumar: Stabilization of fly ash and lime sludge composites: assessment of its performance as base course material. Archiv. Civil Mech. Eng. 17(3), 475–485 (2017)CrossRefGoogle Scholar
  23. Sharma, A., Ramkrishnan, R.: Study on effect of microbial induced calcite precipitates on strength of fine grained soils. Perspect. Sci. 8, 198–202 (2016)CrossRefGoogle Scholar
  24. Singh, H., Bagra, M.: Improvement in CBR value of soil reinforced with jute fiber. Int. J. Innov. Res. Sci. Eng. Technol. 2(8), 3447–3452 (2013)Google Scholar
  25. Sivakumar Babu, G., Vasudevan, A.: Strength and stiffness response of coir fiber-reinforced tropical soil. J. Mater. Civ. Eng. 20(9), 571–577 (2008)CrossRefGoogle Scholar
  26. Sivakumar Babu, G., Vasudevan, A., Sayida, M.: Use of coir fibers for improving the engineering properties of expansive soils. J. Nat. Fibers 5(1), 61–75 (2008a)CrossRefGoogle Scholar
  27. Sivakumar Babu, G., Vasudevan, A., Haldar, S.: Numerical simulation of fiber-reinforced sand behavior. Geotext. Geomembr. 26(2), 181–188 (2008b)CrossRefGoogle Scholar
  28. Slide. Rocscience, Toronto, ON, Canada (2012)Google Scholar
  29. Tapas, D., Baleshwar, S.: Deformation and strength characteristics of jute geotextile reinforced soils. J. Environ. Res. Develop. 8(4), 987–995 (2014)Google Scholar
  30. Wu, Y., Li, Y., Niu, B.: Assessment of the mechanical properties of sisal fiber-reinforced silty clay using triaxial shear tests. Sci. World J. 2014, 1–9 (2014)Google Scholar

Copyright information

© Springer International Publishing AG, part of Springer Nature 2019

Authors and Affiliations

  • R. Ramkrishnan
    • 1
  • V. Karthik
    • 2
  • M. R. Sruthy
    • 3
  • Animesh Sharma
    • 4
  1. 1.Department of Civil Engineering, Amrita School of EngineeringAmrita Vishwa VidyapeethamCoimbatoreIndia
  2. 2.Department of Civil and Environmental EngineeringUniversity of California at BerkeleyBerkeleyUSA
  3. 3.Department of Civil Engineering, Faculty of Engineering and TechnologySRM UniversityKattankulathur, KancheepuramIndia
  4. 4.Afcons Infrastructure Ltd.West BengalIndia

Personalised recommendations