Advertisement

System Approach and Multivariance of Screw Surface Profiling

  • S. D. Smetanin
  • V. G. Shalamov
Conference paper
Part of the Lecture Notes in Mechanical Engineering book series (LNME)

Abstract

The article demonstrates the urgency of the problem of screw surface profiling and the drawbacks of the existing profiling methods. It justifies the applicability of the system approach to the problem of screw surface profiling. The main types of structural elements, types, and the purpose of their parameters are identified on the basis of the system approach. This allowed one to identify the reasons for the emerging multivariance of solving the profiling problems, which is determined both by the interrelationship of structural elements and the variability by their initial parameters, and by the need to ensure conditions for a correct shaping of screw surfaces. The article identifies the possible types of screw surface profiling problems which are called tool, control, adjustment, and combined. It shows the role of each problem in practical use. The classification of profiling problems allows one to predict the development of profiling methods and reflects the development of the theory of screw surface shaping.

Keywords

System approach Screw surface Shaping Profiling 

References

  1. 1.
    Rodin PR (1990) Basics of designing cutting tools: textbook. Higher School, Kiev, p 424Google Scholar
  2. 2.
    Lashnev SI, Yulikov MI (1980) Computer-based design of the tool cutting part. Mashinostroenie (Mechanical Engineering), Moscow, p 208Google Scholar
  3. 3.
    Lyukshin VS (1968) Theory of screw surfaces in the design of cutting tools. Mashinostroenie (Mechanical Engineering), Moscow, p 372Google Scholar
  4. 4.
    Borisov AN (1993) Geometric theory of designing cutting tools. Dissertation, Tula, 284 pGoogle Scholar
  5. 5.
    Grechishnikov VA (1978) Design of a disk tool for processing screw surfaces. Mashinostroitel (Mechanical Engineer) 10:16–17Google Scholar
  6. 6.
    Kolesov NV (1997) Graph-analytical model of complex screw surfaces. STIN 6:23–24Google Scholar
  7. 7.
    Chemborisov NA (2003) Profiling of a shaped cutter for processing a screw surface. STIN 4:18–20Google Scholar
  8. 8.
    Ilyukhin SY (2002) Frame-kinematic method to model the disk tool shaping of surfaces of machine parts. Dissertation, Tula, 390 pGoogle Scholar
  9. 9.
    Yulikov MI (1987) Design and manufacture of cutting tools. Mashinostroenie (Mechanical Engineering), Moscow, p 296Google Scholar
  10. 10.
    Yakubovich YV (1977) Study of the process of screw surface shaping by the disk tool and optimization of its setting parameters in the automated design engineering. Dissertation, Minsk, 199 pGoogle Scholar
  11. 11.
    Yascheritsin PI (1981) Fundamentals of cutting materials and cutting tools. Higher School, Minsk, p 560Google Scholar
  12. 12.
    Schegolkov NN (1995) Modeling the product profile at computer profiling of the machining tool. STIN 2:18–23Google Scholar
  13. 13.
    Panchuk KL (1979) Kinematic method of profiling disc instruments. University News. Mashinostroenie (Mechanical Engineering) 11:125–129Google Scholar
  14. 14.
    Rodin PR (1979) Metal-cutting tools: university textbook, 2-nd enlarged and corrected ed. Higher School, Kiev, 432 pGoogle Scholar
  15. 15.
    Kirsanov GN (1978) Development of some questions of the tool theory. Bull Mach Build 9:53–58Google Scholar
  16. 16.
    Radzevich SP (2001) Shaping the surfaces of parts. Fundamentals of the theory. Monograph. Rastan, Kiev, 592 pGoogle Scholar
  17. 17.
    Petukhov YE (2004) Designing tools for machining of parts with a shaped screw surface at the operation analysis stage Dissertation, Moscow, 393 pGoogle Scholar
  18. 18.
    Gavrilov YV (1975) Analytical study of the screw groove shaping by disk tools Dissertation, Chelyabinsk, 158 pGoogle Scholar
  19. 19.
    Shalamov VG, Gasnikova TV, Yankovaya OV (2003) Using a standardized tool for milling screw surfaces. Progressive technologies in engineering: collection of scientific works. SUSU Publishing House, Chelyabinsk, pp 14–17Google Scholar
  20. 20.
    Manual on the course design of metal cutting tools: university textbook on the specialty “Technology of machine building, metal-cutting machines and tools” (1986). In: Kirsanov GN (ed). Mashinostroenie (Mechanical Engineering), Moscow, 288 pGoogle Scholar
  21. 21.
    Shalamov VG (2009) Shaping conditions at screw surface profiling with a disk tool. Technol Mech Eng 6:11–14Google Scholar

Copyright information

© Springer Nature Switzerland AG 2019

Authors and Affiliations

  1. 1.South Ural State UniversityChelyabinskRussia

Personalised recommendations