Advertisement

Calculation of Kinematic Characteristics of Internal Combustion Engine Valve Gear

  • A. V. Vasilyev
  • Y. S. Bakhracheva
Conference paper
Part of the Lecture Notes in Mechanical Engineering book series (LNME)

Abstract

The technique of the Internal Combustion Engine (ICE) valve gear kinematic characteristics calculation in the case of numerical differentiation of tabular predetermined tappet movement law is submitted. The authors proposed and implemented a method of converting these characteristics when using the same Cam for different valve gear kinematic schemes. Based on the methods of calculation of the motion law of the follower, the authors obtained the characteristics of the timing and conversion of data during the transition from one kinematics to another developed  in a computer software, which is included in the software complex for synthesis of the characteristics of the valve timing. Their use allows one to identify resources for improving the timing mechanism of an internal combustion engine.

Keywords

Cam Valve gear Characteristics Tappet Kinematic scheme Differentiation Smoothing Interpolation 

References

  1. 1.
    Vasilyev A (2006) Simulation of valve gear dynamics using generalized dynamic model. Mechanika 2:37–43Google Scholar
  2. 2.
    Vasilyev A, Sidorov D (2008) Automobile engine valve train experimental research and dynamics simulation In: Compilation of articles of the international scientific-technical symposium “Auto NN 08: Automobile Transport in XXI Century” dedicated to the 45th anniversary of «Automobile Transport» Department of Nizhny Novgorod State Technical University n.a. R.E. Alekseev, Nizhny Novgorod, 18–19 Dec 2008Google Scholar
  3. 3.
    Korchemny LV (1981) Mehanizmgazoraspredelenijaavtomobil’nogo dvigatelja: Kinematikaidinamika (Valve gear of the automotive engine: kinematics and dynamics). Mechanical Engineering, MoscowGoogle Scholar
  4. 4.
    Kosugi T, Seino T (1985) Valve motion simulation method for high-speed internal combustion engines. SAE Technical Paper Series No. 850179, pp 1–10Google Scholar
  5. 5.
    Vasilyev A, Deynichenko E, Popov D (2005) Internal combustion engine valve gear cam wear and its influence on valve gear and engine efficiency. Mekhanika 54(4):44–49Google Scholar
  6. 6.
    Vasilyev AV, Bakhracheva YuS, Kabore O et al (2014) Valve cam design using numerical step-by-step method. Vestnik Volgogradskogo gosudarstvennogo universiteta. Seriya 10, Innovatsionnaya deyatelnost (Sci J Volgogr State Univ Innov Act) 10:26–32Google Scholar
  7. 7.
    Vasilyev AV, Bakhracheva YS, Storojakov SY (2016) Dynamics simulation model for the internal combustion engine valve gear. Procedia Eng. In: 2nd international conference on industrial engineering, ICIE 2016, pp 312–317.  https://doi.org/10.1016/j.proeng.2016.07.017CrossRefGoogle Scholar
  8. 8.
    Bakhracheva JuS (2013) Fracture toughness prediction by means of indentation test. Int J Comput Civ Struct Eng 9:21–24Google Scholar
  9. 9.
    Baron A, Bakhracheva J (2007) A method for impact strength estimation. Mechanika 66:31–35Google Scholar
  10. 10.
    Bakhracheva YuS (2014) The method for lifetime estimation through the mechanical properties in tension. Sci J Volgogr State Univ Technol Innov 11:27–32.  https://doi.org/10.15688/jvolsu10.2014.2.4CrossRefGoogle Scholar
  11. 11.
    Baron A, Bakhracheva J, Osipenko A (2007) Fracture toughness estimation by means of indentation test. Mechanika 67:33–36Google Scholar
  12. 12.
    Vasilyev A, Dolgov K (2007) The arrangement scheme and its influence on vibration process of the vehicle piston engine. Mechanika 66:44–48Google Scholar

Copyright information

© Springer Nature Switzerland AG 2019

Authors and Affiliations

  1. 1.Volgograd State Technical UniversityVolgogradRussian Federation
  2. 2.Volgograd State UniversityVolgogradRussian Federation

Personalised recommendations