Advertisement

Research of Characteristics and Parameters of Cycloidal Gear

  • Yu. I. Brovkina
  • A. N. Sobolev
  • A. Y. Nekrasov
Conference paper
Part of the Lecture Notes in Mechanical Engineering book series (LNME)

Abstract

One of the most important tasks of modern mechanical engineering is to develop efficient drive mechanisms, possessing high accuracy, security, and significant load capacity at low weight and dimensions. For a successful solution of this problem, the improved research methods and the automation of design process of technical means, providing the improvement of mechanisms characteristics and the choice of optimal construction parameters, are needed. Cycloidal gears are the perspective types of gear mechanisms. They have a number of advantages: the reliability, working capacity in conditions of dynamic loads, high efficiency, the compactness, and large range of gear ratios. Concerning the question of the improving research methods of characteristics and parameters of cycloidal gears is topical. This article presents the automated technique of the calculation of the size of clearances and deformations, arising between teeth and trowels of cycloidal engagement. An analysis of the influence of profile correction at the size of clearances and deformations, and also at the number of teeth, that simultaneously transmit the load, is cited. The software application, developed by the authors, provides a computer-aided creation of models of cycloidal mechanisms with obtaining the required clearances. On the basis of the correction of geometric parameters of the gear, a recreation of management programs for CNC machines has been automatically carried out. The authors presume a further elaboration of developed software application with the aim of its adaptation for the solution of a wide range of tasks of the research and the modeling of constructive and technological cycloidal gear parameters.

Keywords

Cycloidal gear Reducer Pin Satellite Clearance Deformation 

References

  1. 1.
    Nekrasov AYa, Arbuzov MO, Sobolev AN (2014) A methodology of the automated control of power mechanical multi-contact systems elements static loading. STIN 12:2–6Google Scholar
  2. 2.
    Sobolev AN, Nekrasov AYa (2015) Calculation and modeling of machines maltese cross mechanisms in CAD-CAE-systems. STIN 9:2–5Google Scholar
  3. 3.
    Nekrasov AYa, Arbuzov MO, Sobolev AN (2015) Automatic control of the static loads in multicontact mechanical systems. Russ Eng Res 35(6):442–446CrossRefGoogle Scholar
  4. 4.
    Sobolev AN, Nekrasov AYa (2016) CAD/CAE modeling of maltese cross mechanisms in machine tools. Russ Eng Res 36(4):300–302CrossRefGoogle Scholar
  5. 5.
    Nekrasov AYa, Arbuzov MO (2012) A mathematical model of links loading in mechanical arrangements with multipaired force contact. Messenger MSTU “STANKIN” 1(18):32–35Google Scholar
  6. 6.
    Sobolev AN, Nekrasov AYa, Arbuzov MO (2014) Computer-aided design and modeling of cam mechanisms in CAD-systems. Messenger MSTU “STANKIN” 1:102–106Google Scholar
  7. 7.
    Sobolev AN, Nekrasov AYa, Arbuzov MO (2014) An upgraded methodology of gear and worm mechanisms CAD/CAE. Messenger MSTU “STANKIN” 2:81–86Google Scholar
  8. 8.
    Sobolev AN, Kosov MG, Nekrasov AY. (2014) The modeling of constructions of gear housing details using calculating macrocells. Messenger MSTU “STANKIN” 3(30):98–101Google Scholar
  9. 9.
    Sobolev AN, Kosov MG, Brovkina UI (2014) A software realization of the updated version of non-solid simulation system. Messenger MSTU “STANKIN” 4(31):149–153Google Scholar
  10. 10.
    Kosov MG, Sobolev AN, Nekrasov AYa (2015) The information structure of the system of nonsolid modeling. Messenger MSTU “STANKIN” 1(32):108–111Google Scholar
  11. 11.
    Sobolev AN, Nekrasov AYa, Yagolnitser OV et al (2016) An experimental model of the estimation of techno-ecological parameters of machine-tool equipment. Messenger MSTU “STANKIN” 1(36):33–37Google Scholar
  12. 12.
    Sobolev AN, Nekrasov AYa (2016) The automated design of ratchet mechanisms. Messenger MSTU “STANKIN” 3(38):38–41Google Scholar
  13. 13.
    Balabina TA, Mamaev AN, Sobolev AN (2017) The influence of the elastic element to the movement of the slave link of cam-gear-lever mechanism. Messenger MSTU “STANKIN” 1(40):43–47Google Scholar
  14. 14.
    Sobolev AN, Nekrasov AYa, Arbuzov MO (2017) The modeling of noncircular gears. Messenger MSTU “STANKIN” 1(40):48–51Google Scholar
  15. 15.
    Brovkina YuI, Sobolev AN, Nekrasov AYa (2017) An analytical method of the calculation of positional error of links of mechanisms of machines with parallel kinematics. Messenger MSTU “STANKIN” 1(40):52–56Google Scholar
  16. 16.
    Sobolev AN, Nekrasov AYa, Yagolnilser OV (2017) An upgrade of the methodology of the design of harmonic reducers and of its using in construction preparation of students of engineering. Messenger MSTU “STANKIN” 2(41):23–26Google Scholar
  17. 17.
    Nekrasov AYa, Sobolev AN, Arbuzov MO (2016) An innovate interactive software product as a means of the advancement of the efficiency of engineering devices design. Innovation 8(214):104–107Google Scholar
  18. 18.
    Yagolnitser OV, Butrimova EV, Sobolev AN et al (2016) An information-measuring complex for the investigation of factors affecting for the ergonomics of production environment of machine-building enterprise. Life Saf 9(189):11–14Google Scholar
  19. 19.
    Fomin MV (2009) Planetary-forging transmissions. Publishing House of MSTU named by N.E. Bauman, MoscowGoogle Scholar
  20. 20.
    Blagojevic M (2014) Analysis of clearances and deformations at cycloid disc. Mach Des 6(3):79–84Google Scholar
  21. 21.
    Grechishnikov VA, Isaev AV, Kuptsov VR et al (2016) Mathematical model and practical implementation of high-speed machining of parts for cycloidal reducer used in industrial machining robots. Messenger MSTU “STANKIN” 4(39):79–84Google Scholar
  22. 22.
    Sobolev AN, Nekrasov AYa (2015) The upgrading of mangle gear design methodology by means of new CAE software. Messenger MSTU “STANKIN” 3(34):34–38Google Scholar
  23. 23.
    Sobolev AN, Nekrasov AYa (2016) Calculation and modeling of involute and cycloidal gears of devices in CAD-system. Messenger MSTU “STANKIN” 2(37):13–16Google Scholar
  24. 24.
    Sobolev AN, Nekrasov AYa, Arbuzov MO et al (2017) Perfection of the computer-aided design technique of hypocycloid pin gears. Eng Technol 10:44–49Google Scholar
  25. 25.
    Sobolev AN, Nekrasov AYa, Rivkin AV et al (2017) Improvement of the interactive design methodology of planetary-cycloidal transmission. Eng Technol 11:32–36Google Scholar

Copyright information

© Springer Nature Switzerland AG 2019

Authors and Affiliations

  • Yu. I. Brovkina
    • 1
  • A. N. Sobolev
    • 2
  • A. Y. Nekrasov
    • 2
  1. 1.Moscow Polytechnic UniversityMoscowRussia
  2. 2.Moscow State Technological University “STANKIN”MoscowRussia

Personalised recommendations