Practice of Dimensional Modeling of Assembly Operations Using Static Compensators

  • M. G. Galkin
  • A. S. SmaginEmail author
Conference paper
Part of the Lecture Notes in Mechanical Engineering book series (LNME)


The paper presents a process of dimensional couplings modeling in assembly operations using single-circuit graph models, describing the mechanism of individual components mating. The method of incomplete interchangeability is used for the description as being the most common in the current manufacturing conditions. The authors consider the calculations based on the defined mathematical model, which can be applied to single-circuit and multi-circuit dimensional schemes in various manufacturing conditions. For mass production, an algorithm is proposed to determine the scattered field of upper and lower limits of adjusting gaskets. The calculation method is demonstrated using specific examples describing extreme events of interaction between the dimension chains of parts in the assembling department. With that, the nominal controller link is viewed as having a positive reduction ratio.


Dimensional modeling Single-circuit graph model Scattered field of master link Dimension chains Control method Static compensator Controller link 


  1. 1.
    Myagkov V (ed) (1983) Dopuski i posadki (Tolerances and landing). In 2 pt. Pt. 2. Mashinostroenie, Leningrad, pp 545–1032Google Scholar
  2. 2.
    Iakushev A (1986) Vzaimozamenyaemost, standartizatsiya i tekhnicheskie izmereniya (Interchangeability, standardization and technical measurements). Mashinostroenie, Moscow, p 352Google Scholar
  3. 3.
    Bazrov B (1984) Raschet tochnosti mashin na EVM (Accuracy calculation on computers). Mashinostroenie, Moscow, p 256Google Scholar
  4. 4.
    Ashikhmin V, Zakuraev V (2005) Razmernyy analiz pri tekhnologicheskom proektirovanii (Dimensional analysis in design process). Yekaterinburg, UGTU-UPI, p 93Google Scholar
  5. 5.
    Dunaev P, Lelikov O (2000) Konstruirovanie uzlov i detaley mashin (Construction of units and machine parts). Vysshaya shkola, Moscow, p 496Google Scholar
  6. 6.
    Beyzelman R, Tsypkin B, Perel L (1975) Podshipniki kacheniya (Roller bearings): handbook (Spravochnik). Mashinostroenie, Moscow, p 574Google Scholar
  7. 7.
    Timiryazev V (ed) (2012) Osnovy tekhnologii mashinostroitelnogo proizvodstva (Basic technology of machine-building production), Lan, Saint-Petersburg, p 448Google Scholar
  8. 8.
    Markov N (1992) Normirovanie tochnosti v mashinostroenii (Rationing precision in engineering). Stankin Publi sher, Moscow, p 320Google Scholar
  9. 9.
    Matalina A (2008) Tekhnologiya mashinostroeniya (Engineering technology). Saint-Petersburg, Lan, p 512Google Scholar
  10. 10.
    Paley M, Romanov A, Braginskiy V (2009) Dopuski i posadki (Tolerances and landing): Handbook (Spravochnik). In 2 pt. Pt. 2. Politekhnika, Saint-Petersburg, p 629Google Scholar
  11. 11.
    Anukhin V (2004) Dopuski i posadki (Tolerances and landing). Saint-Petersburg, Piter, p 207Google Scholar

Copyright information

© Springer Nature Switzerland AG 2019

Authors and Affiliations

  1. 1.Ural Federal UniversityYekaterinburgRussia

Personalised recommendations