Advertisement

Pt‑Based Catalysts for Electrochemical Oxidation of Ethanol

  • Nebojsa S. MarinkovicEmail author
  • Meng Li
  • Radoslav R. Adzic
Chapter
  • 33 Downloads
Part of the Topics in Current Chemistry Collections book series (TCCC)

Abstract

Despite its attractive features as a power source for direct alcohol fuel cells, utilization of ethanol is still hampered by both fundamental and technical challenges. The rationale behind the slow and incomplete ethanol oxidation reaction (EOR) with low selectivity towards CO2 on most Pt-based catalysts is still far from being understood, and a number of practical problems need to be addressed before an efficient and low-cost catalyst is designed. Some recent achievements towards solving these problems are presented. Pt film electrodes and Pt monolayer ( PtML) electrodes on various single crystal substrates showed that EOR follows the partial oxidation pathway without C–C bond cleavage, with acetic acid and acetaldehyde as the final products. The role of the substrate lattice on the catalytic properties of PtML was proven by the choice of appropriate M(111) structure (M = Pd, Ir, Rh, Ru and Au) showing enhanced kinetics when PtML is under tensile strain on Au(111) electrode. Nanostructured electrocatalysts containing Pt–Rh solid solution on SnO2 and Pt monolayer on non-noble metals are shown, optimized, and characterized by in situ methods. Electrochemical, in situ Fourier transform infrared (FTIR) and X-ray absorption spectroscopy (XAS) techniques highlighted the effect of Rh in facilitating C–C bond splitting in the ternary PtRh/SnO2 catalyst. In situ FTIR proved quantitatively the enhancement in the total oxidation pathway to CO2, and in situ XAS confirmed that Pt and Rh form a solid solution that remains in metallic form through a wide range of potentials due to the presence of SnO2. Combination of these findings with density functional theory calculations revealed the EOR reaction pathway and the role of each constituent of the ternary PtRh/SnO2 catalyst. The optimal Pt:Rh:Sn atomic ratio was found by the two in situ techniques. Attempts to replace Rh with costeffective alternatives for commercially viable catalysts has shown that Ir can also split the C–C bond in ethanol, but the performance of optimized Pt–Rh–SnO2 is still higher than that of the Pt–Ir–SnO2 catalyst.

Keywords

Platinum-based catalysts Ethanol oxidation In situ FTIR In situ EXAFS 

Preview

Unable to display preview. Download preview PDF.

Unable to display preview. Download preview PDF.

Copyright information

© Springer Nature Switzerland AG 2020

Authors and Affiliations

  1. 1.Synchrotron Catalysis Consortium and Columbia UniversityNew YorkUSA
  2. 2.Brookhaven National LaboratoryUptonUSA

Personalised recommendations