Methodics of Quality of Hydroabrasive Waterjet Cutting Machinability Assessment

  • G. Barsukov
  • T. Zhuravleva
  • O. KozhusEmail author
Conference paper
Part of the Lecture Notes in Mechanical Engineering book series (LNME)


The occurrence of delamination and value of stratification at drifting by hydroabrasive waterjet are influenced by the number of factors including “unmanageable” and “accidental”. In view of the above, the necessity to develop the method of glass fiber plastic machinability assessment is arising. This method includes not only recommendations about the choice of the technological modes (the “controllable” factors), but also the influence of “unmanageable” factors on the drifting process is also considered for obtaining a required processing quality.


Abrasive waterjet Machinability criterion Machinability Laminated materials Cutting of many details Hole drilling 


  1. 1.
    Tikhomirov RA, Petukhov EN, Babanin VF, Starikov ID, Kovalev VA (1992) High-pressure jetcutting. Mechanical EngineeringGoogle Scholar
  2. 2.
    Anisimov R, Tarapanov A, Kanatnikov N (2017) Complex analysis of edge cutting machining of periodic profiles. Procedia Eng 206:1452–1457CrossRefGoogle Scholar
  3. 3.
    Kanatnikov N, Kanatnikova P, Vlasov V (2017) Tool design influence on the thermal effects appearing during bevel gear processing. Procedia Eng 206:1342–1347CrossRefGoogle Scholar
  4. 4.
    Ansari AI, Hashish M (1995) Effect of abrasive waterjet parameters on volume removal trends in turning. J Eng IndGoogle Scholar
  5. 5.
    Tikhomirov RA (1997) Waterjet cutting: process and equipment. Russ Eng ResGoogle Scholar
  6. 6.
    Stepanov YuS, Barsukov GV, Bishutin SG (2016) Technological fundamentals for efficiency control of hydroabrasive cutting. In: 2nd international conference on industrial engineering (ICIE-2016). Procedia Eng 150:717–725CrossRefGoogle Scholar
  7. 7.
    Bach F-W, Louis H, Versemann R, Schenk A (2006) Characterization of a pure water-jet cleaning process—process simulation. J Mech EngGoogle Scholar
  8. 8.
    Chillman A, Hashish M, Ramulu M (2010) A novel approach to energy based evaluations of ultra highpressure waterjets. In: Pressure vessels and piping division (publication) PVP, American Society of Mechanical EngineersGoogle Scholar
  9. 9.
    Salenko AF, Shchetinin VT, Fedotyev AN (2014) Improving accuracy of profile hydro-abrasive cutting of plates of hardmetals and superhard materials. J Superhard MaterGoogle Scholar
  10. 10.
    Chillman A, Hashish M, Ramulu M (2012) Potential of waterjet peening for mainstream industrial applications. In: Proceeding of BHR group—21st international conference on water jetting: looking to the future, learning from the pastGoogle Scholar
  11. 11.
    Hashish M (1995) Erosion modes during AWJ lathe slotting. American Society of Mechanical Engineers, Manufacturing Engineering Division, MEDGoogle Scholar
  12. 12.
    Ajmal I, Hashish M (1993) Volume removal trends in abrasive waterjet turning effect of abrasive waterjet parameters. American Society of Mechanical Engineers, Production Engineering Division (Publication) PEDGoogle Scholar
  13. 13.
    Koenig W (1985) Machining of fibre reinforced plastics. CIRP Ann Manuf Technol 34:537–548CrossRefGoogle Scholar
  14. 14.
    Hashish M (1988) Machining of advanced composites with abrasive-waterjets. In: ASME winter annual meeting, Chicago, Illinois, 27 Nov–2 Dec 1988Google Scholar
  15. 15.
    Hashish M (1999) Characteristics of surfaces machined with abrasive waterjet. MD 6:23–32Google Scholar
  16. 16.
    Ho-Cheng H (1990) A failure analysis of water jet drilling in composite laminates. Int J Mach Tools Manuf 30:423–429CrossRefGoogle Scholar
  17. 17.
    Ivanov I et al (2016) The possibilities of improving the operational characteristics of vehicle gear by the use of cylindrical arched tooth gear drive. Transp Probl 11CrossRefGoogle Scholar
  18. 18.
    Ramulu M, Briggs T, Hashish M (2014) Quality and surface integrity of waterjet machined automotive composites. In: Proceeding of BHR group—22nd international conference on water jettingGoogle Scholar
  19. 19.
    Barsukov G, Zhuravleva T, Kozhus O (2017) Increasing of efficiency of environmentally friendly technology of AWJ of a glass fiber plastic. IOP Conf Ser Earth Environ Sci 50(1). IOP PublishingCrossRefGoogle Scholar
  20. 20.
    Ansari AI, Ohadi MM, Hashish M (1988) Effect of waterjet pressure on thermal energy distribution in the workpiece during cutting with an abrasive waterjet. American Society of Mechanical Engineers, Production Engineering Division (Publication) PEDGoogle Scholar
  21. 21.
    Louis H, Pude F, Versemann R (2007) Abrasive water suspension jet technology—fundamentals, application and developments. Riv Ital SaldaturaGoogle Scholar
  22. 22.
    Barsukov GV, Zhuravleva, TA, Semes VV (2016) Method waterjet cut-ting sheet layered polymeric materials. Patent RU 2577667, 20 Mar 2016Google Scholar

Copyright information

© Springer Nature Switzerland AG 2019

Authors and Affiliations

  1. 1.Orel State UniversityOrelRussia

Personalised recommendations