Investigation of Cutting Processes and Surface of Plastic Deformation in Environment of LCTE with Nanosize Antifriction Particles

  • V. A. KuznetsovEmail author
  • A. V. Shchedrin
  • A. V. Korovin
Conference paper
Part of the Lecture Notes in Mechanical Engineering book series (LNME)


In the article, the authors examine the possibility of using the effect of selective transfer (wearless friction) in technological processes and operations of handling, providing for a significant reduction in cutting forces and deformation within the machining of parts. This, in its turn, reduces the energy intensity of technological operations and significantly reduces the cost of manufacturing machine-building products. In addition, the wearout of the tool and its consumption are reduced for manufacturing of a given batch of parts in the production cycle. An effective method of smoothing out details with replaceable polyhedral plates is proposed with a change in the way the tool is installed, and the authors designed a special device to change the position of the tool relative to the workpiece in three coordinate planes. The regularities of the formation of microgeometry during cutting and smoothing of parts with replaceable polyhedral plates were experimentally investigated. The optimum concentrations of the Valen additive with nano-sized antifriction particles were determined to obtain the minimum height of the microgeometry on the treated surface of the part.


Lubricating-cooling technological equipment (LCTE) Nanosize antifriction particles Valena additive Energy efficiency Competitiveness Cutting Surface plastic deformation 


  1. 1.
    Cherkesov VN (1997) Increase the effectiveness of deforming broaching by regulating the process of selective transfer. Dissertation, Moscow, p 123Google Scholar
  2. 2.
    Shchedrin AV, Gavrilov SA, Erokhin VV, Biryukov AI et al (2011) Improvement of the quality and productivity of methods of combined treatment with a tool with regular surface microgeometry based on the application of metal-lap greases. Strengthening Technol Coat 8:21–25Google Scholar
  3. 3.
    Shedrin AV et al (2009) Tribology as the fundamental basis of the system design of competitive technological objects. Repairing Restor Modernization 4:15–20Google Scholar
  4. 4.
    Shedrin AV, Kostrukov AA, Chivacheva NU (2015) Artificial technological intellect as the ideological basis of the general system of methods for processing materials. Strengthening Technol Coat 6:20–26Google Scholar
  5. 5.
    Shedrin AV et al (2014) Formation of objects of deformation in the encompassing surface within the plastic deformation. Friction Lubr Mach Mech 10:3–7Google Scholar
  6. 6.
    Gavrilov SA, Zinin MA (2013) Application of the effect of non-weariness in the synthesis of metal-luting greases for extreme frictional conditions. Blank Prod Mech Eng 2:21–25Google Scholar
  7. 7.
    Gavrilov SA (2013) Perfection of the process of surface plastic deformation on the basis of application of metal-plating lubricants. Friction Lubr Mach Mech 4:33–39Google Scholar
  8. 8.
    Shedrin AV, Zinin MA, Gavrilov SA (2012) Optimization of the formulation of metal-lap greases for combined mandrels of holes in blanks from non-sanded non-ferrous alloys. Bull Mach Build 9:76–79Google Scholar
  9. 9.
    Shedrin AV (2015) Influence of the angle of inclination of the acting surfaces of the deforming element on the characteristics of the methods of combined piercing (pulling) of holes. Strengthening Technol Coat 3:20–24Google Scholar
  10. 10.
    Shedrin AV, Zinin MA, Gavrilov SA (2017) Effect of the composition of the metal-plating grease on the characteristics of the combined sewing of holes in blanks of solid brass LS-59-1. Repairing Restor Modernization 1:27–34Google Scholar
  11. 11.
    Shedrin AV, Polyakov AO, Sergeev ES (2017) Theoretical and experimental study of the method of combined sewing (pulling) of holes with a tool with regular microgeometry under the conditions of application of microgeometry under the conditions of application of metal-lap greases. Strengthening Technol Coat 13(3):119–122Google Scholar
  12. 12.
    Shedrin AV, Kozlov AU (2014) Perfection of the technology of application of metal-plating lubricating materials in methods of covering the surfaceplastic deformation with a tool with regular microgeometry. Strengthening Technol Coat 3:8–12Google Scholar
  13. 13.
    Shedrin AV, Polyakov AV, Kosarev IV (2016) Technological possibilities of the method of combined sewing of holes with counterpressure of metal-lap greases/ and others. Assembly Mech Eng Instrum Mak 9:30–35Google Scholar
  14. 14.
    Kuznetsov VA, Shestavin PV, Smirnov AV, Sazonov DA (2010) Smoothing of details with polyhedral non-refining plates. Automot Ind 10:24–26Google Scholar
  15. 15.
    Kuznetsov VA, Smirnov AV, Sazonov DA (2011) Modeling the tool’s contact with the workpiece in the smoothing process in the Compass 3D software environment. Sci J MSTU “MAMI” 2:144–150Google Scholar
  16. 16.
    Kuznetsov VA, Zabolotnaya IV, Smirnov AV, Ushin DI, Homyakova NV, Vladika AA (2012) The use of system analysis and structural synthesis of methods of manufacturing parts (MFA) to achieve a fundamentally new level of competitiveness of products. High technologies in mechanical engineering. Collect Sci Works 1(22):161–167Google Scholar
  17. 17.
    Kuznetsov VA, Zabolotnaya IV, Smirnov AV, Sazonov DA (2013) Technological support of macro- and microgeometry parameters for smoothing out external cylindrical surfaces of machine parts. Truck Transp Complex Spec Mach 5:35–37Google Scholar
  18. 18.
    Kuznetsov VA, Ushin DI, Smirnov AV (2012) Creation of a tool with combined hardening of working surfaces and SOTC with nanosized antifriction metal-plating particles for machining of parts. In: Prospects for the development of science and education: a collection of scientific papers on the materials of the international scientific and practical conference on 28 Sept 2012: in 14 parts. part 12; Ministry of Education and Science of the Russian Federation, Tambov, Publishing house TROO “Business-Science-Society”, pp 160–162Google Scholar
  19. 19.
    Kuznetsov VA, Vasilev VA, Bejenar EN, Zabolotnaya IV, Sazonov DA, Smirnov AV (2012) Theoretical studies of the dependence of the geometrical parameters of the contact area of the tool and the workpiece on the method of setting the tool with a smoothing treatment. Sci J MSTU “MAMI” 2(14-2):104–109Google Scholar
  20. 20.
    Kuznetsov VA, Smirnov AV, Bezhenar EN (2014) Multicriteria optimization of processing modes and methods of tool installation when smoothing out external cylindrical surfaces with replaceable polyhedral plates. Bull Mach Build 9:65–67Google Scholar
  21. 21.
    Kuznetsov VA, Cherepahin AA (2013) System analysis and modeling of processing methods. Deutschland, Leipzig, the publishing house Lambert Academic Publishing, Moscow, p 293Google Scholar
  22. 22.
    Kuznetsov VA, Cherepakhin AA (2017) System analysis, optimization and decision making. COURSE: INFRA-M, Moscow, p 256Google Scholar

Copyright information

© Springer Nature Switzerland AG 2019

Authors and Affiliations

  • V. A. Kuznetsov
    • 1
    Email author
  • A. V. Shchedrin
    • 2
  • A. V. Korovin
    • 1
  1. 1.Moscow Polytechnic UniversityMoscowRussia
  2. 2.Bauman Moscow State Technical UniversityMoscowRussia

Personalised recommendations