Advertisement

Increased Durability of Flexible Gear of Harmonic Drive Due to Flexible Bearing Modification

  • I. E. Lyuminarsky
  • S. E. Lyuminarsky
  • E. S. Lyuminarskaya
Conference paper
Part of the Lecture Notes in Mechanical Engineering book series (LNME)

Abstract

The research object is a harmonic drive with a cam wave generator. A harmonic drive operation is limited by flexible gear fatigue resistance, flexible bearing durability and teeth sides wear resistance. After prolonged use, the wave generator may possibly wear. To increase the fatigue resistance, a refined method of ring gear stress calculation should be developed for the consideration of the drive structural change and parameter impact on flexible gear stresses. The developed mathematical model of a harmonic drive enabled to prove the possibility of flexible gear stress reduction due to a small recess (some dozens of µm) on the outer flexible bearing surface. The obtained dependencies expand the knowledge about the impact of various harmonic drive factors on flexible gear stresses.

Keywords

Flexible bearing Flexible gear Fatigue resistance Flexible bearing outer race Stresses 

References

  1. 1.
    Ginzburg EP (1979) Wave gear. Mashinostroenie Publisher, LeningradGoogle Scholar
  2. 2.
    Ivanov MN (1981) Harmonic drives. Vysshaya Shkola Publisher, MoscowGoogle Scholar
  3. 3.
    Poletuchii AI (2005) Theory and design of high-performance wave gear mechanisms. NAU KhAI im. M. Zhukovskogo Publisher, KharkovGoogle Scholar
  4. 4.
    Timofeev GA (1997) Development of methods of calculation and design of wave gear drives for servo systems. Dissertation, Bauman Moscow State Technical UniversityGoogle Scholar
  5. 5.
    Gerashchenko AN, Postnikov VA, Samsonovich SL (2010) Pneumatic, hydraulic and electric actuators aircraft based on wave actuators. MAI-PRINT Publisher, MoscowGoogle Scholar
  6. 6.
    Zavjalov VM (2010) Working capacity of wave tooth gearings from the point of view of pressure in a flexible wheel of this transfer. Herald Bauman Moscow State Tech Univ 4–3:279–284Google Scholar
  7. 7.
    Poletuchii AI, IA Stetsenko (2007) Optimization of the parameters of the wave gear for torque limit. Open Inf Comput Integr Technol 37:73–79Google Scholar
  8. 8.
    Shuvalov SA, Gorelov VN (1983) Study of stresses in a flexible ring gear using the finite elements method. Vestn Mashinostroeniya, 9–11Google Scholar
  9. 9.
    Gorelov VN (1982) The state of tension of the gear wreath of flexible gear wheel of Harmonic drive. Izv Vysh Uchebn Zaved Mashinostr 10:7–10Google Scholar
  10. 10.
    Ivanov MN (1974) On stresses in a ring gear of harmonic drive flexible gear. Izv Vuzov Mashinostr 5:180–183Google Scholar
  11. 11.
    Zakharchenko AD (2004) Deformation and tension in flexible gear wheel (envelope) of a wave gear drive. Izv SFedU. Eng Sci 8(43):228–229Google Scholar
  12. 12.
    Sukov GS, Strelnikov VN (2007) Features strength calculation of flexible gear wheel of harmonic drive. Progressive Technol Syst Mech Eng 2(34):230–237Google Scholar
  13. 13.
    Flavius A (2007) 3D modeling of the harmonic drive using CATIA. Annals of the Oradea University. Fascicle Manag Technol Eng VI(XVI):882–885Google Scholar
  14. 14.
    Iangulov VS (2011) Wave and screw mechanism and transmission. Tomskogo politekhnicheskogo universiteta Publisher, TomskGoogle Scholar
  15. 15.
    Lyuminarsky IE, Lyuminarsky SE (2009) Calculation method of linear systems with limited unilateral constraints, under static loading. Herald Bauman Moscow State Tech Univ Mech Eng 2:84–90Google Scholar
  16. 16.
    Lyuminarsky SE, Lyuminarsky IE (2012) Mathematical model of harmonic drive with a disc wave generator. Mashinostr i Inzhenernoye Obrazovanie 2:45–52Google Scholar
  17. 17.
    Lyuminarsky IE, Lyuminarsky SE (2011) Calculation of interaction’s forces of Harmonic drive’s elements. Herald Bauman Moscow State Tech Univ Mech Eng Spec Iss “Power and transport engineering”, pp 230–240Google Scholar
  18. 18.
    Lyuminarsky SE (2012) Determination of the tension state of flexible gear wheel of Harmonic drive. Proc Univ Mech Eng Spec Iss “Fundamental problems of creating and supporting high-tech industries”, pp 17–22Google Scholar
  19. 19.
    Lyuminarsky IE, Lyuminarsky SE (2013) Flexible bearing. Patent of the Russian Federation 133574, 20 Oct 2013Google Scholar
  20. 20.
    Lyuminarsky IE, Lyuminarsky SE (2015) Harmonic drive with a changed form of contact between the cam wave generator and the flexible gear. Patent of the Russian Federation 2551701, 27 May 2015Google Scholar

Copyright information

© Springer Nature Switzerland AG 2019

Authors and Affiliations

  • I. E. Lyuminarsky
    • 1
  • S. E. Lyuminarsky
    • 1
  • E. S. Lyuminarskaya
    • 1
  1. 1.Bauman Moscow State Technical UniversityMoscowRussia

Personalised recommendations