Advertisement

Determining Precessional Gearboxes Efficiency of Manual Pipeline Valve Drives

  • V. Syzrantsev
  • A. Pazyak
Conference paper
Part of the Lecture Notes in Mechanical Engineering book series (LNME)

Abstract

The drives based on gears are used in machines and mechanisms of a wide variety of engineering products. The article analyzes the characteristics of modern manual drives for pipeline valves manufactured on the basis of two-stage spiroid gearboxes. These drives have an extremely low efficiency and a high starting torque which often prevents pipelines from fail-safe opening or closing under harsh operating conditions. It is shown that the drives developed on the basis of bevel precessional gears can significantly increase the efficiency. The paper describes an original method for determining the efficiency of the bevel precessional gears with a small shaft angle. Gearboxes in its design contain two bevel precessional gears. Verification of calculation results is performed based on the available experimental data of tests of the precessional gearboxes of similar structures. The authors discovered that the bevel precessional gearboxes efficiency is 2.5 times higher than in double-stage spiroid gearboxes with the same gear ratios.

Keywords

Precessional gearbox Bevel gear with a small shaft angle Efficiency 

References

  1. 1.
    Nabiev RM (2010) Chervyachnyy reduktor elektroprivoda – perezhitok proshlogo ili aktual’naya klassika (Screw gear motor is a relic of the past or current classical). Territoriia neftegaz (Oil Gas Territory) 6:100–102Google Scholar
  2. 2.
    Litvin FL, Yukishima K, Hayasaka K et al (2007) Geometry and investigation of Klingelnberg-type worm gear drive. J Mech Des Trans ASME 129(1):17–22CrossRefGoogle Scholar
  3. 3.
    Gurevich DF (2008) Raschet i konstruirovaniye truboprovodnoy armatury. Promyshlennaya truboprovodnaya armatura. Konstruirovaniye truboprovodnoy armatury (Calculation and design of pipeline valves. Industrial pipeline valves. Construction of pipeline valves). LKI PublGoogle Scholar
  4. 4.
    Gavrilenko VA (1962) Zubchatyye peredachi v mashinostroyenii (Gears in mechanical engineering). Mashgiz PublGoogle Scholar
  5. 5.
    Goldfarb VI (2011) Spiroidnyye reduktory truboprovodnoy armatury (Spiroid gearboxes for pipeline valves). Veche Publishing, MoscowGoogle Scholar
  6. 6.
    Litvin FL, Fuentes A, Zanzi C et al (2002) Face gear drive with spur involute pinion: geometry, generation by a worm, stress analysis. Comput Methods Appl Mech Eng 191:CrossRefGoogle Scholar
  7. 7.
    Goldfarb VI, Trubachev ES (2004) Manufacturing synthesis of spiroid gearing. In: Huang T (ed) Proceeding of the 2004 the eleventh world congress in mechanism and machine science, Tianjin, China, 1 Apr 2004 through 4 Apr 2004 Code 63248, pp 901–904Google Scholar
  8. 8.
    Goldfarb VI, Trubachev ES, Savelieva TV (2005) Unification of the hobs in spiroid gears. In: VDI Berichte, Issue 1904 II, VDI Verlag GMBH, pp 1755–1759Google Scholar
  9. 9.
    Goldfarb VI, Reshetnikov SM, Trubachev ES et al (2015) Slip bearing and lubricants in low-speed heavy-duty spiroid gears. Russ Eng Res 35(8):584–588CrossRefGoogle Scholar
  10. 10.
    Trubachev E (2016) Several issues of tooth generating process by two-parametric families of generating lines. Mech Mach Sci 34:97–116CrossRefGoogle Scholar
  11. 11.
    Saari OE (1954) Speed-reduction gearing. US Patent 2,696,125, 7 Dec 1954Google Scholar
  12. 12.
    Nelson WD (1961) Spiroid gearing. Mach Des 3:136–144Google Scholar
  13. 13.
    Nelson WD (1961) Spiroid gearing. Mach Des 4:93–100Google Scholar
  14. 14.
    Nelson WD (1961) Spiroid gearing. Mach Des 5:165–171Google Scholar
  15. 15.
    Bohle F (1955) Spiroid gear. Machinery 62(2):155–161Google Scholar
  16. 16.
    Syzrantsev V, Kotlikova V (2000) Mathematical and program provision of design of bevel gearing with small shaft angle. In: Proceedings of the international conference on gearing, transmissions, and mechanical systems, Nottingham Trent University, UK, 3–6 July 2000Google Scholar
  17. 17.
    Syzrantsev V, Denisov J, Wiebe V, Pazyak A (2015) The design and production of drives based on pan precess gear for oil and gas machinery. In: ASME 2015 international design engineering technical conferences and computers and information in engineering conference, vol 10, Boston, USA, 2–5 Aug 2015.  https://doi.org/10.1115/detc2015-47096
  18. 18.
    Syzrantsev V, Syzrantseva K, Pazyak A (2015) Method of loading capacity calculation of bevel precessional gear for pipeline valve drives. J Eng Sci 10(8):243–246Google Scholar
  19. 19.
    Syzrantsev V, Syzrantseva K, Pazyak A, Milanovic M (2017) Research on geometrical characteristics of straight bevel gears with a small shaft angle with a non-generated gear and generated pinion. FME Trans 45(4):661–669.  https://doi.org/10.5937/fmet1704661SCrossRefGoogle Scholar
  20. 20.
    Syzrantsev VN, Pazyak AA (2017) Precessional gears for drives of stop valves of oil and gas pipelines and gearboxes of pumps to produce heavy crude oil. Bull Tomsk Polytech Univ, Geo Assets Eng 328(2):15–27Google Scholar
  21. 21.
    Syzrantsev VN, Pazyak AA (2017) Calculating loading capacity of bevel gears with a small shaft angle with a non-generated gear and a generated pinion for drives of stop valves. Bull Tomsk Polytech Univ, Geo Assets Eng 328(3):64–74Google Scholar
  22. 22.
    Denisov JG, Syzrantsev VN, Vibe VP (2014) Soosnyy reduktor (Coaxial gearbox). RF Patent 2,529,943, 10 Oct 2014Google Scholar
  23. 23.
    Kudryavtsev VN (1966) Planetarnyye peredachi (Planetary gear trains). Mashinostroyeniye Publ, LeningradGoogle Scholar
  24. 24.
    Beyzelman RD, Tsypkin VV, Perel LY (1975) Podshipniki kacheniya (rolling bearing). Mashinostroyeniye Publ, MoscowGoogle Scholar
  25. 25.
    Bostan IA (1991) Pretsessionnyye peredachi s mnogoparnym zatsepleniyem (Precessional gears with a multiple contact). Shtpintsa Publ, KishinevGoogle Scholar

Copyright information

© Springer Nature Switzerland AG 2019

Authors and Affiliations

  1. 1.Industrial University of TyumenTyumenRussia

Personalised recommendations