Thermal Cycling Induced Instability of Martensitic Transformation and the Micro-Mechanism in Solution-Treated Ni51Ti49 Alloy

  • Cai-You Zeng
  • Zhong-Xun Zhao
  • Yuan-Yuan Li
  • Shanshan Cao
  • Xiao Ma
  • Xin-Ping Zhang
Conference paper
Part of the The Minerals, Metals & Materials Series book series (MMMS)

Abstract

The effect of the maximum temperature of thermal cycling (Tmax) on the instability of martensitic transformation (MT) in the solution-treated Ni51Ti49 alloy was investigated by differential scanning calorimetry (DSC). Results manifest that the peak temperature of martensitic transformation (Mp) decreases linearly with the increase of cycle number, while the transformation hysteresis (H) increases linearly. The instability of MT is promoted by increasing Tmax from 20 to 100 °C, with variation of Mp increasing from 0.9 to 12.3 °C and variation of H increasing from 0.4 to 4.3 °C after 10 thermal cycles. Transmission electron microscopy (TEM) study demonstrates the appearance of transformation-induced dislocations in the NiTi matrix, which are responsible for the instability of MT. Moreover, the dislocation multiplication is obviously enhanced with the increase of Tmax during thermal cycling, as a result of the interaction between dislocations and quenched-in point defects (QIDs) in the solution-treated Ni-rich Ni51Ti49 alloy, which consequently leads to the temperature dependence of MT instability during thermal cycling.

Keywords

Thermal cycling Martensitic transformation instability Solution-treated NiTi alloy Quenched-in defect Transformation-induced dislocation 

Notes

Acknowledgements

This research was supported by the National Natural Science Foundation of China under Grant Nos. 51401081 and 51571092, and Key Project Program of Guangdong Provincial Natural Science Foundation under Grant No. S2013020012805.

References

  1. 1.
    Jaronie MJ, Leary M, Subic A, Gibson MA (2014) A review of shape memory alloy research, applications and opportunities. Mater Des 56:1078–1113CrossRefGoogle Scholar
  2. 2.
    Pelton AR (2011) Nitinol fatigue: a review of microstructures and mechanisms. J Mater Eng Perform 20:613–617CrossRefGoogle Scholar
  3. 3.
    Eggeler G, Hornbogen E, Yawny A, Heckmann A, Wagner M (2004) Structural and functional fatigue of NiTi shape memory alloys. Mat Sci Eng A378:24–33CrossRefGoogle Scholar
  4. 4.
    Urbina C, De la Flor S, Ferrando F (2009) Effect of thermal cycling on the thermomechanical behaviour of NiTi shape memory alloys. Mat Sci Eng A501:197–206CrossRefGoogle Scholar
  5. 5.
    Tong YX, Guo B, Chen F, Tian B, Li L, Zheng YF, Prokofiev EA, Gunderov DV, Valievc RZ (2012) Thermal cycling stability of ultrafine-grained TiNi shape memory alloys processed by equal channel angular pressing. Scripta Mater 67:1–4CrossRefGoogle Scholar
  6. 6.
    Pelton AR, Huang GH, Moine P, Sinclair R (2012) Effects of thermal cycling on microstructure and properties in Nitinol. Mat Sci Eng A532:130–138CrossRefGoogle Scholar
  7. 7.
    Kustov S, Mas B, Salas D, Cesari E, Raufov S, Nikolaev V, Van Humbeeck J (2015) On the effect of room temperature ageing of Ni-rich Ni–Ti alloys. Scripta Mater 103:10–13CrossRefGoogle Scholar
  8. 8.
    Wang XB, Van Humbeeck J, Verlinden B, Kustov S (2016) Thermal cycling induced room temperature aging effect in Ni-rich NiTi shape memory alloy. Scripta Mater 113:206–208CrossRefGoogle Scholar
  9. 9.
    Wagner MFX, Dey SR, Gugel H, Frenzel J, Somsen Ch, Eggeler G (2010) Effect of low-temperature precipitation on the transformation characteristics of Ni-rich NiTi shape memory alloys during thermal cycling. Intermetallics 18:1172–1179CrossRefGoogle Scholar
  10. 10.
    Cui J, Chu YS, Famodu OO, Furuya Y, Hattrick SJ, James RD, Ludwig A, Thienhaus S, Wuttig M, Zhang ZY, Takeuchi I (2006) Combinatorial search of thermoelastic shape-memory alloys with extremely small hysteresis width. Nature Mater 5:286–290CrossRefGoogle Scholar
  11. 11.
    Simon T, Kroger A, Somsen C, Dlouhy A, Eggeler G (2010) On the multiplication of dislocations during martensitic transformations in NiTi shape memory alloys. Acta Mater 58:1850–1860CrossRefGoogle Scholar
  12. 12.
    Zhang J, Somsen C, Simon T, Ding XD, Hou S, Ren S, Ren XB, Eggeler G, Otsuka K, Sun J (2012) Leaf-like dislocation substructures and the decrease of martensitic start temperatures: a new explanation for functional fatigue during thermally induced martensitic transformations in coarse-grained Ni-rich Ti-Ni shape memory alloys. Acta Mater 60:1999–2006CrossRefGoogle Scholar
  13. 13.
    Hamilton RF, Sehitoglu H, Chumlyakov Y, Maier HJ (2004) Stress dependence of the hysteresis in single crystal NiTi alloys. Acta Mater 52:3383–3402CrossRefGoogle Scholar
  14. 14.
    Ibarra A, Juan JS, Bocanegra EH, Nó ML (2007) Evolution of microstructure and thermomechanical properties during superelastic compression cycling in Cu-Al-Ni single crystals. Acta Mater 55:4789–4798CrossRefGoogle Scholar
  15. 15.
    Kustov S, Pons J, Cesari E, Van Humbeeck J (2004) Pinning-induced stabilization of martensite—part I: stabilization due to static pinning of interfaces. Acta Mater 52:3075–3081CrossRefGoogle Scholar

Copyright information

© The Minerals, Metals & Materials Society 2018

Authors and Affiliations

  • Cai-You Zeng
    • 1
  • Zhong-Xun Zhao
    • 1
  • Yuan-Yuan Li
    • 1
  • Shanshan Cao
    • 1
  • Xiao Ma
    • 1
  • Xin-Ping Zhang
    • 1
  1. 1.School of Materials Science and EngineeringSouth China University of TechnologyGuangzhouChina

Personalised recommendations