Advertisement

Investigation of Parts Thermo-Frictional Treatment Using Special Dynamic Appliances

  • N. Pokintelitsa
  • E. Levchenko
Conference paper
Part of the Lecture Notes in Mechanical Engineering book series (LNME)

Abstract

The results of experimental analysis of the parts thermo-frictional treatment operation processes using dynamic instrument have been presented. The results of mathematic simulation of dynamic processes taking place at parts thermo-frictional treatment have been given. The results of theoretic investigations were proved by the experiment when treating the control part. Special dynamic appliances to increase the quality of parts thermo-frictional treatment were developed. The appliance comprises the table on the elastic suspension. Mathematic simulation of a part thermo-frictional treatment on the dynamic appliance was performed. The results of simulation have been supplemented by an experimental investigation of oscillatory processes. The part dynamic movements at its treatment have been determined.

Keywords

Thermo-frictional treatment Dynamic appliances Differential equations Dynamic model Operator view Structural model Parameters of oscillations 

References

  1. 1.
    Strutinskiy VB, Pokintelitsa NI (2014) The mechanism of formation of a wavy surface when handling parts thermofrictional. J Vestn SevNTU Ser Mashinopriborostroenie Transp 161–169Google Scholar
  2. 2.
    Zarubitskiy EU (1986) The temperature of the allowable allowance during thermal friction cutting. In: Optimization of processes of cutting heat-resistant and high-strength materials, pp 106–110Google Scholar
  3. 3.
    Kozochkin MP (2005) Vibroacoustic diagnostics of technological processes. IKF Catalog, MoscowGoogle Scholar
  4. 4.
    Sorokin GM (2000) Tribology of steels and alloys. Nedra, MoscowGoogle Scholar
  5. 5.
    Nasad TG, Ignatiev AA (2002) High-speed processing difficult materials with additional streams of energy in the cutting zone. STSU, SaratovGoogle Scholar
  6. 6.
    Strutinskiy VB (2001) Mathematical modeling of processes and systems of mechanics. ZETI, ZhitomirGoogle Scholar
  7. 7.
    Goryacheva IG (2001) Mechanics of frictional interaction. Nauka, MoscowGoogle Scholar
  8. 8.
    Shaduya VL (2008) Modern methods of processing materials in machine building. Technoprospect, MinskGoogle Scholar
  9. 9.
    Gik LA (1990) Rotary cutting metals. Bk. Publishing House, KaliningradGoogle Scholar
  10. 10.
    Chichinadze AV (2001) The basics of tribology (friction, wear, lubrication). Mashinostroenie, MoscowGoogle Scholar
  11. 11.
    Penkin NS, Penkin AN, Serbin VM (2008) Fundamentals of tribology and tribotechnology. Mashinostroenie, MoscowGoogle Scholar
  12. 12.
    Mazur NP (2010) Basic theory of cutting materials. Novyj Svet, LvovGoogle Scholar
  13. 13.
    Khomenko AV, Lyashenko JA (2010) Periodic intermittent boundary friction. J Sci Tech Phys 27–33Google Scholar
  14. 14.
    Strutinskiy VB (2005) Tensor mathematical models of processes and systems. ZHGTU, ZhitomirGoogle Scholar
  15. 15.
    Strutinskiy VB, Drozdenko VM (2010) Dynamic processes in machine tools. Osnova-Print, KievGoogle Scholar
  16. 16.
    Terentyev VF (2001) Cyclic strength metallic materials. Mashinostroenie, MoscowGoogle Scholar
  17. 17.
    Bosheh SS, Mativenga PT (2006) White layer formation in hand turning of H13 tool steel at high cutting speeds using CBN tooling. Int J Mach Tools Manuf 225–233CrossRefGoogle Scholar
  18. 18.
    Gusanelli G, Hessler-Wyser A, Bobar F et al (2004) Microstructure at submicron scale of the white layer produced by EDM technique. J Mater Process Technol 289–295Google Scholar
  19. 19.
    Garbar I (2001) Microstructural changes in surface layers of metal during running-in friction processes. J Sci Mecc 631–639Google Scholar
  20. 20.
    Guo YB, Sahni JA (2004) Comparative study of turned and cylindrically around white layers. J Sci Mach Tools Manuf 135–145Google Scholar
  21. 21.
    Jachymek M, Gurey I et al (2012) Computer simulation of friction hardening of superficial layers of machine details. In: Manufacturing processes. Some problems. Basic science applications, pp 49–62Google Scholar

Copyright information

© Springer Nature Switzerland AG 2019

Authors and Affiliations

  1. 1.Sevastopol State UniversitySevastopolRussia

Personalised recommendations