R. C. Beams Strengthened on Shear with FRP and FRCM Composites

  • J. H. Gonzalez-Libreros
  • C. Pellegrino
  • G. Giacomin
Conference paper
Part of the Lecture Notes in Civil Engineering book series (LNCE, volume 10)

Abstract

This paper presents the results obtained during an experimental campaign carried out in order to investigate the behaviour of reinforced concrete beams strengthened on shear with composite materials. In order to compare their performance, two different strengthening techniques were used: Fibre Reinforced polymers (FRP) and Fibre Reinforced Cementitious Matrix (FRCM) composites. The beams were simple supported and a traditional four point bending scheme was used to execute the tests. Midspan displacements were measured using linear variable transducers (LVDTS) while strain gauges were placed on the stirrups to measure strains.

Keywords

FRP FRCM Reinforced Concrete Shear Strengthening 

Notes

Acknowledgements

The first author would like to acknowledge the technical and economic support from the European Network for Durable Reinforcement and Rehabilitation Solutions (endure), a Marie Skłodowska Curie Initial Training Network. G&P Intech of Altavilla Vicentina (Italy) is gratefully acknowledged for providing the FRP and FRCM composite materials.

References

  1. ACI Committee 440 (2008) Guide for the design and construction of externally bonded FRP systems for strengthening concrete structures, ACI 440.2R-08, Farmington Hills, MI, U.S.A.Google Scholar
  2. Al-Salloum Y, Elsanadedy M, Alsayed S, Iqbal R (2012) Experimental and numerical study for the shear strengthening of reinforced concrete beams using textile-reinforced mortar. J Compos Constr 16:74–90CrossRefGoogle Scholar
  3. Blanksvard T, Taljsten B, Carolin A (2009) Shear strengthening of concrete structures with the use of mineral-based composites. J Compos Constr 1(25):25–34CrossRefGoogle Scholar
  4. Bousselham A, Chaallal O (2004) Shear strengthening reinforced concrete beams with fibre-reinforced polymer: assessment of influencing parameters and required research. ACI Struct J 101(2):219–227Google Scholar
  5. Chen GM, Teng JG, Chen JF, Rosenboom OA (2010) Interaction between steel stirrups and shear-strengthening FRP strips in RC beams. J Compos Constr 14(5):498–509CrossRefGoogle Scholar
  6. EN 12390-3 (2009) Testing hardened concrete – Part 3: Compressive strength of test specimens, European Committee for Standardization, Brussels, BelgiumGoogle Scholar
  7. EN 12390-5 (2009) Testing hardened concrete – Part 5: Flexural strength of test specimens, European Committee for Standardization, Brussels, BelgiumGoogle Scholar
  8. Federation Internationale du Beton, fib (2001) Externally Bonded FRP Reinforcement for RC Structures, Task Group 9.3, Bulletin No. 14, Lausanne, SwitzerlandGoogle Scholar
  9. Lima J, Barros J (2011) Reliability analysis of shear strengthening externally bonded FRP models. Proc Inst Civ Eng (ICE) – Struct Build 164(1):43–56CrossRefGoogle Scholar
  10. Ombres L (2015) Structural performances of reinforced concrete beams strengthened in shear with a cement based fibre composite material. Compos Struct 122:316–329CrossRefGoogle Scholar
  11. Pellegrino C, Modena C (2006) FRP shear strengthening of RC beams: experimental study and analytical modeling. ACI Struct J 103(5):720–728Google Scholar
  12. Pellegrino C, D’Antino T (2013) Experimental behaviour of existing precast prestressed reinforced concrete elements strengthened with cementitious composites. Compos Part B Eng 55:31–40CrossRefGoogle Scholar
  13. Pellegrino C, Vasic M (2013) Assessment of design procedures for the use of externally bonded FRP composites in shear strengthening of reinforced concrete beams. Compos Part B 45:727–741CrossRefGoogle Scholar
  14. Sas G, Täljsten B, Barros J, Lima J, Carolin A (2009) Are available models reliable for predicting the FRP contribution to the shear resistance of RC beams? J Compos Construct 13(6):514–534CrossRefGoogle Scholar
  15. Tetta ZC, Koutas LN, Bournas DA (2015) Textile reinforced mortar (TRM) versus fibre-reinforced polymers (FRP) in shear strengthening of concrete beams. Compos Part B 77:338–348CrossRefGoogle Scholar
  16. Triantafillou T, Papanicolaou CG, Zissinopoulos P, Laourdekis T (2006) Concrete confinement with textile-reinforced mortar jackets. ACI Struct J 103(1):28–37Google Scholar
  17. Triantafillou TC, Papanicolaou CG (2006) Shear strengthening of RC members with textile reinforced mortar (TRM) jackets. Mater Struct 39(1):85–93Google Scholar

Copyright information

© Springer International Publishing AG, part of Springer Nature 2018

Authors and Affiliations

  • J. H. Gonzalez-Libreros
    • 1
  • C. Pellegrino
    • 1
  • G. Giacomin
    • 2
  1. 1.Department of Civil, Environmental and Architectural EngineeringUniversity of PaduaPaduaItaly
  2. 2.G&P Intech S.r.l.Altavilla VicentinaItaly

Personalised recommendations