Advertisement

Generation Frequency of Rebound Shock Waves from Bubble Collapses in Cavitation Jet

  • K. Nishibayashi
  • J. Wang
  • A. AbeEmail author
Conference paper

Abstract

In this paper, a method using cavitation jet is proposed to remove marine creatures adhered to the body of a ship. The flow with the cavitation jet is produced using a high-pressure pump and cavitation nozzle with an orifice plate. Rebound shock waves are expected to be continuously generated in the cavitation jet flow. In order to observe the behaviors of the rebound shock waves, experiments are carried out using the Schlieren method in a water tank. From the results of the visualization, it is found the generation frequency of the rebound shock wave reaches its peak at a close position to the nozzle exit. The behaviors of the rebound shock waves are also investigated under the influence of a wall boundary beside a cavitation jet. The results show that the position where the maximum generation frequency is obtained is at several ten times of an orifice diameter from the nozzle exit, and the generation frequency decreases due to the effect of the wall boundary.

Notes

Acknowledgments

A part of the study was supported by JSPS KAKENHI Grant Number 16H04600. In addition, we also would like to sincerely thank NAC Image Technology Inc. for the supply of camera.

References

  1. 1.
    Nippon Yusen Kabushiki Kaisha NYK Report Business Management Strategy, 2014Google Scholar
  2. 2.
    W. Simon, Tributyltin pollution on a global scale, An overview of relevant and recent research: Impacts and issues, WWF Living Planet Report, 2006Google Scholar
  3. 3.
    N. Alert, Request for Assistance in Preventing Silicosis and Deaths From Sandblasting. (DHHS (NIOSH) Publication, 1992), pp. 92–102Google Scholar
  4. 4.
    M. Szymczak, S. Tavoularis, A. Fahim, M. Vijay, Flow visualization of Cavitating, high-speed, submerged water jets. J. Eng. Ind. 113(4), 485–489 (1991)Google Scholar
  5. 5.
    A. Guha, R.M. Barron, R. Balachandar, An experimental and numerical study of water jet cleaning process. J. Mater. Process. Technol. 211(4), 610–618 (2011)CrossRefGoogle Scholar
  6. 6.
    S. Sivakumar, R. Sangras, V. Raghavan, Characteristics of turbulent round jets in its potential-Core Region. J Mech Aeros Indus Mech Manuf Eng 6(1) (2012)Google Scholar

Copyright information

© Springer International Publishing AG, part of Springer Nature 2019

Authors and Affiliations

  1. 1.Graduate School of Maritime SciencesKobe UniversityKobeJapan
  2. 2.Key Laboratory for Mechanics in Fluid Solid Coupling SystemsInstitute of Mechanics, Chinese Academy of SciencesBeijingChina
  3. 3.School of Engineering Science, University of Chinese Academy of SciencesBeijingChina

Personalised recommendations