Advertisement

Method and Means for Shutting Off Individual Cyclic Feeds of ICE and Their Use for Measuring ICE Speed and Load Characteristics

  • A. M. Plaksin
  • Z. V. Almetova
  • A. E. Popov
Conference paper
Part of the Lecture Notes in Mechanical Engineering book series (LNME)

Abstract

In large metropolises, the dominant share of environmental pollution is caused by automobile transport. In this connection, Euro-5 and Euro-6 environmental standards were affected in many countries. These standards require the use of technological innovations leading to significant reductions in harmful emissions and fuel consumption. At the same time, internal combustion engines using gasoline and gas fuel are actively used. Significant reduction in toxicity can be achieved by switching off fuel supply and the valve mechanism, as well as additional loading of the remaining cylinders with the power of mechanical losses of the cylinders, which are cut out. To achieve the research objective, which is to develop a method for measuring the engine speed and load characteristics, we designed a device—a gasoline engine loader (DBD-3) also being a full-time electronic ICE control unit. DBD-3 implements the technique of a full and partial cylinder cutout impacting the impulses of electromagnetic injectors and high-voltage circuits of the ignition system. In addition, several algorithms for performing tests and adjusting modes for the purpose of the ICE system adaptability are incorporated in the DBD-3 functions. These developments can be used to measure the ICE speed and load characteristics, as they allow achieving a high accuracy in setting the load effects, their smoothness, technological sophistication of all the methods and modes. In the future, the developed diagnostic means can be used as a built-in diagnostic tool and recommended for a wide use in the automotive industry.

Keywords

Engine Fuel supply system Cylinder cutout Engine speed Fuel consumption Environmental friendliness Economy 

Notes

Acknowledgements

The work was supported by Act 211 Government of the Russian Federation, contract № 02.A03.21.0011.

References

  1. 1.
    Yasmeen MI, Khan T et al (2016) Research progress in the development of natural gas as fuel for road vehicles. Renew Sustain Energy Rev 66:702–741.  https://doi.org/10.1016/j.rser.2016.08CrossRefGoogle Scholar
  2. 2.
    Milkins EE, Allen RG, Edsell VD (1990) Gaseous fuel injection system for the operation of heavy duty engines on natural gas. In: Proceedings—Society of Automotive Engineers, pp 203–209Google Scholar
  3. 3.
    Eck C, Konigorski U, Cianflone F et al (2011) Fault detection system for the air path of common rail diesel engines with low pressure EGR. SAE Technical PapersGoogle Scholar
  4. 4.
    Kimmich F, Isermann R (2002) Model based fault detection for the injection, combustion and engine-transmission. IFAC Proceedings 15(1):203–208CrossRefGoogle Scholar
  5. 5.
    Erokhov VI, Murachev EG, Revonchenkov AM (2009) Mathematical model and control algorithm for gas-driven ICE. In: Materials of the international scientific symposium “Autotractor-building-2009”, vol 2, pp 75–77Google Scholar
  6. 6.
    Zlotin GN, Zakharov EA, Kuzmin AV (2007) Adjustment of the gasoline engine for its transfer to liquefied petroleum gas. Drive Eng 2:29–31Google Scholar
  7. 7.
    Dmitrievsky AV, Shatrov EV (1985) Fuel economy of gasoline engines. Mechanical Engineering, MoscowGoogle Scholar
  8. 8.
    Gas analyzers. Access mode: http://car-test.ru/product_543.html#
  9. 9.
    Hajari SC (1996) Diagnosis and repair of excessively emitting vehicles. J Air Waste Manag Assoc 46(10):940–952.  https://doi.org/10.1080/10473289.1996.10467529CrossRefGoogle Scholar
  10. 10.
    Gurgenci H, Aminossadati SM (2009) Investigating the use of methane as diesel fuel in off-road haul road truck operations. J Energy Resour Technol 131(3).  https://doi.org/10.1115/1.3185350CrossRefGoogle Scholar
  11. 11.
    Pasechnik DV (2004) Gas fuel supply system for injection engines ZMZ. J Autom Ind 5:12–15Google Scholar
  12. 12.
    Gritsenko AV, Plaksin AM, Shepelev VD (2017) Studuing lubrication system of turbocompressor rotor with integrated electronic control. Procedia Eng 206:611–616CrossRefGoogle Scholar
  13. 13.
    Evans-Pughe C (2006) Learning to drive [tightening emissions regulations]. Eng Technol 1(2):42–45.  https://doi.org/10.1049/et:20060205CrossRefGoogle Scholar
  14. 14.
    Shishkov VA (2011) Algorithm for diagnostics of HBO elements in the electronic control system of ICE with spark ignition. AvtogazoZapravochny complex + alternative fuel. Int Sci Tech J 1:7–15Google Scholar
  15. 15.
    Gritsenko A, Kukov S, Glemba K (2016) Theoretical underpinning of diagnosing the cylinder group during motoring. Procedia Eng 150:1182–1187CrossRefGoogle Scholar
  16. 16.
    Gritsenko A, Plaksin A, Glemba K (2016) Experimental studies of cylinder group state during motoring. Procedia Eng 150:1188–1191CrossRefGoogle Scholar
  17. 17.
    Gonçalves M, Jiménez-Guerrero P, Baldasano JM (2009) Emissions variation in urban areas resulting from the introduction of natural gas vehicles: Application to Barcelona and Madrid greater areas (Spain). Sci Total Environ 407(10):3269–3281.  https://doi.org/10.1016/j.scitotenv.2009.01.039CrossRefGoogle Scholar
  18. 18.
    Gumus M, Ugurlu A (2011) Application of phase change materials to pre-heating of evaporator and pressure regulator of a gaseous sequential injection system. Appl Energy 88(12):4803–4810.  https://doi.org/10.1016/j.apenergy.2011.06.053CrossRefGoogle Scholar
  19. 19.
    Gritsenko AV (2014) Development of test methods for diagnosing the operability of power systems and lubrication of internal combustion engines (experimental and production implementation using the example of internal combustion engines). Dissertation, South Ural State Agrarian UniversityGoogle Scholar
  20. 20.
    Karavalakis G, Short D, Russell RL et al (2014) Assessing the impacts of ethanol and isobutanol on gaseous and particulate emissions from flexible fuel vehicles. Environ Sci Technol 48(23):14016–14024.  https://doi.org/10.1021/es5034316CrossRefGoogle Scholar
  21. 21.
    NTS (2012) Manuals: computer complex MOTOR-Tester MT10КM with software MT10 and block of automobile diagnostics AMД-4AКM. LLC “Scientific and Production Enterprise”. NTS, SamaraGoogle Scholar
  22. 22.
    Stein RA, Anderson JE, Wallington TJ (2013) An overview of the effects of ethanol-gasoline blends on SI engine performance, fuel efficiency, and emissions. SAE Int J Engines 6(1):470–487.  https://doi.org/10.4271/2013-01-1635CrossRefGoogle Scholar

Copyright information

© Springer Nature Switzerland AG 2019

Authors and Affiliations

  1. 1.South Ural State Agrarian UniversityChelyabinskRussia
  2. 2.South Ural State UniversityChelyabinskRussia

Personalised recommendations