Advertisement

Failure Risk and Control of Nitrogen Trifluoride Tube-Bundle Container

  • Jie TangEmail author
  • Mao Cheng
  • Wenhong Cao
  • Zhangwei Ling
Conference paper
  • 17 Downloads
Part of the Advances in Intelligent Systems and Computing book series (AISC, volume 1146)

Abstract

Due to the rapid development of Chinese semiconductor industry and the expansion of chip manufacturing capacity, the storage and transportation of electronic special gas in ordinary gas cylinders has been unable to meet the demand. High pressure liquefied gas tube-bundle container is a better solution. Since 2017, Chinese machine manufacturer has started to be approved cautiously to manufacture high pressure liquefied gas tube-bundle container, including nitrogen trifluoride. But objectively speaking, the domestic regulations and standards about special equipment do not support the tube-bundle container containing high pressure liquefied gas. It is very important to identify the failure risk accurately. Through the analysis of the supervision mode and failure mode of high pressure liquefied gas tube-bundle container, six possible failure modes, including fatigue failure, ductile failure, brittle failure, corrosion failure, leakage failure and frame structure failure, were proposed. The corresponding risk control measures are studied, and relevant Suggestions are given to ensure the safety of tube-bundle container.

Keywords

Tube-bundle container Large volume seamless steel cylinders Nitrogen trifluoride Risk assessment 

Notes

Acknowledgements

This research was supported by Major Special Project of Science Technology Department of Zhejiang province (project number: 2018C01064).

References

  1. 1.
    Cui, Y., Liu, Y., Hou, X.: Liquefed gas storage and transportation feasibility with tube trailer or tube skid. Chin. Spec. Equip. Saf. 32(9), 1–4 (2016). (in Chinese)Google Scholar
  2. 2.
    Dong, H., Li, B., Bo, K.: Development of safety technology for long tube trailer in China. Chin. Spec. Equip. Saf. 30(8), 1–5 (2014). (in Chinese)Google Scholar
  3. 3.
    Wang, L.: The present situation and safe use of long tube trailer in China. Chin. Spec. Equip. Saf. 27(6), 51–53 (2011). (in Chinese)Google Scholar
  4. 4.
    Dong, H., Li, B.: Manufacturability evaluation of large volume seamless gas cylinder pipe based on TPS. J. Mater. Appl. 3(1), 45–51 (2014)Google Scholar
  5. 5.
    Xue, X., Yao, J., Xiao, B.: Inspection and safety of long tube trailer. Chin. Spec. Equip. Saf. 25(12), 65–66 (2009). (in Chinese)Google Scholar
  6. 6.
    General Administration of Quality Supervision: Inspection and Quarantine of the People’s Republic of China: TSG R0005-2011 Supervision regulation on safety technology for transportable pressure vessel. Xinhua Press, Beijing (2011). (in Chinese)Google Scholar
  7. 7.
    Dong, H., Li, B., Bo, K., et al.: Evaluation index of drum cylinder for long tube trailer. Press. Vessels 28(11), 59–63 (2011). (in Chinese)Google Scholar
  8. 8.
    Yu, Q.: International Maritime Dangerous Goods Code. Intellectual Property Press, Beijing (2010). (in Chinese)Google Scholar
  9. 9.
    General Administration of Quality Supervision: Inspection and Quarantine of the People’s Republic of China: GB/T 21287-2007 Gases for electronic industry-nitrogen tirfluoride. Standards Press of China, Beijing (2007). (in Chinese)Google Scholar
  10. 10.
    Ding, J., He, X.: Structural improvement for the frame structure of tube bundle container. Mach. Des. Manuf. 8, 82–85 (2015). (in Chinese)Google Scholar
  11. 11.
    General Administration of Quality Supervision: Inspection and Quarantine of the People’s Republic of China: GB/T 16563-2017 Series 1 freight containers-specification and testing-tank containers for liquids, gases and pressurized dry bulk. Standards Press of China, Beijing (2017). (in Chinese)Google Scholar

Copyright information

© Springer Nature Switzerland AG 2020

Authors and Affiliations

  • Jie Tang
    • 1
    • 2
    Email author
  • Mao Cheng
    • 1
    • 2
  • Wenhong Cao
    • 3
  • Zhangwei Ling
    • 1
    • 2
  1. 1.Zhejiang Academy of Special Equipment ScienceHangzhouChina
  2. 2.Key Laboratory of Special Equipment Safety Testing Technology of Zhejiang ProvinceHangzhouChina
  3. 3.Zhejiang Rein Gas Equipment Co., Ltd.ShaoxingChina

Personalised recommendations