Advertisement

Development and Performance Study of Shock Tube with Extended Test Time for Materials Research

  • Jayaram VishakantaiahEmail author
  • Gowtham Balasubramanian
  • Subba Rao Keshava
Conference paper

Abstract

This work focuses on the development of three unique types of high vacuum shock tubes for materials research. Shock tubes of various types such as simple material shock tube (MST), with extension (MST-E) and with reduction (MST-R) are studied. The major aim of this paper focuses on the augmentation of test time (tIE), reflected shock pressure (P5), and temperature (T5) and to get an ideal shock strength for material interaction. The simple MST has a 2.1 m driver and 5.1 m driven sections of inner diameter 80 mm, MST-E has a driver extension of 2.3 m long, and MST-R is equipped with an area reduction at the end of the driven section having a convergent nozzle for shock focusing with an addition of 1.2 m long tube. All the experiments are performed with air as a test gas at 1.0 bar. The experimental results show a variation of tIE of about 10% between the simple MST and MST-E. The MST-R shows an increase of P5 and T5 of about 60% and 15%, respectively, in the presence of air. Experimental results are compared with the 1-D normal shock relations (NSR) and KASIMIR software for validation. The results also show about 10–40% discrepancy between experiments and the various tools in all configurations. The experimental and theoretical results of all the three shock tube configurations are discussed in this paper.

Notes

Acknowledgments

Financial supports from ISRO and STC-IISc, Government of India, are gratefully acknowledged. The authors thank Prof. K P J Reddy, Prof. G. Jagadeesh, and Mr. Abishek Khatta from the Department of Aerospace Engineering, Indian Institute of Science, Bengaluru, for their support and fruitful discussions on shock tube physics.

References

  1. 1.
    R.J. Stalker, AIAA J. 5(12), 2160–2165 (1967)CrossRefGoogle Scholar
  2. 2.
    Z. Hong et al., The use of driver inserts to reduce non-ideal pressure variations behind reflected shock waves. Shock Waves 19, 113–123 (2009)CrossRefGoogle Scholar
  3. 3.
    A.R. Amadio et al., Test-time extension behind reflected shock waves using CO2-He and C3H8-He driver mixtures. Shock Waves 16, 157–165 (2006)CrossRefGoogle Scholar
  4. 4.
    R.A. Alpher, D.R. White, J. Fluid Mech. 3(5), 457–470 (1958)CrossRefGoogle Scholar
  5. 5.
    K. Izumi et al., Experimental and computational studies focusing processes of shock waves reflected from parabolic reflectors. Shock Waves 3, 213–222 (1994)CrossRefGoogle Scholar
  6. 6.
    B. Sturtevant, V.A. Kulkarny, J. Fluid Mech. 73(4), 651–671 (1976)CrossRefGoogle Scholar
  7. 7.
    M. Sommerfield, H.M. Muller, Exp. Fluids. 6, 209–216 (1988)CrossRefGoogle Scholar
  8. 8.
    V. Jayaram, Shock-induced reversible phase transformation from rutile to anatase in TiO2 powders, in SAMPE – 2016, Long Beach, 2016Google Scholar
  9. 9.
    M.F. Campbell et al., Strategies for obtaining long constant-pressure test times in shock tubes. Shock Waves 25, 651–665 (2015)CrossRefGoogle Scholar
  10. 10.
    A.G. Gaydon, I.R. Hurle, The Shock Tube in High-Temperature Chemical Physics (Reihold Publishing Corporation, New York, 1963)Google Scholar

Copyright information

© Springer International Publishing AG, part of Springer Nature 2019

Authors and Affiliations

  • Jayaram Vishakantaiah
    • 1
    Email author
  • Gowtham Balasubramanian
    • 1
  • Subba Rao Keshava
    • 2
  1. 1.Shock Induced Materials Chemistry Laboratory, SSCUIndian Institute of ScienceBengaluruIndia
  2. 2.Haldipur HydraulieksBengaluruIndia

Personalised recommendations