Advertisement

Study of Shock Impact Pressure Amplification and Attenuation of Acoustic Waves in E-Glass Material

  • Jayaram VishakantaiahEmail author
  • Kannan R. K. 
  • Arvind G. Raj 
  • K. P. J. Reddy
Conference paper

Abstract

In this paper we present the amplification of shock pressure and attenuation of acoustic emission (AE) due to the impact of shock waves on multilayer E-glass armor materials having density of about 2000 kg/m3 with thickness of 5 mm and 10 mm. Shock tubes are well known to produce desired shock strength for material interaction. In this work the E-glass material is made to interact with strong shock wave produced from material shock tube (MST). The peak pressure amplification at the back wall is caused by the transfer of gas momentum to the material mass. The 5-mm- and 10-mm-thick E-glass material shows the amplification of 10 and 3 times, respectively, with respect to the incident front-wall pressure at different Mach numbers. The AE is generated by sonic boom at the open end of the diaphragmless shock tube (DST). A constant shock Mach number of 1.3 is produced in the DST to study the attenuation characteristic of E-glass material. The E-glass materials were placed at different distance from the open end of the shock tube at an angle of 30° at either side of the shock tube axis to study the attenuation of AE. The result shows attenuation of about 42–4% for 5 mm and about 85–52% for 10 mm E-glass materials.

Notes

Acknowledgment

Financial supports from the projects of DRDO, ISRO, and STC-IISc of the Government of India are gratefully acknowledged. The author thanks Dr. Madhu V. and Mr. Jayarami Reddy from DMRL for providing E-glass material and Professor G. Jagadeesh from the Department of Aerospace Engineering, Indian Institute of Science, Bangalore, for his support and encouragement.

References

  1. 1.
    S.A. Tekalur, A.E. Bogdanovich, A. Shukla, Comput. Sci. Tech. 69, 736–753 (2009)CrossRefGoogle Scholar
  2. 2.
    K.P.J. Reddy, et al., Shock Interaction Studies on Glass Fibre Reinforced Epoxy Matrix Composites, ISSW-29, (Springer, Cham, 2015), pp. 127–134Google Scholar
  3. 3.
    M.W. Seitz et al., Effect of compressible foam properties on pressure amplification during shock wave impact. Shock Waves 15, 177–197 (2006)CrossRefGoogle Scholar
  4. 4.
    C.G. Thom et al., Shock wave amplification by fabric materials. Shock Waves 19, 736–753 (2009)CrossRefGoogle Scholar
  5. 5.
    V. Jayaram, et al., in Effect of Shock Induced Acoustic Emission and Shock Waves Impact on Polyurethane Foam, 8th International Symposium on NDT in Aerospace, Bangalore (2016)Google Scholar
  6. 6.
    W. Arnold, S. Stein, K. Dransfeld, J. Non-Cryst. Solids 14, 192–200 (1974)CrossRefGoogle Scholar
  7. 7.
    A. Teodorczyk et al., Detonation attenuation by foams and wire meshes lining the walls. Shock Waves 4, 225–236 (1995)CrossRefGoogle Scholar
  8. 8.
    N. Gardner, E. Wang, A. Shukla, Comput. Struct. 94, 1755–1770 (2012)CrossRefGoogle Scholar
  9. 9.
    A.G. Gaydon, I.R. Hurle, The Shock Tube in High Temperature Chemical Physics (Reinhold Publishing Corporation, New York, 1963)Google Scholar

Copyright information

© Springer International Publishing AG, part of Springer Nature 2019

Authors and Affiliations

  • Jayaram Vishakantaiah
    • 1
    Email author
  • Kannan R. K. 
    • 1
  • Arvind G. Raj 
    • 2
  • K. P. J. Reddy
    • 2
  1. 1.Shock Induced Materials Chemistry LaboratorySSCU, Indian Institute of ScienceBengaluruIndia
  2. 2.LHSR, Department of Aerospace EngineeringIndian Institute of ScienceBengaluruIndia

Personalised recommendations