Advertisement

Iterative Process of AFEM and Ideal Failure Models of Structures

  • A. Ermakova
Conference paper
Part of the Lecture Notes in Mechanical Engineering book series (LNME)

Abstract

This paper considers the input of ideal failure models of structures for solution of algebraic set of equations by means of iterative process when Additional Finite Element Method (AFEM) is used. AFEM is a variant of the Finite Element Method (FEM) for nonlinear analysis of structures according to the forms of collapse. From the FEM point of view, this problem is the analysis of the structure with some nonlinear properties. The author of this paper suggested and worked out AFEM, which realizes such analysis due to rational iterative process for solving of the set of equations. After fulfillment of this main operation, the problem may be considered to be determined. The end and the direction of iterative process are defined under the condition of an ideal failure model, which is the design diagram of the structure at the moment preceding the collapse. Additional design diagrams and additional finite elements (AFEs) are used for introduction of some units of methods of Limit States (Ultimate Equilibrium) and Additional Loads (Elastic Decisions). This is necessary for creation of an iterative process according to the introduced criterion of collapse. The example of such iterative process is given in the paper.

Keywords

Iterative process Iteration Gauss elimination Method of additional loads Limit state method Additional finite element method Ideal failure model 

References

  1. 1.
    Ermakova AV (2007) Metod dopolnitel’nykh konechnykh elementov dlya rascheta zhelezobetonnykh konstruktsiy po predel’nym sostoyaniyam (Additional finite element method for analysis of reinforced concrete structures at limit states). ACV, MoscowGoogle Scholar
  2. 2.
    Ermakova AV (2012) Additional finite element method for analysis of reinforced concrete structures at limit states. ACV, MoscowGoogle Scholar
  3. 3.
    Ermakova AV (2016) Additional finite element method for analysis of reinforced concrete structures at limit states. ACV Construction, StockholmGoogle Scholar
  4. 4.
    Ermakova A (2016) Additional finite elements and additional loads for analysis of systems with several nonlinear properties. In: 2nd conference ICIE-2016 vol 150, pp 1877–1823CrossRefGoogle Scholar
  5. 5.
    Zienkiewicz OC (1975) Metod konechnykh elementov v tekhnike (The finite element method in technique). Mir, MoscowGoogle Scholar
  6. 6.
    Ilyushin AA (1948) Plastichnost’ (Plasticity). Gostechizdat, MoscowGoogle Scholar
  7. 7.
    Postnov VA (1977) Chislennye metody rascheta sudovykh konstruktsiy (Numerical methods of analysis of ship structures). Shipbuilding, LeningradGoogle Scholar
  8. 8.
    Gvozdev AA (1949) Raschet nesushchey sposobnosti konstruktsiy po metodu predel’nogo ravnovesiya (Analysis of bearing capacity of structures by limit state method). Stroyizdat, MoscowGoogle Scholar
  9. 9.
    Ermakova AV (2009) Actual problems of nonlinear design of reinforced concrete structures. Int J Comput Civ Struct Eng 5(1, 2):23–34Google Scholar
  10. 10.
    Ermakova A (2012) Solving some problems of nonlinear analysis of reinforced concrete structures by additional finite element method. In: Role for concrete in global development. Conference “Concrete in the low Carbon Era”, UK Scotland, Dundee, July 2012, pp 763–772Google Scholar
  11. 11.
    Ermakova A (2017) Ideal failure models of structures for analysis by FEM and AFEM. In: 3rd conference ICIE-2017 vol 206, pp 9–16Google Scholar
  12. 12.
    Ermakova A (2017) Ideal’nye modeli razrusheniya konstruktsiy dlya nelineynogo rascheta metodom dopolnitel’nykh konechnykh elementov (Ideal failure models of structures for nonlinear analysis by additional finite element method). Struct Mech Anal Constr 6:46–50Google Scholar
  13. 13.
    Ermakova A (2010) Osnovnaya razreshayushchaya sistema lineynykh algebraicheskikh uravneniy metoda dopolnitel’nykh konechnykh elementov (Main solving system of linear algebraic equations of additional finite element method). Struct Mech Anal Constr 4:74–78Google Scholar
  14. 14.
    Gorodestky AS, Evzerov ID (2007) Komp’yuternye modeli konstruktsiy (Computer models of structures). Fact, KievGoogle Scholar
  15. 15.
    Karpenko NI (1996) Obshchie modeli mekhaniki zhelezobetona (General mechanics models of reinforced concrete). Stroyizdat, MoscowGoogle Scholar
  16. 16.
    Shugaev VV (2001) Inzhenernye metody v nelineynoy teorii predel’nogo ravnovesiya obolochek (Engineering methods of nonlinear theory of limit equilibrium of the shells). Gothic, MoscowGoogle Scholar
  17. 17.
    Karyakin AA (1989) Chislennye metody resheniya zadach stroitel’stva na EVM (Numerical methods of solving of structural problems by computer). ChPI, ChelyabinskGoogle Scholar
  18. 18.
    Oatul AA, Chelyabinsk ChPI (eds) (1980) Raschet i proektirovanie elementov zhelezobetonnykh konstruktsiy na osnove primeneniya EVM (Computer-aided analysis of reinforced concrete structural elements) Part 4Google Scholar
  19. 19.
    Eurocode 2. Design of reinforced concrete structures. Part 1-1/ TKP EN 1992-1-1-2009 (02250)Google Scholar
  20. 20.
    Ermakova AV (2013) Osobennosti nelineynogo rascheta zhelezobetonnykh konstruktsiy po predel’nym sostoyaniyam MDKE (Singularities of AFEM realization of nonlinear analysis of reinforced concrete structures at limit states). Struct Mech Anal Constr 5:65–70Google Scholar
  21. 21.
    Ermakova AV (2016) Razvitie idey A.A. Il’yushina v metode dopolnitel’nykh konechnykh elementov (Development of A.A. Ilyushin’s ideas in additional finite element method). Struct Mech Anal Constr 3:56–63Google Scholar

Copyright information

© Springer Nature Switzerland AG 2019

Authors and Affiliations

  1. 1.South Ural State UniversityChelyabinskRussia

Personalised recommendations