Design of the Inductor as Knot of the Electromechanical Converter with a Secondary Discrete Part

  • D. N. KuimovEmail author
  • A. V. Pavlenko
Conference paper
Part of the Lecture Notes in Mechanical Engineering book series (LNME)


The new approach to design and research of the electromechanical converter with a secondary discrete part based on the analysis of the movement of a secondary discrete part is offered. The configuration is defined and optimizing calculation of the inductor of the electromechanical converter with a secondary discrete part is executed. As a method of optimization, the stochastic method of random variables of Monte Carlo has been used. Optimization is executed in two stages with the application of a software package of FEMM 4.2. As a result of optimization, the geometrical sizes of a tooth zone of the inductor of the device are received. The research of change of the electromagnetic effort operating on a single ferromagnetic element in the working camera at the change of geometry of a tooth zone is conducted. The geometrical sizes of elements of a tooth zone of the inductor providing the best conditions of movement of a secondary discrete part on the volume of the working camera are determined.


Electromechanical converter Vortex layer Ferromagnetic element Discrete part Secondary part Electromagnetic effort Monte Carlo 


  1. 1.
    Kirbyatyeva TV, Kortovenko LP et al (2013) A research of influence of processing in devices of a vortex layer on quality of ready paints and varnishes. Scientific capacity of regions on service of modernization, pp 17–20Google Scholar
  2. 2.
    Volodin GI (2009) Electromagnetic processes in devices with any mobile part. Dissertation, South-Russian State Polytechnic UniversityGoogle Scholar
  3. 3.
    Volodin GI, Bakhvalov AYu (2013) Synthesis of the inductor of the rotating magnetic field of the activator with a vortex layer for processing of sewage. II—I am the International scientific and practical Ecology conference: education, science, industry and health, pp 40–43Google Scholar
  4. 4.
    Bakhvalov AYu (2008) Electromechanical devices with a discrete secondary part: analysis algorithms and synthesis and advanced designs. Dissertation, South-Russian State Polytechnic UniversityGoogle Scholar
  5. 5.
    Kuimov DN, Minkin MS (2016) Low-sulfur fuel and oil production. Materials Science Forum, pp 671–676CrossRefGoogle Scholar
  6. 6.
    Minkin MS, Kuimov DN et al (2016) Electromechanical activation of oil and oil residues in devices of a vortex layer. Collection of works XII of the international scientific and technical conference. Dynamics of technical systems, pp 392–396Google Scholar
  7. 7.
    Kuimov DN, Minkin MS (2017) The electromechanical converter in the systems of desulfurisation of crude oil. In: Abbasian NT, Sevostianov I, Yeghiazaryan K, Nguyen DA, Mladenovic V (eds) MATEC Web of ConferencesGoogle Scholar
  8. 8.
    Kuimov DN, Pavlenko AV et al (2017) The electromechanical transducer with a secondary discrete part of the processing system of oil and oil products. News of higher educational institutions. Electromechanics 60(5):39–46Google Scholar
  9. 9.
    Kuimov DN (2016) The motion estimation of the secondary discrete parts in electromechanical actuators of a vortex layer. News of Higher Educational Institutions. Electromechanics 5(547): 11–15Google Scholar
  10. 10.
    Vershinin NP (2007) Process activating unit. WO Patent 2007114731Google Scholar
  11. 11.
    Popov EA (2004) The induction device for hashing and crushing of liquid and loose environments. RU Patent 53933, 10 June 2004Google Scholar
  12. 12.
    Meeker D (2008) Finite element method magnetics. Version 4:2Google Scholar
  13. 13.
    Klimov EA (2012) Evaluation of the effect of zero sequence components on the efficiency of the Electromechanical activator (apparatus with a vortex layer). Izvestiya vuzov. Electromechanics 1:67–72Google Scholar
  14. 14.
    Petrushin AD (2016) Optimization of an active part of the ventilno-inductor electric drive RGUPS Bulletin, pp 61–65Google Scholar
  15. 15.
    Shevkunova AV (2016) The choice of optimization method for subcool zone switched-reluctance motor. Modern science: problems and prospects 3–2:248–251Google Scholar
  16. 16.
    Kashuba VA (2016) Improvement of operational characteristics of the traction motor of the switched-reluctance type. Proceedings of Rostov state University of Railway Engineering 3:62–83Google Scholar
  17. 17.
    Klochkova NN (2010) Study of the effect of clearance between the induction heating of solids of revolution complex forms Vestnik of Samara state technical University. Series: Technical Sciences, 2:161–165Google Scholar
  18. 18.
    Petrushin AD (2017) Optimization calculation and experimental research of switched-reluctance-machines. Internet-journal Science of Science, 9(2):1–10Google Scholar
  19. 19.
    Shevkunov VA (2016) Design of switched-reluctance motor as a hub in the system variable speed drive with the use of optimization algorithms. Internet-journal Science of Science, 8(4):1–13Google Scholar
  20. 20.
    Volodin GI, Bakhvalov AU et al (2014) The synthesis of the geometry of the perforated layer of the inductor of a linear induction motor. Bulletin of all-Russian Scientific Research and Design Institute of Electric Locomotive Engineering 1(67):38–43Google Scholar

Copyright information

© Springer Nature Switzerland AG 2019

Authors and Affiliations

  1. 1.Don State Technical UniversityRostov-on-DonRussian Federation
  2. 2.Platov South-Russian State Polytechnic University (NPI)NovocherkasskRussian Federation

Personalised recommendations