Computer-Aided Design of Die Tooling for Large Parts of Airfoil Profiles

  • I. N. KhaimovichEmail author
Conference paper
Part of the Lecture Notes in Mechanical Engineering book series (LNME)


The article describes the developed computer-aided design (CAD) systems of die tooling for large parts of airfoil profiles made of aluminum alloys characterized by a high degree of unification and integration which makes it possible to reduce the design time for die tooling tenfold. The paper gives a special focus on the analysis of the design object and the structure of information support of CAD systems of die tooling of airfoil profile parts. All in all, it is possible to develop the means of providing a complex system that performs the design and documentation of blank structures, the necessary technological tooling and the formation of programs for milling the dies on machines with NPC due to the computer-aided design for the blank production objects in large-sized airfoil profile parts. The use of the proposed methods and developed means of computer-aided design of objects of technological preparation of blank production makes it possible to reduce the time of preparation of production by 15–20 times while improving the quality and accuracy of design solutions. Thus, created on the basis of the introduction of computer technologies, advanced domestic and foreign experience, CAD DT of large-sized details of the airfoil profile contribute to the solution of the urgent problems of production modernization.


Computer-aided design system Die tooling Airfoil profile parts Mathematical support Information support 


  1. 1.
    Khaimovich IN (2014) Computer-aided design for objects of blank and stamp production of compressor blades of aircraft engines. News of Higher Educational Institutions. Aircr Eng 2:44–48Google Scholar
  2. 2.
    Khaimovich IN (2014) Computer-aided design of blank forging production facilities for aircraft engine compressor blades. Russ Aeronaut 57(2):169–174CrossRefGoogle Scholar
  3. 3.
    Aronov BM, Bibikov VV, Kovalkova IN, Nenashev VY, Ivashchenko VI, Pantazieva IN (2000) Computer-aided design system for blank blades and die forgings, patent RF 2000610439Google Scholar
  4. 4.
    Grechnikov FV, Nenashev VY, Khaimovich IN (2008) Control over process engineering of compressor blades based on the integration of computer-aided design and engineering analysis. Forging Stamping Prod 6:42–46Google Scholar
  5. 5.
    Frolov MA, Haimovich IN (2016) Improvement of technological process of multiproduct production on the bases of simulation modeling of production unit. Key Eng Mater 684:487–507CrossRefGoogle Scholar
  6. 6.
    Demyanenko EG, Popov IP (2012) Boundaries of the applicability of the flanging process for obtaining thin-walled conical shells. News of Higher Educational Institutions. Aircr Eng 4:60–62Google Scholar
  7. 7.
    Demyanenko EG (2014) Research on the method of shaping barrel-shaped parts. News of Higher Educational Institutions. Aircr Eng 2:72–76Google Scholar
  8. 8.
    Surkov OC, Khaimovich AI, Khaimovich IN (2016) Practice in the application of specialized technological process templates of five-axis machining of the blade rings of blisk. News of Higher Educational Institutions. Aircr Eng 1:103–108Google Scholar
  9. 9.
    Surkov OS, Khaimovich AI, Khaimovich IN (2016) Practice in the application of specialized technologic process patterns of 5-axis machining operation of blade rings of blisks. Russ Aeronaut (Iz VUZ) 59(1):112–117CrossRefGoogle Scholar
  10. 10.
    Mikheev VA, Smolnikov SD, Surudin SV, Savin DV (2016) Statistic analysis of the processes of forming the shell details of a complex double-convex form. News of Higher Educational Institutions. Aircr Eng 1:132–136Google Scholar
  11. 11.
    Mikheev VA, Khaimovich AI (2011) Mathematical modeling of the processes of dynamic recrystallization of polycrystalline materials under conditions of intense plastic deformation. Forging Stamping Prod 7:37–44Google Scholar
  12. 12.
    Zvonov SY, Popov IP, Shlyapugin AG (2010) Features of the process of shaping hollow conical parts from a circular billet. News of Higher Educational Institutions. Aircr Eng 3:75–76Google Scholar
  13. 13.
    Dmitrieva IB (2000) Automation of the formation of spatial models of axial turbomachine elements. Abstract of the thesis for c.t.s., 16 pGoogle Scholar
  14. 14.
    Korolev AV, Korolev AA, Balayev AF, Iznairov BM, Zakharov OV, Vasin AN (2015) Probability nature of solid bodies destruction. Int J Appl Eng Res 10(21):42692–42695Google Scholar
  15. 15.
    Dubovska R (2012)The quality control of machining process with CAD/CAM system support. In: Annals of 8th international DAAAM baltic conference-industrial engineering, Tallin, Estonia, pp 27–32Google Scholar
  16. 16.
    Dubovska R, Jambor J, Majerik J (2014) Implementation of CAD/CAM system CATIA V5 in simulation of CNC machining process. Proc Eng 69:638–645CrossRefGoogle Scholar
  17. 17.
    Dubovska R, Majerik J (2014) Modeling and virtual simulation of hard surface milling and forming process using advanced CAE system. Adv Mater Res 941–944:2321–2331CrossRefGoogle Scholar
  18. 18.
    Afasov SM (2013) Modeling and simulation of manufacturing process chain. CIRP J Manuf Sci Technol 6:70–77CrossRefGoogle Scholar
  19. 19.
    Zhang J (2012) The research on modeling reconstruction for shoe-last and its application in CAD/CAM system. Proc Eng 50:45–51CrossRefGoogle Scholar
  20. 20.
    Chen Y-M, Hslao Y-T (2007) A collaborative data management framework for concurrent product and process development. Comput Integr Manuf 6:446–469Google Scholar

Copyright information

© Springer Nature Switzerland AG 2019

Authors and Affiliations

  1. 1.Samara National Research UniversitySamaraRussia

Personalised recommendations