Experimental Optimization of Cutting Modes for Milling Based on Vibroacoustic Analysis

  • R. M. KhusainovEmail author
  • P. N. Krestyaninov
  • D. D. Safin
Conference paper
Part of the Lecture Notes in Mechanical Engineering book series (LNME)


The paper proposes a method for setting the cutting parameters for metal-cutting machines. This method is based on performance estimation and a vibroacoustic analysis of the cutting process. Before experiments are carried out, a three-dimensional finite-element model of the machine is built, and then the NX Advanced Simulation module is used to calculate the actual machine frequencies. First, we set the basic and the maximum values of the cutting parameters. Then, we build an experimental matrix and carry out the experiments on its basis. The matrix is based on a Taguchi method to reduce the number of necessary experiments. The experiment is designed to find out the maximum amplitude as well as the maximum amplitude frequency of vibroacoustic oscillations. Then, we estimate experiment-specific performance. Further, we set the optimal cutting parameters to ensure the maximum performance and vibration stability of the cutting process. This is done by reference to the Harrington desirability function. The method is versatile and applicable to any machine or material.


Vibration stability Performance Cutting parameters Metal-cutting machine 


  1. 1.
    Sabirov AR, Mubarakshin II (2014) Building computational models for preliminary estimation of elastic deformations in technological equipment and tooling. Mod High Technol 5–1:76–81Google Scholar
  2. 2.
    Ivanov II, Voronov SA, Nikolaev SM, Kuts VA (2017) Simulation of vibrations in real time plane milling with spindle speed correction. Sci Edu Bauman MSTU 3:1–16Google Scholar
  3. 3.
    Cheslavskaya AA, Mironenko VV, Kolesnikov AV, Maksimenko NV, Kotov VV (2014) Engineering analysis and CAE systems: how to use them for optimizing the part formation process. Metallurgist 12:24–31Google Scholar
  4. 4.
    Lavrentyieva M, Govorkov A (2017) Identifying the objects in the structure of an e-model by means of identified formal parameters in the design and engineering environment. MATEC Web Conf. Scholar
  5. 5.
    Kasjanov SV, Kondrashov AG, Safarov DT (2017) Regulation of geometrical parameters deviations of automotive components parts through diagnostic measurements organization. Int Conf Ind Eng ICIE 206:1508–1514Google Scholar
  6. 6.
    Grechishnikov VA, Petukhov YE, Pivkin PM et al (2017) Trochoidal slot milling. Russ Eng Res 37(9):821–823CrossRefGoogle Scholar
  7. 7.
    Akhatov RKh, Govorkov AS, Zhilyayev AS (2014) Development and implementation of the manufacturability analysis system in the product launch process. Bull Samara RAS Sci Center 16(5):1279–1283Google Scholar
  8. 8.
    Tumanov AA (2013) Creation of modern information-measuring system based on integrated measurement power and vibroactical parameters cutting process. Sci Contemp 25–2:57–60Google Scholar
  9. 9.
    Kiryuschenko EV (2012) Dynamic modeling of technological system for milling process. Bull Voronezh State Tech Univ 10–1:96–100Google Scholar
  10. 10.
    Kozochkin MP (2009) Features of vibrations when cutting materials. STIN 1:29–35Google Scholar
  11. 11.
    Kudinov VA (1967) Machine dynamics. Mashinostroyeniye, MoscowGoogle Scholar
  12. 12.
    Ranjit KR (2001) Design of experiments using the Taguchi approach: 16 steps to product and process improvement. Wiley-Interscience Publication (2001)Google Scholar
  13. 13.
    Avrutin SV (1964) Milling. Vysshaya Shkola, MoscowGoogle Scholar
  14. 14.
    Ryabov YeA, Yurasov SYu, Khisamutdinov RM (2016) Trochoidal milling of the inner contour with an end mill. In: Proceedings of the international science and technology conference on innovative engineering technologies, equipment, and materials, pp 150–154Google Scholar
  15. 15.
    Balabanov IP, Kondrashov AG (2014) Shaping of cutting part of angle milling cutters with nonzero geometry. World Appl Sci J 30(12):1731–1734Google Scholar
  16. 16.
    Baranovsky YuV, Brakhman LA, Gdalevich AI et al (1995) Metal-cutting parameters. NIITavtoprom, MoscowGoogle Scholar
  17. 17.
    Molokova SV, Bobarikova IO (2015) Statistical data processing methods and algorithms. ISTU Publishing House, Irkutsk, TutorialGoogle Scholar
  18. 18.
    YeYu Gorin, Kryazhev AYu, YeYu Tatarkin, Kryazhev YuA (2015) Improving the dynamic stability in butt milling. Polzunovsky Bull 2:43–48Google Scholar
  19. 19.
    Method for testing mid-size milling machines of the same series for vibration stability in cutting (1961). ENIMS, MoscowGoogle Scholar
  20. 20.
    Bulgakova IN, Morozov AN (2009) Using desirability functions to formalize the complex industrial-enterprise competitiveness values. Bull Voronezh State Univ 2:54–56Google Scholar

Copyright information

© Springer Nature Switzerland AG 2019

Authors and Affiliations

  • R. M. Khusainov
    • 1
    Email author
  • P. N. Krestyaninov
    • 1
  • D. D. Safin
    • 1
  1. 1.Branch of Kazan University in Naberezhnye ChelnyNaberezhnye ChelnyRussia

Personalised recommendations