Advertisement

Toward Optimum Topology Protocol in Health Monitoring

  • Mohammad E. Haque
  • Mohammad A. Hannan
Chapter
Part of the EAI/Springer Innovations in Communication and Computing book series (EAISICC)

Abstract

Sensor technology has opened up numerous opportunities to advanced health and maintenance monitoring of civil infrastructure. Compared to the traditional tactics, it offers a better way of providing relevant information regarding the condition of building structure at a lower price and greater range. This paper addresses the coverage area and lifetime-related issues arise in the building structural monitoring system. The monitoring system consists of a large number of sensor nodes for collecting structural health information. Numerous domestic buildings, especially long-span buildings, have lower frequency response that is challenging to accurately measure using a number of deployed sensor nodes. The way the sensor nodes are connected plays an important role in providing signals with required strengths. Out of many topologies, the dense and sparse topology was extensively used in sensor network applications for collecting health information. The lifetime of the wireless sensor network is a fundamental issue because it determines the whole system aliveness. Network lifetime is one of the most important performance indicators for real-life application. The objective of this article is to investigate the network lifetime and compare the computational results of different kinds of transmission construction protocols to find the optimum lifetime protocol for extending the monitoring system lifetime. The proposed dense topology sensor network maximizes the network lifetime and minimizes the system cost. The result shows that the dense topology would be a good choice for monitoring building structural health damage.

Keyword

Monitoring network Topology protocol Lifetime 

Notes

Acknowledgments

The research described in this paper was partially financially supported by the Science Fund Malaysia.

