Question of Creation of General Theory of Deep Holes Machining

  • L. MironovaEmail author
  • L. Kondratenko
  • V. Terekhov
Conference paper
Part of the Lecture Notes in Mechanical Engineering book series (LNME)


The article notes that the development of industry poses the task of creating a general theory of the deep hole machining in the details. It is shown that drilling holes in details largely depends on the dynamic features of the mechanisms and the cutting process. A system of differential equations describing only the longitudinal and torsional oscillations of the cutting part of the tool is given. Using the example of the experiment on drilling holes with a diameter of 16 mm in austenitic, pearlitic steels, the problems associated with the construction of the cutting part of a gun drill, its wear, and the dynamics of the cutting process are shown. In a simplified setting, some features of the hydraulic system of the whole deep drilling machine are described, taking into account the supply of cutting fluid.


Deep hole Gun drill Cutting part Cutting fluid Tool Wear Chips Nozzle 


  1. 1.
    Terechov VM, Kondratenko LA (1999) A mathematical model of the process of drilling deep holes. Mach Build Mach Reliab 1:55–61Google Scholar
  2. 2.
    Ee KC, Dillon OW Jr, Jawahir IS (2005) Finite element modeling of residual stresses in machining induced by cutting using a tool with finite edge radius. J Mech 47:1611–1628zbMATHGoogle Scholar
  3. 3.
    Yefimovich IA (2003) Dynamics of cutting forces during insertion. Mech Eng 2:45–47Google Scholar
  4. 4.
    Kondratyuk OA (2005) The stability of the deep hole drilling process on small rotary indexing machines. J Equip Tools Professionals 6:22–23Google Scholar
  5. 5.
    Gunay M, Seker U, Sur G (2006) Design and construction of a dynamometer to evaluate the influence of cutting tool rake angle on cutting forces. Mater Des 27:1097–1110CrossRefGoogle Scholar
  6. 6.
    Amor Messaond, Claus Weis (2009) Monitiring a deep holl drilling process by nonlinear time series modeling. J Sound Vib 326(3–5):620–630Google Scholar
  7. 7.
    Terechov VM, Kondratenko LA, Mironova LI (2016) Some dynamic features of interaction the cutting part of the gun drill with the detail. Eng Autom Probl 4:78–84Google Scholar
  8. 8.
    Granovsky GI, Granovsky VG (1985) Metal cutting. The higher school, MoscowGoogle Scholar
  9. 9.
    Klushin MI (1958) Cutting of metals. Mashgiz, MoscowGoogle Scholar
  10. 10.
    Kondratenko L, Dmitriev V, Mironova L (2017) Simulation of a drive with a long connecting link. In: 26th international conference vibroengineering. Vibroengineering Procedia, vol 12, pp 231–236. Scholar
  11. 11.
    Lakirev SG, Deryabin IP (2000) Modelirovaniye obrabotki otverstiy ruzheynymi sverlami i razvertkami (Simulation of hole machining with gun drills and sweeps). Materialy MONPK “Snezhinsk and nauka”, SFTI, pp 107–108Google Scholar
  12. 12.
    Kondratenko LA, Dmitriev VG, Mironova LI (2017) The method of studying the changes in stresses and velocities of motion in a spindle-shaft system is a technological object. In: The theses of the XXIII international symposium “dynamic and technological problems of mechanics of constructions and continuous media named after I. A.G. Gorshkov”, pp 101–103Google Scholar
  13. 13.
    Kondratenko LA, Terekhov VM, Mironova LI (2017) About one method of research torsional vibrations of the core and his application in technologies of mechanical engineering. Eng Autom Probl 1:133–137Google Scholar
  14. 14.
    Kondratenko LA (2005) Vibrations and speed regulation methods of movement of technological objects. MRSU, MoscowGoogle Scholar
  15. 15.
    Kondratenko LA (2008) Calculation of velocity variations and stresses in machine assemblies and components. Sputnik, MoscowGoogle Scholar
  16. 16.
    Kondratenko L, Mironova L, Terekhov V (2007) Investigation of vibrations during deepholes machining. In: 25th international conference vibroengineering. Vibroengineering Procedia, vol 11, pp 7–11. Scholar
  17. 17.
    Kondratenko L, Mironova L, Terekhov V (2017) On the question of the relationship between longitudinal and torsional vibrations in the manufacture of holes in the details. In: 26th conference in St. Petersburg, June, 2017. Vibroengineering Procedia, vol 12, pp 6–11. Scholar

Copyright information

© Springer Nature Switzerland AG 2019

Authors and Affiliations

  1. 1.National Research Nuclear University MEPhI (Moscow Engineering Physics Institute)MoscowRussia
  2. 2.State Science Center RF of TsNIITMashMoscowRussia

Personalised recommendations