Design and Manufacture of a Sustainable Lightweight Prefabricated Material Based on Gypsum Mortar with Semirigid Polyurethane Foam Waste

  • Sara Gutiérrez González
  • Carlos Junco
  • Veronica Calderon
  • Ángel Rodríguez Saiz
  • Jesús Gadea
Conference paper

Abstract

The characterization of a new gypsum mortar-based composite material that incorporates various combinations of polyurethane waste in its matrix is reported in this paper. The new material, a lightweight plate for use in internal ceilings, is characterized in a series of standardized tests: bulk density, mechanical behavior, and the reaction to fire test. Moreover, the study details the industrial manufacturing process linked to the integration of waste from the plastics industry. Increased quantities of polymer waste caused significant reductions in bulk density and mechanical strength, although with reasonable behavior of the plates up to substitution levels of 50%. The non-combustibility test demonstrated the potential of the new material for interior use in buildings. The technology of the new gypsum mortar-based material and polyurethane waste could potentially maximize the reuse and the life-span of this type of waste that would otherwise be incinerated or dumped on landfill sites.

Notes

Acknowledgments

This study has been completed within the framework of the LIFE REPOLYUSE Project, LIFE 2016, Environment Life Programme by the European Commission.

References

  1. 1.
    Plastics-the Facts 2015. An analysis of European plastics production, demand and waste data.Google Scholar
  2. 2.
    Mounanga, P., Gbongbon, W., Poullain, P., & Turcry, P. (2008). Proportioning and characterization of lightweight concrete mixtures made with rigid polyurethane foam wastes. Cement and Concrete Composites, 30(9), 806–814.CrossRefGoogle Scholar
  3. 3.
    Gutiérrez-González, S., Gadea, J., Rodríguez, A., Junco, C., Calderón, V., Martín, A., & Campos, P. L. (2012). Spanish patent ES 2 386 116 B2.Google Scholar
  4. 4.
    Gutiérrez-González, S., Gadea, J., Rodríguez, A., Junco, C., & Calderón, V. (2012). Lightweight plaster materials with enhanced thermal properties made with polyurethane foam wastes. Construction and Building Materials, 28(1), 653–658.CrossRefGoogle Scholar
  5. 5.
    Alameda, L., Calderón, V., Junco, C., Rodríguez, A., Gadea, J., & Gutiérrez-González, S. (2016). Characterization of gypsum plasterboard with polyurethane foam waste reinforced with polypropylene fibers. Materiales de Construcción, 66(324), e100.CrossRefGoogle Scholar
  6. 6.
    EN 13279-1:2009 Gypsum binders and gypsum plasters. Definitions and requirements.Google Scholar
  7. 7.
    EN 13279-2:2004 Gypsum binders and gypsum plasters. Test methodsGoogle Scholar
  8. 8.
    EN 520:2005 Gypsum plasterboards. Definitions, specifications and test methods.Google Scholar
  9. 9.
    EN 14246:2007 Gypsum elements for suspended ceilings – Definitions, requirements and test methods.Google Scholar
  10. 10.
    Official Journal of the European Communities No L, p. 50. Directive 89/106/EEC as regards the classification of the reaction to fire performance of construction products 23.2.2000.Google Scholar

Copyright information

© Springer International Publishing AG, part of Springer Nature 2018

Authors and Affiliations

  • Sara Gutiérrez González
    • 1
  • Carlos Junco
    • 1
  • Veronica Calderon
    • 1
  • Ángel Rodríguez Saiz
    • 1
  • Jesús Gadea
    • 1
  1. 1.Department of Architectural ConstructionHigher Polytechnic School, University of BurgosBurgosSpain

Personalised recommendations