References

  1. 1.
    C.R. Farrar, K. Worden, An introduction to structural health monitoring. Philos. Trans. R. Soc. A Math. Phys. Eng. Sci. 365(1851), 303–315 (2007)CrossRefGoogle Scholar
  2. 2.
    J.M. Renno, B.R. Mace, Vibration modelling of structural networks using a hybrid finite element/wave and finite element approach. Wave Motion 51(4), 566–580 (2014)MathSciNetCrossRefGoogle Scholar
  3. 3.
    M. Choi, B. Sweetman, Efficient calculation sensor technology for structural health monitoring. Struct. Health Monit. 9(1), 13–24 (2010)CrossRefGoogle Scholar
  4. 4.
    M.E. Haque, M.A. Hannan, M.F. Hossain, M.M. Islam, M.J. Abedin, Lifetime measure of dense and sparse topology sensor network in structural health monitoring. EAI Endorsed Trans Scalable Info Syst 4, e6 (2017)Google Scholar
  5. 5.
    S.D. Glaser, H. Li, M.L. Wang, J. Ou, J. Lynch, Sensor technology innovation for the advancement of structural health monitoring: a strategic program of US-China research for the next decade. Smart Struct Syst 3(2), 221–244 (2007)CrossRefGoogle Scholar
  6. 6.
    G. Park, T. Rosing, M.D. Todd, C.R. Farrar, W. Hodgkiss, Energy harvesting for structural health monitoring sensor networks. J. Infrastruct. Syst. 14(1), 64–79 (2008)CrossRefGoogle Scholar
  7. 7.
    S. Alahakoon, D.M. Preethichandra, E.M.I. Ekanayake, Sensor network applications in structures: a survey. EJSE Int., 1--10 (2009). www.ejse.org/Archives/ Fulltext/2009/Special/2009SP1.pdfGoogle Scholar
  8. 8.
    F. Casciati, F. Lucia, Sensor placement driven by a model order reduction (MOR) reasoning. Smart Struct Syst 13(3), 343–352 (2014)CrossRefGoogle Scholar
  9. 9.
    S. Cho, C.B. Yun, J.P. Lynch, A.T. Zimmerman, B.F. Spencer Jr., T. Nagayama, Smart wireless sensor technology for structural health monitoring of civil structures. Int J Steel Struct 8(4), 267–275 (2008)Google Scholar
  10. 10.
    P.C. Chang, A. Flatau, S.C. Liu, Review paper: Health monitoring of civil infrastructure. Struct. Health Monit. 2(3), 257–267 (2003)CrossRefGoogle Scholar
  11. 11.
    K. Mechitov, W. Kim, G. Agha, T. Nagayama, High-frequency distributed sensing for structure monitoring, in Proceeding of First International Workshop on Networked Sensing Systems (INSS 04) 6 (2004), pp. 101–105Google Scholar
  12. 12.
    Y.Z. Song, C.R. Bowen, A.H. Kim, A. Nassehi, J. Padget, N. Gathercole, Virtual visual sensors and their application in structural health monitoring. Struct Health Monit. 3, 1475921714522841 (2014)Google Scholar
  13. 13.
    V.A. Attarian, F.B. Cegla, P. Cawley, Long-term stability of guided wave structural health monitoring using distributed adhesively bonded piezoelectric transducers. Struct. Health Monit. 13, 265 (2014)CrossRefGoogle Scholar
  14. 14.
    J. Paek, N. Kothari, K. Chintalapudi, S. Rangwala, R. Govindan, The Performance of a Wireless Sensor Network for Structural Health Monitoring (Center for Embedded Network Sensing, California, 2004)Google Scholar
  15. 15.
    M.E. Haque, Development of dense and sparse topology sensor networks for structural health monitoring using atarraya simulator. Master of Science dissertation (National University of Malaysia, Selangor, 2015)Google Scholar
  16. 16.
    R.P. Bandara, T.H. Chan, D.P. Thambiratnam, Structural damage detection method using frequency response functions. Struct. Health Monit. 13, 418 (2014)CrossRefGoogle Scholar
  17. 17.
    L.L. Halpern, J.Y.P. Bahl, Y.M. Wang, R. Wattenhofer, A cone-based distributed topology-control algorithm for wireless multi-hop networks. IEEE/ACM Trans. Networking 13(1), 147–159 (2005)CrossRefGoogle Scholar
  18. 18.
    W.S. Conner, L. Krishnamurthy, R. Want, Making everyday life easier using dense sensor networks, in Ubicomp 2001: ubiquitous computing, (Springer, Berlin, 2001), pp. 49–55CrossRefGoogle Scholar
  19. 19.
    M. Li, P.J. Wan, Y. Wang, O. Frieder, Sparse power efficient topology for wireless networks, in Proceedings of the 35th Annual Hawaii International Conference on IEEE (2002), pp. 3839–3848Google Scholar
  20. 20.
    G. Fortino, A. Guerrieri, G.M. O'Hare, A. Ruzzelli, A flexible building management framework based on wireless sensor and actuator networks. J. Netw. Comput. Appl. 35(6), 1934–1952 (2012)CrossRefGoogle Scholar
  21. 21.
    H. Kawahigashi, Y. Terashima, N. Miyauchi, T. Nakakawaji, Modeling ad hoc sensor networks using random graph theory. in Consumer Communications and Networking Conference on IEEE (2005), pp. 104–109Google Scholar
  22. 22.
    B. Nikola, A. Dimitris, K. Berberidis, F. Casciati, J. Plata-Chaves, Spatio-temporal protocol for power-efficient acquisition wireless sensors based SHM. Smart Struct Syst 14(1), 1–16 (2014)CrossRefGoogle Scholar
  23. 23.
    S.B. Chase, The role of smart structures in managing an aging highway infrastructure. in Keynote Presentation, SPIE Conference on Health Monitoring of Highway Transportation Infrastructure (2001)Google Scholar
  24. 24.
    M. Moore, B. Phares, B. Graybeal, D. Rolander, G. Washer, Reliability of visual inspection for highway bridges. Volume I: Final report (No. FHWA-RD-01-020) (2001)Google Scholar
  25. 25.
    K. Vidya, Wireless sensor network for structural health monitoring. Doctor of Philosophy dissertation (Clarkson University, Potsdam, 2008)Google Scholar
  26. 26.
    U. Yildirim, O. Onur, B. Nikola, A prediction-error-based method for data transmission and damage detection in wireless sensor networks for structural health monitoring. J. Vib. Control. 19(15), 2244–2254 (2013)CrossRefGoogle Scholar
  27. 27.
    A. Araujo, J. García-Palacios, J. Blesa, F. Tirado, E. Romero, A. Samartín, O. Nieto-Taladriz, Wireless measurement system for structural health monitoring with high time-synchronization accuracy. IEEE Trans. Instrum. Meas. 61(3), 801–810 (2012)CrossRefGoogle Scholar
  28. 28.
    W. Chen, X. Jiang, X. Li, J. Gao, X. Xu, S. Ding, Wireless sensor network nodes correlation method in coal mine tunnel based on Bayesian decision. Measurement 46(8), 2335–2340 (2013)CrossRefGoogle Scholar
  29. 29.
    J. Khash-Erdene, N.S. Rohan, F. Kallirroi, A.K. Marios, F. Glauco, O. Toula, Layout optimization of wireless sensor networks for structural health monitoring. Smart Struct Syst 14(1), 39–54 (2014)CrossRefGoogle Scholar
  30. 30.
    G. Sun, J. Chen, W. Guo, K.J.R. Liu, Signal processing techniques in network-aided positioning. IEEE Signal Process. Mag. 7, 12–23 (2005)Google Scholar
  31. 31.
    M.A. Labrador, P.M. Wightman, Topology Control in Wireless Sensor Networks 412 (Springer, Heidelberg, 2009)zbMATHGoogle Scholar
  32. 32.
    W.R. Heinzelman, A. Chandrakasan, H. Balakrishnan, Energy-efficient communication protocol for wireless microsensor networks, in System Sciences, 2000. Proceedings of the 33rd Annual Hawaii International Conference on: 10. IEEE (2000)Google Scholar
  33. 33.
    S. Nath, V.N. Ekambaram, A. Kumar, P.V. Kumar, Theory and algorithms for hop-count-based localization with random geometric graph models of dense sensor networks. ACM Trans Sens Netw (TOSN) 8(4), 35 (2012)Google Scholar
  34. 34.
    P. Santi, Topology control in wireless ad hoc and sensor networks. ACM Comput Surv (CSUR) 37(2), 164–194 (2005)MathSciNetCrossRefGoogle Scholar

Copyright information

© Springer International Publishing AG, part of Springer Nature 2019

Authors and Affiliations

  • Mohammad E. Haque
    • 1
  • Mohammad A. Hannan
    • 2
  1. 1.Department of Electrical and Electronic EngineeringZ.H.Sikder University of Science and TechnologyKartikpurBangladesh
  2. 2.Department of Electrical Power EngineeringCollege of Engineering, Universiti Tenaga NasionalKajangMalaysia

Personalised recommendations