Advertisement

Determination of Maximum Deflection of Elastically Isotropic Plates with Combined Boundary Conditions Using Scaling Method

  • V. I. Korobko
  • N. G. Kalashnikova
  • O. V. Kalashnikova
Conference paper
Part of the Lecture Notes in Mechanical Engineering book series (LNME)

Abstract

As a rule, the problems of statics and dynamics at physical and mechanical modelling of structures are considered separately. In this article, these two types of plate deformations (transverse bending and free vibrations) are considered in its interconnection. The functional dependence maximum deflection—vibration fundamental frequency for elastic isotropic plates of arbitrary form with a convex contour and combined boundary conditions (combination of simple support and clamping)—is obtained. We suggest the method of determination of maximum deflection of full-scale structures in the form of uniformly loaded plates by the vibration fundamental frequency of plate models in the unloaded state obtained experimentally. Applying regression analysis of the solutions which are presented in the scientific and reference literature, an approximating function w0 − ω is plotted. It satisfies all variations of plates with a convex contour and arbitrary boundary conditions (combination of simple support and clamping around the contour) with the error (5–6)%. The article provides the examples of the proposed method application. It shows good accuracy.

Keywords

Elasticity Isotropic plates Convex contour Simple supporting Clamping Interconnection of parameters Maximum deflection Fundamental frequency 

References

  1. 1.
    Sedov LI (1981) Methods of similarity and dimensionality in mechanics. Nauka, Moscow (in Russ.)Google Scholar
  2. 2.
    Kirpichev VL (1951) Talks about mechanics. GITTL, Moscow (in Russ.)Google Scholar
  3. 3.
    Belov NN, Kopanica DG, Jugov NT (2013) Mathematic modellig of dynamic strength of constructional materials. ASV, Moscow (in Russ.)Google Scholar
  4. 4.
    Langhaar H (1951) Dimensional analysis and theory of models. Wiley, New YorkzbMATHGoogle Scholar
  5. 5.
    Young DF (1971) Basic principles and concepts of model analysis. Exp Mech 11(7):325–336CrossRefGoogle Scholar
  6. 6.
    Rots JG (1991) Computer simulation of masonry fracture: continuum and discontinuum models. In: Proceeding of the International symposium on the computer methods in structural masonry, SwanseaGoogle Scholar
  7. 7.
    Ali SS, Page AW (1990) Finite element model for masonry subjected to concentrated loads. Proc ASCE: J Struct Div 114:1761–1784CrossRefGoogle Scholar
  8. 8.
    Masiani R, Rizzi N, Trovalusc P (1995) Masonry as structured continuum. Meccanica 30:673–683MathSciNetCrossRefGoogle Scholar
  9. 9.
    Korobko VI (1997) Isoperimetric method in structural mechanics: theoretical backgrounds of izoperimetric method. ASV, Moscow (in Russ.)Google Scholar
  10. 10.
    Korobko VI, Korobko AV (2010) Structural mechanics of plates: technical theory. Izdatel’skij dom Spektr, Moscow (in Russ.)zbMATHGoogle Scholar
  11. 11.
    Timoshenko SP, Vojnovskij-Kriger S (1963) Plates and shells. Gosmatizdat, Moscow (in Russ.)Google Scholar
  12. 12.
    Gontkevich VS (1964) Natural vibrations of plates and shells. Naukova dumka, Kiev (in Russ.)Google Scholar
  13. 13.
    Korobko AV, Savin SY, Filatova SA (2016) Determination of stiffness and fundamental frequency of oscillations of fixed circuit plates. Izv Vyssh Uchebn Zaved Ser Teknologiya Tekstil’noi Promyshlennosti 3:290–295 (in Russ.)Google Scholar
  14. 14.
    Korobko AV, Kalashnikova NG (2017) Basic frequencies of vibrations of sector membranes with curvilinear area defined in a circle arc. Stroitelstvo i Rekonstruktsiya 1:10–17 (in Russ.)Google Scholar
  15. 15.
    Kolchunov VI, Kalashnikova OV (2013) Control of deflection rate of beam type constructions made of physically-nonlinear material. Stroitelstvo i Rekonstruktsiya 6:21–27 (in Russ.)Google Scholar
  16. 16.
    Korobko VI, Kalashnikov MO, Bukhtiyarova AS (2016) Stiffness evaluation of the beams during the inspection of the textile industry buildings by vibration methods. Izv Vyssh Uchebn Zaved Seriya Teknologiya Tekstil’noi Promyshlennosti 3:270–275 (in Russ.)Google Scholar
  17. 17.
    Turkov AV, Abashina NS, Vetrova OA (2017) Deflections and frequencies of natural oscillations of systems of composite two-layer isotropic plates of the round shape at the change of thickness of one of the layers. J Appl Eng Sci 3:389–394.  https://doi.org/10.5937/jaes15-14669CrossRefGoogle Scholar

Copyright information

© Springer Nature Switzerland AG 2019

Authors and Affiliations

  • V. I. Korobko
    • 1
  • N. G. Kalashnikova
    • 1
  • O. V. Kalashnikova
    • 1
  1. 1.Orel State University Named after I. S. TurgenevOrelRussia

Personalised recommendations