Advertisement

Longitudinal Fin Effect on Effectiveness of Double Pipe Heat Exchanger

  • Nail Farilovich Timerbaev
  • Omar Abdulhadi Mustafa Almohammed
  • Asaad Kamil Ali
Conference paper
Part of the Lecture Notes in Mechanical Engineering book series (LNME)

Abstract

In this study, the authors conducted mathematical simulation on the double pipe heat exchanger in which longitudinal fin with the dimension of (2 * 3 * 1000) mm supported on the outer surface of the inner tube. This paper contains the benefits of this design on heat transfer between fluids flowing through the system and at the same time its effect on the heat exchanger effectiveness, which helped us to select the optimum design. A consistent computer program (ANSYS Workbench 15.0) was used in this study to show the behavior of the fluids inside of a heat exchanger, and the results are also obtained by the program.

Keywords

Effectiveness Heat transfer Fin Heat exchanger Optimum design Pressure 

References

  1. 1.
    Shiva Kumar, Vasudev Karanth K, Krishna Murthy (2015) Numerical study of heat transfer in a finned double pipe heat exchanger. World J Modell Simul 11(1):43–54Google Scholar
  2. 2.
    Chen J, Müller-Steinhagen H, Duffy G (2001) Heat transfer enhancement in dimpled tubes. Appl Therm Eng 21(5):535–547CrossRefGoogle Scholar
  3. 3.
    Liao M, Xin D (2000) Augmentation of convective heat transfer inside tubes with 3-d internal extended surfaces & twisted tape inserts. Chem Eng 78(2):95–105CrossRefGoogle Scholar
  4. 4.
    Eiamsa S, Eiamsa P, Thianpong C (2009) Turbulent heat transfer enhancement by counter/co-swirling flow in a tube fitted with twin twisted tape. Exp Therm Fluid Sci 34(1):53–62CrossRefGoogle Scholar
  5. 5.
    Bhuiya M, Chowdhury M et al (2013) Heat transfer and friction factor characteristics in turbulent flow through a tube fitted with perforated twisted tape inserts. Int Commun Heat Mass Transf 46:49–57CrossRefGoogle Scholar
  6. 6.
    Borghese J, Compact heat exchanger design, characteristics, and trendsGoogle Scholar
  7. 7.
    Yunus AC, Heat transfer a practical approach, 2nd ednGoogle Scholar
  8. 8.
    Incropera FP, DeWitt DP, Bergman TL, Lavine AS, Fundamentals of heat and mass transfer, 6th edn, ch 11Google Scholar
  9. 9.
    Khan WA, Culham JR, Yovanovich MM (2006) Convection heat transfer from tube banks in crossflow: analytical approach. Int J Heat Mass Transf, 28 March 2006Google Scholar
  10. 10.
    Mehrabian MA (2007) Heat transfer and pressure drop characteristics of cross flow of air over a circular tube in isolation and or in a tube bank. Arab J Sci Eng 32(2B)Google Scholar
  11. 11.
    Zhang J-F, He Y-L, Tao W-Q (2009) 3D numerical simulation on shell-and-tube heat exchangers with middle-overlapped helical baffles and continuous baffles. Part I: numerical model and results of whole heat exchanger with middle-overlapped helical baffles. Int J Heat Mass Transf 52:5371–5380CrossRefGoogle Scholar
  12. 12.
    Guo J, Cheng L, Xu M (2009) Optimization design of shell-and-tube heat exchanger by entropy generation minimization and genetic algorithm. Appl Therm Eng 29:2954–2960CrossRefGoogle Scholar
  13. 13.
    Guo ZY, Liu XB, Tao WQ, Shah RK (2010) Effectiveness–thermal resistance method for heat exchanger design and analysis. Int J Heat Mass Transf 53:2877–2884CrossRefGoogle Scholar
  14. 14.
    Ravagnani MASS, Silva AP, Arroyo PA, Constantino AA (2005) Heat exchanger network synthesis and optimisation using genetic algorithm. Appl Therm Eng 25:1003–1017CrossRefGoogle Scholar
  15. 15.
    Caputo AC, Pelagagge PM, Salini P (2008) Heat exchanger design based on economic optimization. Appl Therm Eng 28:1151–1159CrossRefGoogle Scholar
  16. 16.
    Vlasogiannis P, Karagiannis G, Argyropoulos P, Bontozoglou V (2002) Air–water two-phase flow and heat transfer in a plate heat exchanger. Int J Multiph Flow 28:757–772CrossRefGoogle Scholar
  17. 17.
    Wang Y, Liu Z, Huang S (2011) Experimental investigation of shell-and-tube heat exchanger with a new type of baffles. Heat Mass Transf 47:833–839.  https://doi.org/10.1007/s00231-010-0590-xCrossRefGoogle Scholar
  18. 18.
    El-Baky MAA, Mohamed MM (2007) Heat pipe heat exchanger for heat recovery in air conditioning. Appl Therm Eng 27:795–801CrossRefGoogle Scholar
  19. 19.
    Rao RV, Patel VK (2010) Thermodynamic optimization of cross flow plate-fin heat exchanger using a particle swarm optimization algorithm. Int J Therm Sci 49:1712–1721CrossRefGoogle Scholar
  20. 20.
    Romero-Méndez R, Sen M, Yang KT, McClain R (2000) Effect of fin spacing on convection in a plate fin and tube heat exchanger. Int J Heat Mass Transf 43:39–51CrossRefGoogle Scholar

Copyright information

© Springer Nature Switzerland AG 2019

Authors and Affiliations

  • Nail Farilovich Timerbaev
    • 1
  • Omar Abdulhadi Mustafa Almohammed
    • 1
  • Asaad Kamil Ali
    • 2
  1. 1.Kazan State Power Engineering UniversityKazanRussia
  2. 2.Engineering College of Anbar UniversityRamadiIraq

Personalised recommendations