Advertisement

Contact of Rigid Rough Surface Through Polymer Coating Layer

  • P. Ogar
  • A. Kozhevnikov
  • V. Elsukov
Conference paper
Part of the Lecture Notes in Mechanical Engineering book series (LNME)

Abstract

The article is devoted to the analysis of engineering approaches to determining the value of the indentation of a spherical and rough surface into a polymer layer. It is pointed out that in most cases, the classical solutions of contact problems for bodies with varying mechanical characteristics do not allow the applied results to be applied for practical purposes to provide the specified conditions for friction, wear, and tightness. It is shown that engineering methods of solving contact problems on the basis of simplifying hypotheses are more practical, for example, the representation of a layered body as a construction with special mechanical properties that depend on the mechanical properties of base and coating materials and the thickness of the coating. The analysis of the use of the proposed engineering solutions in calculating the value of the indentation of the sphere showed the advantages of the method based on the rigid model of a layered body. In this case, the effective modulus of elasticity and the Poisson’s ratio are determined for any values of the coating thickness for an axisymmetric loading of a layered half-space. To determine the value of the indentation of a rough surface into the polymer layer, a discrete model of a rough surface is used. When contacting a rough surface through a polymer layer, it was taken into account that each asperity corresponds to a certain modulus of elasticity which is determined by the level of the peak and the value of approach.

Keywords

Polymeric coating Layered half-space Variable modulus of elasticity Spherical asperity Indentation of sphere Rough surface 

References

  1. 1.
    Golubev AI, Kondakov LA (1994) Handbook of seals and sealing equipment. In: Mechanical engineering, 2nd edn, MoscowGoogle Scholar
  2. 2.
    Belyj VA, Pinchuk LS (1980) Introduction to the materials science of sealing systems. Nauka-i-tekhnika, MinskGoogle Scholar
  3. 3.
    Bartenev GM, Lavrentiev VV (1972) Friction and wear of polymers. Chemistry, MoscowGoogle Scholar
  4. 4.
    Karmugin BV, Kisel VL, Lazebnik AG (1980) Modern designs of small pneumatic fittings. Tekhnika, KievGoogle Scholar
  5. 5.
    Avrushchenko BH (1978) Rubber seals. Chemistry, LeningradGoogle Scholar
  6. 6.
    Prodan VD (1991) The technique of sealing demountable fixed connections. In: Mechanical engineering, MoscowGoogle Scholar
  7. 7.
    Prodan VD (2012) Hermeyically sealed connections of equipment operated under pressure of the working medium. TGTU, TambovGoogle Scholar
  8. 8.
    Ogar PM, Sheremeta RN, Lkhanag D (2006) The tightness of the metal-polymeric joints of rough surfaces. BrSU, BratskGoogle Scholar
  9. 9.
    Makushkin AP (1993) Polymers in friction and seal assemblies at low temperatures. In: Mechanical engineering, MoscowGoogle Scholar
  10. 10.
    Torskaya EV (2014) Modeling of frictional interaction of bodies with coverings. Dissertation, MoscowGoogle Scholar
  11. 11.
    Aleksandrov VM, Mkhitaryan SM (1983) Contact problems for bodies with elastic coatings and interlayers. Nauka, MoscowGoogle Scholar
  12. 12.
    Aizikovich SM, Aleksandrov VM, Vasiliev AS, Krenev LI, Trubchik IS (2011) Analytic solutions of mixed axisymmetric problems for functional gradient media. Fizmatlit, MoscowGoogle Scholar
  13. 13.
    Potelezhko VP (2006) The Bousinescu problem for a two-layer half-space. Mechanics and physics of processes on the surface and in the contact of solid bodies and machine parts 2:27–32Google Scholar
  14. 14.
    Argatov II (2004) Approximate solution of an axisymmetric contact problem for an elastic layer of finite thickness. Probl Mech Eng Reliab Mach 6:35–40Google Scholar
  15. 15.
    Voronin NA (1993) Application of the theory of the elastic Hertz contact to the calculation of the stress-strain state of a layered elastic body. Friction Wear 14:250–258Google Scholar
  16. 16.
    Ogar PM, Tarasov VA, Fedorov IB (2013) Control of stiffness of contact systems of sealing joints modern technologies. Syst Anal. Model 1:22–27Google Scholar
  17. 17.
    Ogar PM, Tarasov VA (2013) Determination of the elastic characteristics of bodies with thin coatings. Adv Mater Res 677:267–272. www.scientific.net/AMR.677.267CrossRefGoogle Scholar
  18. 18.
    Ogar PM, Gorokhov DB, Kozhevnikov AS (2016) Effective modulus of elasticity of a layered body. Modern technologies. Syst Anal. Model 4(52):37–42Google Scholar
  19. 19.
    Kozhevnikov AS (2016) A new engineering solution for determining the effective modulus of elasticity of a layered body. In: Proceedings of the Bratsk State University. Series: natural and engineering sciences vol 2, pp 70–76Google Scholar
  20. 20.
    Ogar PM, Gorokhov DB, Kozhevnikov AS (2017) Contact problems in hermetology of fixed joints. BrSU, BratskGoogle Scholar

Copyright information

© Springer Nature Switzerland AG 2019

Authors and Affiliations

  1. 1.Bratsk State UniversityBratskRussia

Personalised recommendations