Advertisement

Magnetic Permeability Tensor with Saturation Flux Density Description for 2D Materials with Uniaxial Anisotropy

  • Roman SzewczykEmail author
Conference paper
  • 76 Downloads
Part of the Advances in Intelligent Systems and Computing book series (AISC, volume 1140)

Abstract

During the development of advanced models of mechatronics devices with cores made of anisotropic soft magnetic materials, magnetic permeability has to be described as tensor. However commonly used tensor magnetic permeability descriptions doesn’t consider saturation phenomenon for flux density. As a result accuracy of such simulations is significantly limited, especially for higher values of magnetizing field. Paper is proposing new method of magnetic permeability description considering saturation flux density. Proposed concept is based on the anisotropy energy analyze and was verified for magnetization curve of soft magnetic materials with uniaxial anisotropy. Results of modeling confirm good agreement with the results experimental measurements for soft magnetic materials with uniaxial anisotropy.

Keywords

Magnetic anisotropy Soft magnetic materials Tensor description of magnetic permeability 

References

  1. 1.
    Gibbs, M.R.J.: Anisotropy and magnetostriction in amorphous alloys. J. Magn. Magn. Mater. 83, 329–333 (1990).  https://doi.org/10.1016/0304-8853(90)90536-YCrossRefGoogle Scholar
  2. 2.
    Chwastek, K., Baghel, A.P.S., Wodzynski, A., Kulkarni, S.: Anisotropic properties of electrical steel. In: Computational Problems of Electrical Engineering CPEE 2015, Lviv, Ukraine (2015).  https://doi.org/10.1109/CPEE.2015.7333328
  3. 3.
    Jiles, D.C.: Introduction to Magnetism and Magnetic Materials. CRC Press, Boca Raton (2015)Google Scholar
  4. 4.
    Dahle, O.: The pressductor and the torductor — two heavy-duty transducers based on magnetic stress sensitivity. IEEE Trans. Commun. Electron. 83, 752–758 (1964).  https://doi.org/10.1109/TCOME.1964.6592601CrossRefGoogle Scholar
  5. 5.
    Nowicki, M.: Tensductor—amorphous alloy based magnetoelastic tensile force sensor. Sensors 18, 4420 (2018).  https://doi.org/10.3390/s18124420CrossRefGoogle Scholar
  6. 6.
  7. 7.
  8. 8.
    Ramesh, A., Jiles, D.C., Roderik, J.: A model of anisotropic anhysteretic magnetization. IEEE Trans. Magn. 32, 4234–4236 (1996)CrossRefGoogle Scholar
  9. 9.
    Szewczyk, R.: Validation of the anhysteretic magnetization model for soft magnetic materials with perpendicular anisotropy. Materials 7, 5109–5116 (2014).  https://doi.org/10.3390/ma7075109CrossRefGoogle Scholar
  10. 10.
    Frydrych, P., Szewczyk, R., Nowicki, M., Charubin, T.: Application of anisotropic vector Preisach model for bulk materials. Acta Phys. Pol. A 131, 618–620 (2017).  https://doi.org/10.12693/APhysPolA.131.618CrossRefGoogle Scholar
  11. 11.
    O’Handley, R.C.: Modern Magnetic Materials: Principles and Applications. Wiley, New York (1999)Google Scholar
  12. 12.
    Buttino, G., Poppi, M.: Dependence on the temperature of magnetic anisotropies in Fe-based alloys of Finemet. J. Magn. Magn. Mater. 170, 211–218 (1997).  https://doi.org/10.1016/S0304-8853(97)00005-XCrossRefGoogle Scholar
  13. 13.
    Svec Sr., P., Szewczyk, R., Salach, J., Jackiewicz, D., Svec, P., Bieńkowski, A., Hosko, J.: Magnetoelastic properties of selected amorphous systems tailored by thermomagnetic treatment. J. Electr. Eng. 65, 259–261 (2014).  https://doi.org/10.2478/jee-2014-0040CrossRefGoogle Scholar

Copyright information

© Springer Nature Switzerland AG 2020

Authors and Affiliations

  1. 1.Łukasiewicz Research Network – Industrial Research Institute for Automation and Measurements PIAPWarsawPoland

Personalised recommendations