Advertisement

Energy Performance of a Renovated Multi-Family Building in Sweden

  • Lina La Fleur
  • Bahram Moshfegh
  • Patrik Rohdin
Conference paper

Abstract

Increased attention is being directed towards reducing energy use in buildings, and implementing energy-saving measures when renovating buildings has become of central importance. The aim of this chapter is to study the effects on heat demand of a deep renovation of a Swedish post-war, multi-family building. The studied building was renovated in 2014, and the renovation measures included thermal improvement of the climate envelope and installation of a mechanical supply and exhaust air ventilation system with heat recovery. The effect on heat demand is studied through a whole-building energy simulation, using IDA Indoor Climate and Energy. The IDA model is empirically validated with regard to its ability to predict indoor temperature and energy use. The results indicate a technical potential for a 50.3 % reduction of heat demand from implemented renovation measures, but measured data indicate that actual energy use is around 15 % higher than the technical potential. The reasons for this gap could be overestimated heat recovery efficiency or airing.

Notes

Acknowledgement

This study was funded by the Swedish Research Council Formas. The authors are grateful to the property owner and occupants for granting access to the building and reference apartments.

References

  1. 1.
    Johansson TB, Patwardhan A, Nakićenović NA, Gomez-Echeverri L (2012) Global energy assessment (GEA). Cambridge University Press, CambridgeCrossRefGoogle Scholar
  2. 2.
    Lechtenböhmer S, Schüring A (2010) The potential for large-scale savings from insulating residential buildings in the EU. Energy Efficiency 4(2):257–270CrossRefGoogle Scholar
  3. 3.
    Galvin R (2010) Thermal upgrades of existing homes in Germany: the building code, subsidies, and economic efficiency. Energy Build 42(6):834–844CrossRefGoogle Scholar
  4. 4.
    Morelli M, Rønby L, Mikkelsen SE, Minzari MG, Kildemoes T, Tommerup HM (2012) Energy retrofitting of a typical old Danish multi-family building to a “nearly-zero” energy building based on experiences from a test apartment. Energy Build 54:395–406CrossRefGoogle Scholar
  5. 5.
    Liu L, Moshfegh B, Akander J, Cehlin M (2014) Comprehensive investigation on energy retrofits in eleven multi-family buildings in Sweden. Energy Build 84:704–715CrossRefGoogle Scholar
  6. 6.
    Ryan EM, Sanquist TF (2012) Validation of building energy modeling tools under idealized and realistic conditions. Energy Build 47:375–382CrossRefGoogle Scholar
  7. 7.
    Sahlin P, Eriksson L, Grozman P, Johnsson H, Shapovalov A, Vuolle M (2004) Whole-building simulation with symbolic DAE equations and general purpose solvers. Build Environ 39(8):949–958CrossRefGoogle Scholar
  8. 8.
    Jensen SO (1995) Validation of building energy simulation programs—a methodology. Energy Build 22(2):133–144CrossRefGoogle Scholar
  9. 9.
    Coakley D, Raftery P, Keane M (2014) A review of methods to match building energy simulation models to measured data. Renew Sustain Energy Rev 37:123–141CrossRefGoogle Scholar
  10. 10.
    Bring A, Sahlin P, Voulle M (1999) Models for building indoor climate and energy simulation. In: Report of IEA Task 22: building energy analysis tools, Subtask B: model documentationGoogle Scholar

Copyright information

© Springer International Publishing Switzerland 2017

<SimplePara><Emphasis Type="Bold">Open Access</Emphasis> This chapter is licensed under the terms of the Creative Commons Attribution-NonCommercial 2.5 International License (http://creativecommons.org/licenses/by-nc/2.5/), which permits any noncommercial use, sharing, adaptation, distribution and reproduction in any medium or format, as long as you give appropriate credit to the original author(s) and the source, provide a link to the Creative Commons license and indicate if changes were made. </SimplePara> <SimplePara>The images or other third party material in this chapter are included in the chapter's Creative Commons license, unless indicated otherwise in a credit line to the material. If material is not included in the chapter's Creative Commons license and your intended use is not permitted by statutory regulation or exceeds the permitted use, you will need to obtain permission directly from the copyright holder.</SimplePara>

Authors and Affiliations

  • Lina La Fleur
    • 1
  • Bahram Moshfegh
    • 1
    • 2
  • Patrik Rohdin
    • 1
  1. 1.Division of Energy SystemsDepartment of Management and Engineering, Linköping UniversityLinköpingSweden
  2. 2.Division of Building, Energy, and Environment TechnologyDepartment of Technology and Environment, University of GävleGävleSweden

Personalised recommendations