Control of Damping Process in System of Vibration Isolation

  • V. ChernyshevEmail author
  • O. Fominova
Conference paper
Part of the Lecture Notes in Mechanical Engineering book series (LNME)


The results of solving the problem of finding the optimal synthesizing control function of the damping process in the vibration isolation system are given. It is established that the optimal control determines the intermittent damping process. The damper is activated when the sign of the object’s speed changes and is switched off when the object’s displacement sign is changed. The results of the simulation of dynamic processes in a controlled system of vibration isolation indicate that intermittent damping eliminates resonant phenomena and provides a monotonic decrease in the dynamic coefficients with increasing frequency of power disturbance. In this case, the transient processes decay within the same period of forced oscillations.


Vibration isolation system Control Intermittent damping Optimization Dynamics Simulation 



The work was supported by the Russian Science Foundation for Project No. 16-19-00186.


  1. 1.
    Mindrin VI, Pachurin GV, Rebrushkin MN (2015) Types and causes of vibration of power machines. Mod High Technol 5:32–36Google Scholar
  2. 2.
    Heimann B, Gert V, Popp K, Repetsky O (2010) Mechatronics: components, methods, examples. SB RAS, NovosibirskGoogle Scholar
  3. 3.
    Abramov KV, Mikhlin YuV (2015) Nonlinear dynamics of elastic systems, vol 2. Institute of Computer Research, IzhevskGoogle Scholar
  4. 4.
    Ivovich VA, Onishchenko VYa (1990) Protection against vibration in mechanical engineering. Mechanical Engineering, MoscowGoogle Scholar
  5. 5.
    Vibration in technology: handbook (1981) In: Frolova KV (ed) Volume 6. Protection from vibration and shock. Mechanical Engineering, MoscowGoogle Scholar
  6. 6.
    Chernyshev VI, Savin LA, Fominova OV (2016) Rotary dynamics: gyroscopic effects and control. Fundam Appl Probl Tech Technol 5:3–8Google Scholar
  7. 7.
    Chernyshev VI, Mayorov SV, Fominova OV (2017) Development of a model of a controlled rotor system. Fundam Appl Probl Tech Technol 6:128–136Google Scholar
  8. 8.
    Pugachev AO, Savin LA, Solomin OV (2006) Dynamics of acceleration of the rotor on bearings of liquid friction. Proc High Sch Mech Eng 4:11–20Google Scholar
  9. 9.
    Savin LA, Solomin OV (2006) Modeling of rotor systems with bearings of liquid friction. Mechanical Engineering-1, MoscowGoogle Scholar
  10. 10.
    Goldin AS (2000) Vibration of rotary machines. Mechanical Engineering, MoscowGoogle Scholar
  11. 11.
    Chernyshev VI, Fominova OV, Belozerova EB (2012) Vibration isolation system with controlled damper. Directory. Eng J 6:3–10Google Scholar
  12. 12.
    Chernyshev VI, Fominova OV, Belozerova EB (2012) Controlled vibration isolation of an object with two degrees of freedom. World Transp Technol Mach 1:79–87Google Scholar
  13. 13.
    Chernyshev VI, Fominova OV, Belozerova EB (2012) Simulation of the vibration isolator with intermittent damper. Fundam Appl Probl Tech Technol 2:30–36Google Scholar
  14. 14.
    Fominova OV (2005) Intermittent damping in vibration and vibration systems: the basics of theory, applications. Mechanical Engineering-1, MoscowGoogle Scholar
  15. 15.
    Chernyshev VI (1993) The manifestation of a local effect in the method of dynamic programming and the optimal control of vibration protection systems. Proc High Sch Instrum Mak 5:55–59Google Scholar
  16. 16.
    Fominova OV, Savin LA, Chernyshev VI (2013) Theoretical aspects of the formation of optimal controlled vibration protection processes. Izv South-West State Univ Ser Tech Technol 3:44–50Google Scholar
  17. 17.
    Fominova OV, Stepanov YuS, Chernyshev VI (2011) Extreme problems and optimization: introduction to the theory of indirect pulse control of oscillation processes. “Spectrum” Publishing House, MoscowGoogle Scholar
  18. 18.
    Troitsky VA (1976) Optimal processes of oscillations of mechanical systems. Mechanical Engineering, LeningradGoogle Scholar
  19. 19.
    Dykhta VA, Samsonyuk ON (2003) Optimal impulse control with applications. Fizmatlit, MoscowzbMATHGoogle Scholar
  20. 20.
    Panteleev AV, Bortakovskiy AS (2003) Control theory in examples and problems. High School, MoscowGoogle Scholar
  21. 21.
    Dyakonov VP (2001) MATHCAD 8/2000: special reference book. Peter, St. PetersburgGoogle Scholar
  22. 22.
    Ivanovsky RI (2003) Computer technologies in science and education. Practice of application of Mathcad Pro systems. High School, MoscowGoogle Scholar

Copyright information

© Springer Nature Switzerland AG 2019

Authors and Affiliations

  1. 1.Orel State University named after I. S. TurgenevOrelRussia

Personalised recommendations